• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.42-46
• /
• 2013

In 2010, Airworthiness standard for VLA(Very Light Airplane) category was newly introduced as KAS Part VLA. KAS Part VLA is an adaption of EASA CS-VLA which was developed to reduce unnecessary burden of manufacturer of very light, simple, single-reciprocating-engine/propeller powered airplanes having low stall speeds by tailoring some requirements of Part 23. In this paper, difference and similarity of structural requirements between Part 23 and VLA was analyzed.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3197-3198
• /
• 2013

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.479-484
• /
• 2013

PURPOSE. The aim of this study was to evaluate the effects of additional acid etching and curing mechanism (light-curing or self-curing) of a composite resin on the dentin bond strength and compatibility of one-step self-etching adhesives. MATERIALS AND METHODS. Sixteen human permanent molars were randomly divided into eight groups according to the adhesives used (All-Bond Universal: ABU, Clearfil S3 Bond: CS3), additional acid etching (additional acid etching performed: EO, no additional acid etching performed: EX), and composite resins (Filtek Z-250: Z250, Clearfil FII New Bond: CFNB). Group 1: ABU-EO-Z250, Group 2: ABU-EO-CFNB, Group 3: ABU-EX-Z250, Group 4: ABU-EX-CFNB, Group 5: CS3-EO-Z250, Group 6: CS3-EO-CFNB, Group 7: CS3-EX-Z250, Group 8: CS3-EX-CFNB. After bonding procedures, composite resins were built up on dentin surfaces. After 24-hour water storage, the teeth were sectioned to make 10 specimens for each group. The microtensile bond strength test was performed using a microtensile testing machine. The failure mode of the fractured specimens was examined by means of an optical microscope at ${\times}20$ magnification. The data was analyzed using a one-way ANOVA and Scheffe's post-hoc test (${\alpha}$=.05). RESULTS. Additional etching groups showed significantly higher values than the no additional etching group when using All-Bond Universal. The light-cured composite resin groups showed significantly higher values than the self-cured composite resin groups in the Clearfil S3 Bond. CONCLUSION. The additional acid etching is beneficial for the dentin bond strength when using low acidic one-step self-etch adhesives, and low acidic one-step self-etch adhesives are compatible with self-cured composite resin. The acidity of the one-step self-etch adhesives is an influencing factor in terms of the dentin bonding strength and incompatibility with a self-cured composite resin.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.80-85
• /
• 2013

Anionic polymerization of hexafluoropropylene oxide (HFPO) was investigated under various reaction conditions such as various hexafluoropropylene (HFP) oligomers composed of dimer and trimer, reaction temperatures, and feeding rates of hexafluoropropylene oxide monomer. HFP oligomer was synthesized from cesium fluoride (CsF) and HFP in tetraethyleneglycol dimethylether (TG). Under 5 g of CsF, 200 g of HFP, 10 g of TG, and reaction temperature $30^{\circ}C$, HFP dimer content in oligomer was relatively increased. HFPO oligomer with a high molecular weight ($M_w$ 3600) was synthesized in conditions of reaction temperature $0^{\circ}C$, HFP oligomer with 35.1% of dimer, and 1.85 g/min of HFPO feeding rate. Otherwise, chain transfer was increased under unoptimized reaction conditions. Consequently, it was found that reaction conditions impact chain propagation and chain transfer in the anionic polymerization of HFPO.

• Journal of Chest Surgery
• /
• v.46 no.5
• /
• pp.328-339
• /
• 2013

Background: Ischemic injury and the rejection process are the main reasons for graft failure in tracheal transplantation models. To enhance the acceptance, we investigated the influence of mesenchymal stem cells (MSCs) on tracheal allografts. Methods: Extracted tracheal grafts from New Zealand white rabbits were cryopreserved for 4 weeks and orthotopically transplanted (control group A, n=8). In group B (n=8), cyclosporin A (CsA, 10 mg/kg) was injected daily into the peritoneal cavity. In group C (n=8), MSCs ($1.0{\times}10^7$ cells/kg) from the same donor of the tracheal allograft, which had been pre-cultured for 4 weeks, were infused intravenously after transplantation. In group D (n=8), MSCs were infused and CsA was injected daily. Four weeks after transplantation, gross and histomorphological assessments were conducted for graft necrosis, measuring the cross-sectional area of the allograft, determining the degree of epithelization, lymphocytic infiltration, and vascular regeneration. Results: The morphologic integrity of the trachea was retained completely in all cases. The cross-sectional areas were decreased significantly in group A (p=0.018) and B (p=0.045). The degree of epithelization was enhanced (p=0.012) and the lymphocytic infiltration was decreased (p=0.048) significantly in group D compared to group A. The degree of vascular regeneration did not differ significantly in any of the groups. There were no significant correlations among epithelization, lymphocytic infiltration, and vascular regeneration. Conclusion: The administration of MSCs with concurrent injections of CsA enhanced and promoted epithelization and prevented lymphocytic infiltration in tracheal allografts, allowing for better acceptance of the allograft.

