• Title/Summary/Keyword: CV Joint

Search Result 48, Processing Time 0.02 seconds

Using Chemical and Biological Approaches to Predict Energy Values of Selected Forages Affected by Variety and Maturity Stage: Comparison of Three Approaches

  • Yu, P.;Christensen, D.A.;McKinnon, J.J.;Soita, H.W.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.17 no.2
    • /
    • pp.228-236
    • /
    • 2004
  • Two varieties of alfalfa (Medicago sativa L cv. Pioneer and Beaver) and timothy (Phleum pratense L cv. Climax and Joliette), grown at different locations in Saskatchewan (Canada), were cut at three stages [1=one week before commercial cut (early bud for alfalfa; joint for timothy); 2=at commercial cut (late bud for alfalfa; pre-bloom head for timothy); 3=one week after commercial cut (early bloom for alfalfa; full head for timothy)]. The energy values of forages were determined using three approaches, including chemical (NRC 2001 formula) and biological approaches (standard in vitro and in situ assay). The objectives of this study were to determine the effects of forage variety and stage of maturity on energy values under the climate conditions of western Canada, and to investigate relationship between chemical (NRC 2001 formula) approach and biological approaches (in vitro and in situ assay) on prediction of energy values. The results showed that, in general, forage species (alfalfa vs. timothy) and cutting stage had profound impacts, but the varieties within each species (Pioneer vs. Beaver in alfalfa; Climax vs. Joliette in timothy) had minimal effects on energy values. As forage maturity increased, the energy contents behaved in a quadratic fashion, increasing at stage 2 and then significantly decreasing at stage 3. However, the prediction methods-chemical approach (NRC 2001 formula) and biological approaches (in vitro and in situ assay) had great influences on energy values. The highest predicted energy values were found by using the in situ approach, the lowest prediction value by using the NRC 2001 formula, and the intermediate values by the in vitro approach. The in situ results may be most accurate because it is closest to simulate animal condition. The energy values measured by biological approaches are not predictable by the chemical approach in this study, indicating that a refinement is needed in accurately predicting energy values.

Kinematic Analysis of The Rider Postural Alignments According to The Fitting of Stirrups Lengths during Horse Walk of High Level Rider (승마 평보 시 숙련자의 등자길이 피팅에 따른 기승자세정열의 운동학적 비교분석)

  • Ryew, Che-Cheong;Hyun, Seung-Hyun
    • Korean Journal of Applied Biomechanics
    • /
    • v.24 no.4
    • /
    • pp.329-338
    • /
    • 2014
  • The purpose of this study was to analyze of the rider postural alignments according to the fitting of stirrups lengths during walk of high level riders. Participants selected as subject were consisted of horse riders of high level (age: $47.66{\pm}3.51yrs$, height: $168.40{\pm}4.84cm$, body weight: $73.36{\pm}15.58kg$, low extremity length: $94.76{\pm}3.98cm$, career: $23.33{\pm}5.77yrs$) and walk with 3 types of stirrup lengths(ratio of low extremity 68.04%, 73.25%, 78.48%). The variables analyzed were consisted of the displacement of Y axis (center of mass, head, thigh, shank and foot), FR angle, LR angle, dynamic postural stability index (DPSI), coefficient of variation (CV%), and distance (X axis) of low extremity limb between right and left. The displacement of Y axis in COM, thigh, shank, foot limbs were not statistically significant, but movements of head showed greater distance of B type and C type than that of A type during 1 stride of walk. The FR and LR angle in trunk of horse rider, dynamic postural stability index and, coefficient of variation didn't show significant difference statistically according to the fitting of stirrup lengths. Also the distance (X axis) of low extremity in thigh and shank didn't show significant difference statistically in between right and left, but right and left foot showed greater distance in C type than that of B and A types during walk in horse back riding. The hip and ankle joint angle not statistically significant according to stirrups lengths, But knee joint angle showed more extended according to the increase of stirrups lengths during stance and swing phase in walk.

A Design and Implementation of Natural User Interface System Using Kinect (키넥트를 사용한 NUI 설계 및 구현)

  • Lee, Sae-Bom;Jung, Il-Hong
    • Journal of Digital Contents Society
    • /
    • v.15 no.4
    • /
    • pp.473-480
    • /
    • 2014
  • As the use of computer has been popularized these days, an active research is in progress to make much more convenient and natural interface compared to the existing user interfaces such as keyboard or mouse. For this reason, there is an increasing interest toward Microsoft's motion sensing module called Kinect, which can perform hand motions and speech recognition system in order to realize communication between people. Kinect uses its built-in sensor to recognize the main joint movements and depth of the body. It can also provide a simple speech recognition through the built-in microphone. In this paper, the goal is to use Kinect's depth value data, skeleton tracking and labeling algorithm to recognize information about the extraction and movement of hand, and replace the role of existing peripherals using a virtual mouse, a virtual keyboard, and a speech recognition.

