• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2067-2080
• /
• 2016

Cooperative spectrum sensing (CSS) for vacant licensed bands is one of the key techniques in cognitive radio networks. Currently, sequential probability ratio test scheme (SPRT) is considered as a powerful soft decision approach to improve the sensing result for CSS. However, SPRT assumes all secondary users (SU) are honest, and thus offering opportunities for malicious SUs to launch the spectrum sensing data falsification attack (SSDF attack). To combat such misbehaved behaviors, recent efforts have been made to trust mechanism. In this paper, we argue that powering SPRT with traditional trust mechanism is not enough. Dynamic SSDF attackers can maintain high trust in an alternant process of submitting honest or false sensing data, resulting in difficultly detecting them. Noting that the trust value of dymamic SSDF attackers behave highly volatile, a novel trusted SPRT scheme (VSPRT) based on volatility decay analysis is proposed in this paper to mitigate the harmful effect of dynamic SSDF attackers in the process of the soft-decision data fusion, and thus improving the accuracy of the final sensing result. Simulation results show that the VSPRT scheme outperforms the conventional SPRT schemes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1157-1164
• /
• 2003

Dynamic Load/unload (L/UL) mechanism is an alternative to the contact start stop (CSS) technology which eliminates stiction and wear failure modes associated with CSS. Other benefits of L/UL include increased areal density due to smooth disk surfaces, thinner overcoats, and lower head flying height Improved shock resistance due to elimination of head slap, and reduced power consumption. Inertia latch mechanism becomes important for mobile disk drives because of non operating shock performance. Various types of latch designs have been introduced in hard disk drives to limit a rotary actuator from sudden uncontrolled motion. In this paper, a single spring inertia latch is introduced for a small form optical disk drive, which uses a rotary actuator for moving an optical pick-up. A new small inertia latch with single spring is designed to ensure both feasible and small size. The shock performance of the new inertia latch is experimentally verified.

• Corrosion Science and Technology
• /
• v.23 no.2
• /
• pp.166-178
• /
• 2024

The localized corrosion resistance of UNS N07718 alloy was investigated after solution heat treatment. When the alloy was heat-treated at 1050 ℃ for 2.5 hours, it experienced an increase in average grain diameter, a reduction in grain boundary area, and the dissolution of delta phases along grain boundaries. Additionally, primary metallic nitrides (MN) and metallic carbides (MC), enriched with either Ti or Nb, were identified and exhibited a random distribution within the microstructures. Despite the solution heat treatment, the composition, diameter, and abundance of MNs and MCs remained relatively consistent. The critical pitting temperature (CPT), as determined by the ASTM G48-C immersion test, revealed similar values of 45 ℃ for both treated and untreated alloys. However, a decrease in maximum pit depth and corrosion rate was observed after the solution heat treatment. The microstructural changes that occurred during the heat treatment and their potential implications were discussed to understand the influence of the solution heat treatment.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.243-247
• /
• 2001

As a means to reduce stiction in the landing zone padded sliders can be used. In this work the performance of padded slider was investigated using a commercial spin stand. The friction and acoustic emission signals were measured during the experiment. It is shown that padded slider show superior friction and AE characteristics. However, the wear properties of the pads should be further Improved.

• Korean Journal of Pharmacognosy
• /
• v.50 no.4
• /
• pp.253-259
• /
• 2019

Chaenomeles speciose Nakai (CSP) or Chaenomeles sinensis Koehne (CSS) (Rosaceae) has been used, traditionally, to treat muscle problems and gastric dampness in eastern Asia countries. Therefore, many studies have focused on investigating its active compounds and effects on muscle pain, arthritis and gastro-intestinal diseases. Recently, several studies reported that CSS extract degrade amyloid plaques and enhance synaptic acetylcholine level in vivo and in vitro. Although these two Chaenomeles species are used without differences, CSP is reported to contains more phenolic compounds which are known to enhance memory. Therefore, in this study, we investigated the memory ameliorating effects of CSP by employing the passive avoidance test, Y-maze task and novel object recognition test. CSP (30 or 100 mg/kg) ameliorated the declined memory induced by scopolamine injection and enhanced the brain-derived neurotrophic factor (BDNF) levels along with post synaptic density protein 95 (PSD 95) levels at the hippocampus of the scopolamine-injected mouse brain. These results suggested that CSP alleviates the cognition declines caused by cholinergic blockade via enhancing BDNF levels and PSD 95, and that it would enhance memory formation and be useful for treating memory declines.