• Journal of the Korean Society of Costume
• /
• v.63 no.3
• /
• pp.33-45
• /
• 2013

This work developed the basic motive design utilizing the physical beauty of the traditional ornaments used uniquely by Korean females and suggested some textile designs and fashion cultural product designs. As a research method, computer design programs Adobe Illustrator CS3 and Adobe Photoshop CS3 were used as well as literature examination. The motive was mainly based on the dwiggoji and ddeoljam, which are female ornaments. The formative shape in woman ornaments was classified into four kinds: plant, animal, geometry, and hybrid. The hybrid type was divided further into such combinations as plant, animal, and geometry, which came up with 8 fundamental motives for design development in total. With regard to the basic motive design, the coordinated concept was adopted with a combination of traditional taste and contemporary taste in harmony for the expression of delicate image on the condition that the basic format in female ornament is maintained. Textile design was processed with symmetry, rotation, repeat, and overlap as fundamental motive. As to the design for fashion cultural products, design mapping was proposed for neckties, handbags, clutches, shirts, and one-pieces. Utility and beauty in the traditional ornaments unique to Korean women could be recognized once again through this work. This work also assured the possibility for the endless improvement as a design development motive with originality.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.7
• /
• pp.503-506
• /
• 2013

In this paper, we propose the face recognition method combining the ECSP preprocessing technique which is modified version of previous CS-LBP and the illumination-robust D2D-PCA feature. The performance evaluation of proposed method was carried out using various binary pattern operators and feature extraction algorithms such as well-known PCA and 2D-PCA on the Yale B database. As a results, the proposed method showed the best recognition accuracy compared to different approaches, and we confirmed that the proposed approach is robust to illumination variation.

• Smart Structures and Systems
• /
• v.11 no.3
• /
• pp.241-259
• /
• 2013

This paper presents the optimum load-speed diagram evaluation for a linear micromotor, including multitude cantilever piezoelectric bimorphs, briefly. Each microbeam in the mechanism can be actuated in both axial and flexural modes simultaneously. For this design, we consider quasi-static and linear conditions, and a relatively new numerical method called the smoothed finite element method (S-FEM) is introduced here. For this purpose, after finding an optimum volume fraction for piezoelectric layers through a standard numerical method such as quadratic finite element method, the relevant load-speed curves of the optimized micromotor are examined and compared by deterministic topology optimization (DTO) design. In this regard, to avoid the overly stiff behavior in FEM modeling, a numerical method known as the cell-based smoothed finite element method (CS-FEM, as a branch of S-FEM) is applied for our DTO problem. The topology optimization procedure to find the optimal design is implemented using a solid isotropic material with a penalization (SIMP) approximation and a method of moving asymptotes (MMA) optimizer. Because of the higher efficiency and accuracy of S-FEMs with respect to standard FEMs, the main micromotor characteristics of our final DTO design using a softer CS-FEM are substantially improved.

• Journal of the Korean Chemical Society
• /
• v.57 no.4
• /
• pp.439-446
• /
• 2013

Chitosan (CS) and hydroxypropylmethyl cellulose (HPMC) blend microspheres were prepared by water-in-oil emulsion technique and were loaded with an anti-cancer drug 5-fluorouracil (5-FU). CS-HPMC microspheres were characterized by Fourier transform infrared spectroscopy to confirm the cross-linking reaction. Scanning electron microscopy (SEM) was also used to assess the surface morphology of particles prepared. The quantity of release of 5-FU from the microspheres have been studied in terms of blend composition and amount of cross-linking agent. Differential scanning calorimetry and X-ray diffraction techniques indicated a uniform distribution of 5-FU particles in microspheres, whereas SEM suggested the spherical structure of the microspheres with slight rough surface. The in vitro drug release indicated that the particle size and release kinetics depend upon blend composition, amount of cross-linking agent used and amount of 5-FU present in the microspheres.

• Fashion & Textile Research Journal
• /
• v.15 no.3
• /
• pp.325-335
• /
• 2013

This work develops a motif design integrated with geometrical patterns in traditional ddeoksal and that can be applied to a scarf design so that traditional elements unique to Korean culture can be developed further for a modern application to various design fields. For the research method, literature reviews on op art and traditional ddeoksal were conducted with Adobe Illustrator CS3 and Adobe Photoshop CS3. As for the motif combination, such applications were taken as five pieces from the works of Victor Vasarely and some traditional ddeoksal shapes such as oblique line pattern, taegeuk pattern, and geometrical pattern. Abstract and geometrical images were borrowed from op art and ddeoksal for image expression. The total number of works selected was eleven. To realize the applied scarf design, a motif layout was performed with the scarf center or rim highlighted so that each design feature could be remarkable based on the motif combination. With the function of scaling, rotation, opacity control, filtering effect, the changed images were shown through motif distortion. In addition, this work applies a single combined motif to products for a possible transformation into handkerchiefs and boutique scarfs in the case of smaller sized scarfs.