• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권5호
• /
• pp.2067-2080
• /
• 2016

Cooperative spectrum sensing (CSS) for vacant licensed bands is one of the key techniques in cognitive radio networks. Currently, sequential probability ratio test scheme (SPRT) is considered as a powerful soft decision approach to improve the sensing result for CSS. However, SPRT assumes all secondary users (SU) are honest, and thus offering opportunities for malicious SUs to launch the spectrum sensing data falsification attack (SSDF attack). To combat such misbehaved behaviors, recent efforts have been made to trust mechanism. In this paper, we argue that powering SPRT with traditional trust mechanism is not enough. Dynamic SSDF attackers can maintain high trust in an alternant process of submitting honest or false sensing data, resulting in difficultly detecting them. Noting that the trust value of dymamic SSDF attackers behave highly volatile, a novel trusted SPRT scheme (VSPRT) based on volatility decay analysis is proposed in this paper to mitigate the harmful effect of dynamic SSDF attackers in the process of the soft-decision data fusion, and thus improving the accuracy of the final sensing result. Simulation results show that the VSPRT scheme outperforms the conventional SPRT schemes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1157-1164
• /
• 2003

Dynamic Load/unload (L/UL) mechanism is an alternative to the contact start stop (CSS) technology which eliminates stiction and wear failure modes associated with CSS. Other benefits of L/UL include increased areal density due to smooth disk surfaces, thinner overcoats, and lower head flying height Improved shock resistance due to elimination of head slap, and reduced power consumption. Inertia latch mechanism becomes important for mobile disk drives because of non operating shock performance. Various types of latch designs have been introduced in hard disk drives to limit a rotary actuator from sudden uncontrolled motion. In this paper, a single spring inertia latch is introduced for a small form optical disk drive, which uses a rotary actuator for moving an optical pick-up. A new small inertia latch with single spring is designed to ensure both feasible and small size. The shock performance of the new inertia latch is experimentally verified.

• Corrosion Science and Technology
• /
• 제23권2호
• /
• pp.166-178
• /
• 2024

The localized corrosion resistance of UNS N07718 alloy was investigated after solution heat treatment. When the alloy was heat-treated at 1050 ℃ for 2.5 hours, it experienced an increase in average grain diameter, a reduction in grain boundary area, and the dissolution of delta phases along grain boundaries. Additionally, primary metallic nitrides (MN) and metallic carbides (MC), enriched with either Ti or Nb, were identified and exhibited a random distribution within the microstructures. Despite the solution heat treatment, the composition, diameter, and abundance of MNs and MCs remained relatively consistent. The critical pitting temperature (CPT), as determined by the ASTM G48-C immersion test, revealed similar values of 45 ℃ for both treated and untreated alloys. However, a decrease in maximum pit depth and corrosion rate was observed after the solution heat treatment. The microstructural changes that occurred during the heat treatment and their potential implications were discussed to understand the influence of the solution heat treatment.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.243-247
• /
• 2001

As a means to reduce stiction in the landing zone padded sliders can be used. In this work the performance of padded slider was investigated using a commercial spin stand. The friction and acoustic emission signals were measured during the experiment. It is shown that padded slider show superior friction and AE characteristics. However, the wear properties of the pads should be further Improved.

• 생약학회지
• /
• 제50권4호
• /
• pp.253-259
• /
• 2019

Chaenomeles speciose Nakai (CSP) or Chaenomeles sinensis Koehne (CSS) (Rosaceae) has been used, traditionally, to treat muscle problems and gastric dampness in eastern Asia countries. Therefore, many studies have focused on investigating its active compounds and effects on muscle pain, arthritis and gastro-intestinal diseases. Recently, several studies reported that CSS extract degrade amyloid plaques and enhance synaptic acetylcholine level in vivo and in vitro. Although these two Chaenomeles species are used without differences, CSP is reported to contains more phenolic compounds which are known to enhance memory. Therefore, in this study, we investigated the memory ameliorating effects of CSP by employing the passive avoidance test, Y-maze task and novel object recognition test. CSP (30 or 100 mg/kg) ameliorated the declined memory induced by scopolamine injection and enhanced the brain-derived neurotrophic factor (BDNF) levels along with post synaptic density protein 95 (PSD 95) levels at the hippocampus of the scopolamine-injected mouse brain. These results suggested that CSP alleviates the cognition declines caused by cholinergic blockade via enhancing BDNF levels and PSD 95, and that it would enhance memory formation and be useful for treating memory declines.

• Tribology and Lubricants
• /
• 제17권4호
• /
• pp.312-320
• /
• 2001

In magnetic hard disk drives, higher areal recording density requires reduction of head-disk spacing. To overcome the increase of stiction associated with reduction of head-disk spacing, a padder slider, which adds pads to slider's air bearing surface, can be one of the practical solution for sub 20 nm flying height, and even for near contact recording. This study investigated the tribological characteristics of a padder slider. A padder slider took off slowly but showed less friction force than a normal slider. The hot/dry CSS test and drag test indicated that pad wear of a padder slider was negligible. The tribological performance of disk is an important factor to be considered. In particular, less carbon overcoat layer of the disk will result in higher stiction and wear in slider/disk interface. In conclusion, a padder slider shows encouraging tribological performances for practical use in HDD.