A Study on the Elimination of Surface Defect and Increase in Tool Life of the Warm Forged Spider (온간 스파이더 표면결함 개선과 금형수명 향상에 관한 연구)

  • Kang, Jong-Hun
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.19 no.5
    • /
    • pp.82-90
    • /
    • 2020
  • Due to the complicated shape of the spider, the production method was changed from cold to warm forging. Finite element analysis was performed to predict the forging load and shape using the enclosed hydraulic die set. As the forging load increases due to the spider die volume, die stress analyses were performed to optimize the die design in order to reduce the die stress in various conditions. Large deformation while producing the complicated forging parts induces high forging load, which is one of the main parameters of the forging surface defects. The forging process was analyzed to find out the root cause of the surface defects generated during the spider production for various parameters, thereby revealing that the radius of die in the defect zone influenced the air trap depth, being the root cause of the surface defect. It was verified that die life was increased and the surface defect was eliminated by changing the die design during the mass production test.

The Kinetic and Kinematic Effect of a 12-week Aquatic Exercise Program on Obstacle Gait in Older Women (12주간 수중운동이 노인여성의 장애물보행에 미치는 운동학 및 운동역학적 영향)

  • Choi, Pyoung-Hwa;Yoon, Suk-Hoon
    • Korean Journal of Applied Biomechanics
    • /
    • v.20 no.2
    • /
    • pp.129-137
    • /
    • 2010
  • The purpose of this study is to investigate the effect of a 12-week aquatic exercise on obstacle gait in older women. Originally, 20 healthy female elderly participated this study but 12 of them completed the program. All participants were trained in the aquatic exercise program by an authorized trainer. They had come to the authors' lab three times during training period(0, 6, 12 weeks) and performed obstacle gait with three different height(0, 30, and 50% of leg length). After performed 3-Dimensional motion analysis following results were found. (1) For the CV, MVHC, TC, HC, statistically significances were shown in obstacle height. Although significant training effects were not shown, all variables showed typical patterns and it was considered as efficient motion to overcome the height obstacles. (2) The anterior-posterior and vertical GRF of support leg during support phase were revealed in height effect but in training one. However, differences between Peak 1 and Peak 2 in vertical GRF increased as training period increased. (3) Knee and hip resultant joint moments were affected by training but ankle resultant moments remained unchanged.

Population Pharmacokinetics for Gentamicin in American and Korean-American Appendicitis Patients Using Nonparametric Expected Maximum(NPEM) Algorithm (비모수적 기대최대치(NPEM)연산방법에 의한 미국인과 재미동포 충수돌기염 환자에게 겐타마이신의 모집단 약물동태학)

  • ;;Stanford Jhee;Gill, Mark A.
    • YAKHAK HOEJI
    • /
    • v.39 no.2
    • /
    • pp.103-112
    • /
    • 1995
  • Population pharmacokinetics for gentamicin were compared with 24 American patients (16 male and 8 female) and 16 Korean-American appendicitis patients(12 male and 4 female). Two to six blood specimens were collected from all patients at the following times: just before a regularly scheduled infusion and at 1/2 hour after the end of a 1/2 hour infusion. Nonparametric expected maximum(NPEM) algorithm for population modeling was used. The estimated parameters were the elimination rate constant(K), the slope of the relationship between K versus creatinine clearance(KS), the apparent volume of distribution(V), the slope of the relationship between V versus weight(VS), gentamicin clearance(CL) and the slope of the relationship between CL versus creatinine clearance and the VS(CS). The output includes a 3-dimensional plot of the joint probability density function(PDF), two marginal PDF, means, medians, modes, variance, skewness, kurtosis, and CV%. The mean K(KS) were 0.424$\pm$0.139(0.00429$\pm$0.00164) and 0.411$\pm$0.135 hr$^{-1}$ (0.00475$\pm$0.00180[hr.mL/min/1.73m$^{2}]^{-1}$) for American and Korean-American populations, respectively. The mean V(VS) were not different at 15.6$\pm$4.77(0.233$\pm$0.0526) and 15.1$\pm$3.84L(0.239$\pm$0.0492 L/kg) for American and Korean-American populations, respectively (P>0.2). The mean CL (CS) were 6.28$\pm$1.85(0.0634$\pm$0.0191) and 5.70$\pm$1.77 L/hr(0.0701$\pm$0.0215 L/kg[hr.mL/min/1.73m$^{2}$)] for American and Korean-American populations, respectively. There are no differences in gentamicin pharmacokinetics between American and Korean-American Appendicitis patients.

