• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1909-1913
• /
• 2022

This work shows the technical feasibility to obtain uranium tetrafluoride through an electrochemical mercury cell. This technique represents a custom scaling-up methodology from our previous studies to obtain UF₄ using the dropping mercury electrode cell. The UF₄ products were obtained from natural UF₆ gas, which was hydrolyzed to obtain a 50 g/L UO₂F₂ solution. The electrolysis cell was made using a mercury reservoir, to reach UF₄ production rates of 1 Kg UF₄/day. This custom design allowed a stable UF₄ production thanks to the mercury cathode, which do not permit the accumulation of solid products in its surface. The cell was tested using current densities from 5.000 to 17.500 A/m² and temperatures from 25 to 65 ℃. The maximum current efficiency achieved under these conditions was 80%. The UF₄ powders possessed spherical morphology, with diameters between 20 and 80 ㎛. Compared to the SnCl₂ precipitation, this process did not allow preferential growth of the precipitates. This improved the compaction of the UF₄ - Mg powders mixtures, with densities between 3.0 and 3.5 g/cm³. The purity of the UF₄ products was over 98%.

• Clinical Pain
• /
• v.19 no.1
• /
• pp.40-44
• /
• 2020

The foot or lower extremity is rarely the initial site in adult-onset dystonia, whereas dystonia in children often begins in the foot. Isolated lower extremity dystonia in adults is rarely on a primary basis. Oral anti-dystonic medications have been found unsatisfactory in providing adequate symptomatic relief. On the other hand, botulinum toxin injections have been reported as beneficial. It is also known that personalized orthosis can be an effective solution for patients of dystonia. The purpose of this report is to demonstrate a case of primary focal foot dystonia that was effectively treated with botulinum toxin injection and the custom-made ankle-foot orthosis.

• Journal of the Korean Society of Visualization
• /
• v.21 no.1
• /
• pp.110-118
• /
• 2023

Characterizing the extensional rheological properties of non-Newtonian fluids is crucial in many industrial processes, such as inkjet printing, injection molding, and fiber engineering. However, educational institutions and research laboratories with budget constraints have limited access to an expensive commercial extensional rheometer. In this study, we developed a custom-made extensional rheometer using a CO₂ laser cutting machine and 3D printer. Furthermore, we utilized a smartphone with a low-cost microscopic lens for achieving a high spatial resolution of images. The aqueous polyethylene-oxide (PEO) solutions and a Boger fluid were prepared to characterize their extensional properties. A transition from a visco-capillary to an elasto-capillary regime was observed clearly through the developed rheometer. The extensional relaxation time and viscosity of the aqueous PEO solutions with a zero-shear viscosity of over 300 mPa·s could be quantified in the elasto-capillary regime. The extensional properties of the solutions with relatively small zero shear viscosity could be calculated using a smartphone's slow-motion feature with increasing temporal resolution of the images.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.12 s.138
• /
• pp.1605-1616
• /
• 2004

The purpose of this study was to investigate the commonly accepted ease for a custom-fit business jacket, which provides all customers with the optimum fit regarding their individual body sizes, shapes as well as their personal preference, and also to characterize the factors which affects the ease amount, thereby, supply the reference data to manufacturers of the apparel industry. This study consisted of anthropometric measurements as well as sensory evaluations, and analysed ease amount by body sizes, ages, fit satisfaction, self-perception of body, and the prefered fit levels. There were 272 subjects for anthropometric measurement of which 128 subjects were applied for ease analysis and sensory evaluation. The subjects were males of 20 to 65 years old. The ease at chest was the most sensitive to body sizes and shapes, while waist and hip were easily modified to accommodate the silhouette of the jacket. The main dimensions affecting individual perceptions of fit and ease were the characteristics of body shape, in particular, girth, followed by age. Customers paided most attention to the shoulder fit while customers who preferred a more fitted line showed more concern with ease for jacket fit. It was clearly observable in case of waist fit preference. In addition, the preferred fit at chest, waist and hip would be changed by the perception of ons's hip size.

• Korean Journal of Environment and Ecology
• /
• v.26 no.5
• /
• pp.812-826
• /
• 2012

The selection rate of tree burials (TB) is still low in spite of increasing concerns about TB and government's efforts to increase TB participation. It is necessary to understand the factors affecting TB selection. This study investigated the relationship between major variables (attitude: ATT; subjective norm: SN; perceived behavioral control: PBC) of Ajzen's theory of planned behavior (TPB), additional variable (custom: CUST), and intention to select TB by using structural equation modelling (SEM). Samples were selected from Gwang-ju citizens using proportionate stratified sampling (PST) by region during September of 2011. Four hundred and twelve responses were used for data analysis. The model showed fair goodness of fit. All four variables (ATT, SN, PBC, CUST) influenced intention to select TB. The four variables explained 53.0% of intention to select TB. SN(${\beta}$=0.459) was the most predictive variable on the intention, followed by ATT(${\beta}$=0.247), PBC(${\beta}$=0.152), and CUST(${\beta}$=0.102) in decreasing order. The results were discussed and some suggestions to increase the intention of tree burial selection were made.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.2
• /
• pp.124-133
• /
• 2014