• 열처리공학회지
• /
• 제28권5호
• /
• pp.239-249
• /
• 2015

Various amount of NbC carbide was intentionally formed in a matrix-type cold-work tool steel by controlled amount of Nb and C addition. And the effect of NbC addition on the mechanical properties was investigated. Four alloys with different Nb and C contents were cast by vacuum induction melting, then hot forging and spheroidizing annealing were conducted. The machinability of the annealed specimens was examined with 3 different cutting tools. And tensile tests at room temperature were conducted. After quenching and tempering, hardness and impact toughness were measured, while wear resistance was evaluated by disk-on-plate type wear test. The increasing amount of NbC addition resulted in degraded machinability with increased strength, whereas the absence of NbC also led to poor machinability due to high toughness. After quenching and tempering, the additional NbC improved wear resistance with increasing hardness, whereas it deteriorated impact toughness. Therefore, it could be found that a moderate addition of NbC was desirable for the balanced combination of mechanical properties.

• 한국재료학회지
• /
• 제12권12호
• /
• pp.918-923
• /
• 2002

In this work, CdTe films were deposited on CdS/ITO/glass substrate by a close spaced sublimation (CSS) method. A $Cu_2$Te layer was deposited on the CdTe film by evaporating $Cu_2$Te powder. Then the samples were annealed for p+ ohmic contact. TEM and XRD analysis showed that $CdTe/Cu_2$Te interface exhibited different forms with various annealing temperature. A good p+ ohmic contact was achieved when the annealing temperature was between $180^{\circ}C$ to $200^{\circ}C$. Best cell efficiency of 12.34% was obtained when post annealing temperature was $200^{\circ}C$ for 5 min. Thermal stress test of the CdS/CdTe cells with carbon back contact showed that the $Cu_2$Te contact was stable at $50^{\circ}C$ in $N_2$ and was slowly degraded at $100^{\circ}C$ in $N_2$. In comparison to the conventional carbon contact, the $Cu_2$Te contact showed a better thermal stability.

• 한국지리정보학회지
• /
• 제18권3호
• /
• pp.52-62
• /
• 2015

최근 웹 제작 추세로 모바일 우선 방식이 강조되면서 모바일 단말의 유형이나 화면 크기, 해상도가 다양해짐에 따라 이에 대응하여 웹 사이트 제작 시 효율적인 제작 방법을 제공하는 반응형 웹에 대한 실제적인 필요성이 증가하고 있다. 그러나 공간정보 웹 매핑 분야에서 반응형 웹의 적용은 초기 단계이다. 이번 연구에서는 반응형 웹을 이용하여 실제 공간정보 오픈 플랫폼과 연계한 가변 레이아웃에 대한 실제 시험 구현을 수행하고 그 결과를 예시하였다. 또한 공간정보 웹 서비스 구축에서 반응형 웹 방법을 적용하기 위한 제한 사항과 고려 사항을 제시하고자 하였다. 시험 구현 과정에서는 HTML5, JavaScript, CSS3 등과 같은 개발 환경을 OpenLayers와 연계하는 웹매핑 서비스를 대상으로 하였다. 앞으로 공간정보나 위치정보 등으로부터 파생되는 콘텐츠의 모바일 서비스 개발에서도 반응형 웹을 이용한 연계, 적용 사례가 증가할 것으로 기대한다.

• 생명과학회지
• /
• 제25권5호
• /
• pp.557-567
• /
• 2015

고부가가치 돌산갓 김치를 개발하고자 다시마를 주원료로 한 혼합조미농축액(CSS)과 표고버섯을 주원료로 한 혼합조미농축액 (CSL)을 첨가하여 각각 GK-A, GK-B 2종의 갓김치를 제조하였다. $4^{\circ}C$, 80일간 발효실험을 한 결과 GK-A군이 무기질, 식이섬유 함량이 높고 pH저하 및 산도 상승 지연 효과를 나타내었다. 염도는 70일째 이후 유의적 차이는 없었고, 환원당 함량은 대조군 보다 조미농축액 첨가군이 높게 나타났다. 유산균 Leuconostoc sp. 균수는 실험군이 대조군에 비하여 많았고, 적숙기를 지나면서 증가하는 Lactobacillus sp.는 대조군이 발효 20일째부터 증가하였다. 명도는 담근 초기에서 30일까지는 대조군이 높고, 황색도는 GK-B군이 20일부터 높아져 갈변 가능성이 높았다. 경도는 GK-A군이 담금 초기와 10일째 높은 수치를 나타내었다. 유리아미노산 GK-A군이 aspartic acid과 glutamic acid 함량이 전 기간에서 유의적으로 높았다(p<0.05). 단맛계 아미노산의 함량은 GK-A군이 발효 0일, 10일, 30일째 함량에서 다른 군에 비해 유의적으로 높은 수준을 나타내었다(p<0.05). 관능검사 결과는 GK-A가 가장 기호도가 우수하였다. 이상의 결과를 종합적으로 검토한 결과, 다시마를 주원료로 하여 만든 혼합조미농축액 CSS를 90 g 첨가하여 담근 GK-A군이 소비자에게 맛과 영양을 제공할 수 있는 새로운 돌산갓김치 상품으로 가능성이 있을 것으로 기대된다.