  • PDF

Manufacturing and Establishment of the 2nd National Standard for Varicella Vaccine (수두생바이러스백신 국가표준품 (2차) 제조 및 확립에 관한 연구)

  • Kim, Yeon-Hee;Kim, Do-Keun;Sohn, Yeo-Won;Han, Eui-Ri;Kim, Seok-Hwan;Lim, Jong-Mi;Won, Yun-Jung;Yoon, Heui-Seong;Jo, Moon-Hee;Kim, Kwan-Soo;Kim, Jae-Ok
    • KSBB Journal
    • /
    • v.25 no.6
    • /
    • pp.572-576
    • /
    • 2010
  • Biological products, such as live varicella vaccine, are composed of biological substances derived from biological organisms. It is very difficult to identify these biologics' characteristics by analysis of simple physical and chemical methods alone. So the reference material is essential in order to evaluate the quality of bilogics. The 1'st national standard for varicella live vaccine was manufactured, established in 2002 and 2003, and have been used for the manufacturer's quality control and national lot release since then. As the lack of its availability and the decrease of its stability, this study was initiated by National Institute of Food and Drug Safety Evaluation (NiFDS) in 2008 to manufacture and establish the 2nd national standard for varicella live vaccine. The candidate material was manufactured from one of domestic manufacterers and the joint research of the NiFDS and manufacturers of varicella live vaccine was conducted to estimate of the reliable virus content. In the collaborative study, 3 laboratories including NiFDS performed the virus content test more than 7 times and all assay results were statistically analyzed. The mean coefficient of variation (CV) was 1.24%, and the geometric mean titre (GMT) variation range of each laboratory was low. On the basis of the results of this study, the candidate material of 2nd national standard for varicella live vaccine was assigned a potency of 4.26 log10 pfu/0.5 mL, when reconstituted in 0.7 mL.

A Review of the Clinical Study Trends on Korean Medicine Treatment for Polycystic Ovary Syndrome (다낭성 난소 증후군의 한의학적 치료에 대한 국내 임상 연구 고찰)

  • Cho, Yu-Jin;Lee, Yoon-Jae;Ahn, Young-Tae;Kang, Eun-Sol;Kim, Hyo-Jeong;Hong, Doo-Hyun;Park, Kyoung-Sun
    • The Journal of Korean Obstetrics and Gynecology
    • /
    • v.35 no.2
    • /
    • pp.87-105
    • /
    • 2022
  • Objectives: The purpose of this study is to analysis the Clinical Study Trends on Korean Medicine Treatment for Polycystic Ovary Syndrome. Methods: The key words such as 'polycystic ovary syndrome', 'polycystic ovarian syndrome', 'korean medicine', 'herbal medicine', 'acupuncture' are used for the research through 'OASIS', 'KCI', 'KISS', 'RISS'. Results: Ten clinical studies with 73 patients were selected. All studies were the noncomparative studies, and 8 case reports, 1 case series, 1 retrospective chart review. Symptoms accompanied by PCOS were oligomenorrhea, amenorrhea, irregular menstruation, hirsutism, acne, obesity etc. The most used treatment was herbal medicine in all studies with 72 patients (98.6%). The most frequently used acupuncture and moxibustion point was respectively 合谷 (LI4) and 關元 (CV4). The duration of treatment was between 3 months and 10 months, the average 159 days. Outcome measurements were Recovery of menstrual cycle (97.6%), Hormone test (23.8%), Sonogram (61.9%), Indexes of obesity (23.8%). In terms of menstrual recovery, 35 patients (85.4%) have recovered from menstruation in 8 studies with 41 patients. In hormone tests, all 10 patients have decrease of LH/FSH ratio and LH in 3 studies with 10 patients. Through sonogram, Ovulation menstruation was confirmed in all 6 patients. In all 10 patients of 3 studies evaluating weight before and after treatment, weight was reduced. Conclusions: The effect on Korean Medicine treatment for Polycystic Ovary Syndrome had mostly positive results. However, Further large, well-designed clinical trials are needed to establish the foundation of Korean Medicine treatment for Polycystic Ovary Syndrome.