• Tribology and Lubricants
• /
• v.17 no.4
• /
• pp.312-320
• /
• 2001

In magnetic hard disk drives, higher areal recording density requires reduction of head-disk spacing. To overcome the increase of stiction associated with reduction of head-disk spacing, a padder slider, which adds pads to slider's air bearing surface, can be one of the practical solution for sub 20 nm flying height, and even for near contact recording. This study investigated the tribological characteristics of a padder slider. A padder slider took off slowly but showed less friction force than a normal slider. The hot/dry CSS test and drag test indicated that pad wear of a padder slider was negligible. The tribological performance of disk is an important factor to be considered. In particular, less carbon overcoat layer of the disk will result in higher stiction and wear in slider/disk interface. In conclusion, a padder slider shows encouraging tribological performances for practical use in HDD.

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.5
• /
• pp.239-249
• /
• 2015

Various amount of NbC carbide was intentionally formed in a matrix-type cold-work tool steel by controlled amount of Nb and C addition. And the effect of NbC addition on the mechanical properties was investigated. Four alloys with different Nb and C contents were cast by vacuum induction melting, then hot forging and spheroidizing annealing were conducted. The machinability of the annealed specimens was examined with 3 different cutting tools. And tensile tests at room temperature were conducted. After quenching and tempering, hardness and impact toughness were measured, while wear resistance was evaluated by disk-on-plate type wear test. The increasing amount of NbC addition resulted in degraded machinability with increased strength, whereas the absence of NbC also led to poor machinability due to high toughness. After quenching and tempering, the additional NbC improved wear resistance with increasing hardness, whereas it deteriorated impact toughness. Therefore, it could be found that a moderate addition of NbC was desirable for the balanced combination of mechanical properties.

• Korean Journal of Materials Research
• /
• v.12 no.12
• /
• pp.918-923
• /
• 2002

In this work, CdTe films were deposited on CdS/ITO/glass substrate by a close spaced sublimation (CSS) method. A $Cu_2$Te layer was deposited on the CdTe film by evaporating $Cu_2$Te powder. Then the samples were annealed for p+ ohmic contact. TEM and XRD analysis showed that $CdTe/Cu_2$Te interface exhibited different forms with various annealing temperature. A good p+ ohmic contact was achieved when the annealing temperature was between $180^{\circ}C$ to $200^{\circ}C$. Best cell efficiency of 12.34% was obtained when post annealing temperature was $200^{\circ}C$ for 5 min. Thermal stress test of the CdS/CdTe cells with carbon back contact showed that the $Cu_2$Te contact was stable at $50^{\circ}C$ in $N_2$ and was slowly degraded at $100^{\circ}C$ in $N_2$. In comparison to the conventional carbon contact, the $Cu_2$Te contact showed a better thermal stability.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.3
• /
• pp.52-62
• /
• 2015

As a recent dominant web trend, mobile first strategy has been emphasized, and interests with respect to responsive web that provides effective methodology to various mobile devices and their display resolution are also increasing. However, it is an early adoption stage in web mapping for geo-spatial applications. This study is to present some practical examples of layouts using responsive web technologies linked to geo-spatial open platform. Suggestive consideration points for further application of responsive web to geo-spatial services are presented. On test implementing, HTML5, JavaScript, and CSS3 were used, and web mapping processing using OpenLayers was performed. It is expected that responsive web applications for contents derived from geo-spatial information or location data increase.

• Journal of Life Science
• /
• v.25 no.5
• /
• pp.557-567
• /
• 2015

To increase the marketability of Dolsan leaf mustard Kimchi, seasonings were prepared by sea tangle and Lentinus edodes. Gat Kimchi A (GK-A) and Gat Kimchi B (GK-B) were prepared by addition of complex seasoning with Sea tangle (CSS), complex seasoning with Lentinus edodes (CSL), respectively and evaluated the quality characteristics. GK-A contained high minerals and dietary fiber and showed the effect of delaying pH-lowering and acidity-rising. There were no significant differences in salinity test after 70 days. Reducing sugar of test groups was higher than control. During the fermentation, Leuconostoc sp. was grown in GK-A and GK-B than control. Growth of control's Lactobacillus sp. increased 20 days after. Up to 30 days, lightness of control was high. Yellowness were increased browning potential in GK-B, 20 days after. From the initial to 10 days, Hardness of GK-A showed higher than the others. glutamic acid and aspartic acid content of GK-A was higher significantly than the others in the entire fermentation period (p<0.05). At 0, 10, 30 days, sweet-tasty amino acids of GK-A showed a significantly higher level than the others (p<0.05). From 10 days to 40 days of fermentation, the sensory evaluation of GK-A is better than the other groups. Comprehensively reviewed the above results, the conclusion is as follows: CSS made with sea tangle as a main ingredient. GK-A by seasoning the CSS to 90 g GK-A is expected as a new Dolsan leaf mustard products that can provide flavor and nutrition to the consumer at the same time.