The study on Musa basjoo planting in traditional gardens in of folk villages and traditional temples was conducted to identify the phenomenon of Musa basjoo planting which frequently appears in paintings and literatures of the late Joseon dynasty and how the cultural custom is being handed down. The result of the study is as follows. As a result of studying state-designated folk villages 6 sites, the custom is being handed down in a few limited gardens including Asan Oeam Village and Seongju Hangae Village. In case of Oeam Village, there are three gardens where Musa basjoo was planted including Seolimbang, Vice Minister's Residence, and Geonjae House where Musa basjoo withered now. In case of Hangae Village, it was found in Bukbi House, Hahoe Residence and Gyoridaek Jinsa's Residence and most of them were planted in front of guesthouses and main building with the assemble-planting method. Musa basjoo planting was confirmed in 39 traditional temples and it was found that Yangsan Tongdosa Temple and attached hermitage Geukrakam are currently prevalent in Musa basjoo planting. Musa basjoo was planted on either side of the stairs of Buddhist sanctums for Buddha and Avalokitesvara Guan Yin of main temples and gwaneum temples with the assemble-planting method and it has a tendency of pair planting. Considering that Musa basjoo is a southern plant, most of Musa basjoo planting was distributed around Jeollanam-do and Gyeongsangnam-do, which is closely related to the isotherm distribution of the Korean Peninsula. Especially, it was found that planting flora was centered on $12^{\circ}C$ of Warmth Index $100^{\circ}$ and annual average temperature.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.2
• /
• pp.119-125
• /
• 2006

Purpose: To measure the dose for dose optimization at the reference point (A, B) and the critical organ with multi Purpose brachytherapy phantom (MPBP). For this wort the MPBP was custom made, and designed to reconstruct the treatment applicator using multi function applicator (MFA) in the same way as the treatment of patient. Materials and Methods: Dose measurements were made at the reference points (A, B) and the bladder with thermoluminescence dosimeter (TLD) for four patients with tandem and ovoid of uterine cervix cancer using the phantom. In Phantom, Total 20 times of the measurements were made with 5 times a patient. Results: The results of TLD measurements in MPBP phantom showed the relative error ranging from -3.2% to 3.8% at A point, and -1.4% to 4% at B point and 1.3% to 7.15% at the bladder of reference point. Conclusion: The reproducibility of dose measurement under the same condition as the treatment could be achieved using the custom-made MFA in phantom and the dose at the reference point (A, B) and bladder could be analyzed accurately. The measured dose acquired in MPBP can apply for the dose optimization.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.157-166
• /
• 2018

Purpose: This study was aimed to compare the consistency between the custom abutment design and the output in two CAD software programs. Materials and Methods: Customized abutments were designed by using 3Shape Dental System CAD software and Delta9 CAD software on a plaster model with implants (CRM STL file). After milling of the designed abutments, the abutments were scanned with a contact method scanner (Test STL file). We overlaid the Test STL file with each CRM STL file by using inspection software, and then compared the milling reproducibility by measuring the output error of the specimens from each CAD software program. Results: The Delta9 showed better milling reproducibility than 3Shape when comparing the milling errors obtained with a full scan of all specimens (P < .05) and also when comparing the axial wall region specifically according to the axial angle. With 0.9 mm marginal radius, the Delta9 showed better consistency between the design and the output than 3Shape (P < .05). While, anti-rotation form had no significant difference in error between the two systems. When cumulative errors were compared, the Delta9 showed better milling reproducibility in almost cases (P < .05). Conclusion: Delta9 showed a significantly smaller error for most of the abutment design options. This means that it is possible to facilitate generation of printouts with reliable reproducibility and high precision with respect to the planned design.

• Journal of Veterinary Clinics
• /
• v.31 no.1
• /
• pp.46-50
• /
• 2014

A 7-year-old spayed female Welsh corgi presented with a mass of the skull. The mass was diagnosed as multilobular bone tumor and surgically removed. To treat a large bone defect after the tumor removal, custom-made artificial bone fabricated by a 3-dimensional ink-jet printer was implanted in the defect. Follow-up computed tomography evaluation was performed for 4.3 years. The implant was well integrated with the skull and had covered the large bone defect during the follow-up period. Gradual degradation of the implant began 6 weeks after surgery. It provides an additional option for the treatment of large bone defect.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.433-445
• /
• 2010

The aim of this study was to evaluate the fixation effect by connecting impression copings and to compare the three types of impression trays which were used in open tray impression technique. Experimental groups used 3 types of impression trays which are custom tray, plastic metal combination tray and polycarbonate stock tray. These three groups were subdivided into splinted and non-splinted impression copings group. The total number of experimental groups was six. 10 specimens were made for each group. We used 1-screw test, observing the specimen on which only one side abutment of reference framework was fixated with 20 Ncm. The gap between implant analogue and abutment of the other side was observed by stereo microscope. It was measured at 6 points in each specimen. Measuring value was selected when same result was revealed 3 times. Recorded data were statistically analyzed. Whether impression copings were splinted or not, there was no significant difference among custom tray group, plastic metal combination tray group, and polycarbonate stock tray group. Significant statistical difference in vertical fit discrepancy was found between splinted and non-splinted impression copings group with custom tray, plastic metal combination tray and polycarbonate stock tray (p<0.05).