• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제11권3호
• /
• pp.206-211
• /
• 2001

This article describes identification and quantification of benzene in the casting process. Air samples around the casting process were taken by using personal air sampler attached charcoal tube and desorbed by carbon disulfide. The identification and quantitative analysis of benzene have been performed by GC-MS and GC-FID. Calibration range of standard solutions for benzene was prepared in range from 0.1 to 2 times of TLVs concentrations($1.4{\sim}28{\mu}g/1m{\ell}$ CS2) and the limit of detection was $0.11{\pm}0.002{\mu}g/1m{\ell}$ CS2. Benzene detected in airborne was ranged in 4.0ppb~104.7ppb.

• The Journal of Advanced Prosthodontics
• /
• 제15권4호
• /
• pp.179-188
• /
• 2023

PURPOSE. This in vitro study aimed to evaluate the performance of digital intraoral scanners in a completely edentulous patient with angled and parallel implants. MATERIALS AND METHODS. A total of 6 implants were placed at angulations of 0°, 5°, 0°, 0°, 15°, and 0° in regions #36, #34, #32, #42, #44, and #46, respectively, in a completely edentulous mandibular polyurethane model. Then, the study model created by connecting a scan body on the implants was scanned using a model scanner, and a 3D reference model was obtained. Three different intraoral scanners were used for digital impressions (PS group, TR group, and CS group, n = 10 in each group). The distances and angles between the scan bodies in these measurement groups were measured. RESULTS. While the Primescan (PS) impression group had the highest accuracy with 38 ㎛, the values of 104 ㎛ and 171 ㎛ were obtained with Trios 4 IOSs (TR) and Carestream 3600 (CS), respectively (P = .001). The CS scanner constituted the impression group with the highest deviation in terms of accuracy. In terms of dimensional differences in the angle parameter, a statistically significant difference was revealed among the mean deviation angle values according to the scanners (P < .001). While the lowest angular deviation was obtained with the PS impression group with 0.185°, the values of 0.499° and 1.250° were obtained with TR and CS, respectively. No statistically significant difference was detected among the impression groups in terms of precision values (P > .05). CONCLUSION. A statistically significant difference was found among the three digital impression groups upon comparing the impression accuracy. Implant angulation affected the impression accuracy of the digital impression groups. The most accurate impressions in terms of both distance and angle deviation were obtained with the PS impression group.

• Journal of Animal Environmental Science
• /
• 제15권2호
• /
• pp.161-170
• /
• 2009

This experiment was conducted to investigate the effects of compost leachate and concentrated pig slurry on growth of pepper in substrate hyrdoponic culture. In process of composting, compost leachate was was through a saturated compost heap. Pig slurry was filtered by ultra filtration and concentrated by reverse osmosis process. The pig slurry was mixed with chemical nutrient solution and byproduct based on nitrogen content. Peppers were grown in the seven different hydroponic solutions; compost leachate (CL), concentrated pig slurry (CS), compost leachate + byproduct (CL+BP), concentrated pig slurry + byproduct (CS+BP), compost leachate 50% + nutrient solution 50% (CL+NS), concentrated pig slurry 50% + nutrient solution 50% (CS+NS) and chemical nutrient solution for pepper. The chemical nutrient solution was the standard solution of National Horticulture Research Station for the growth of pepper. The concentration of nutrient solution was adjusted $1.6{\sim}2.0mS/cm$ in EC. The compost leachate and concentrated pig slurry were low in phosphorus (P), calcium (Ca), magnesium (Mg), but rich in potassium (K). Growth characteristics as affected by the different nutrient solution were significantly different. Growth and fruit characteristics treated with CL 50+NS 50%CS and 50+NS 50% were similar with NS 100% control plot. The dry weight of stem and leaf were 107.4, 104.2g in plot of NS 100% and CS 50%+NS 50%, respectively. The fruit of pepper showed lowest in the plot treated with 100% concentrated pig slurry, and the growth of pepper severely decreased after application of 100% CS treatment. The yield of pepper was not significantly different between the plots treated with mixture of CS50 + NS50% and 100% nutrient solution treatment. Fruit yield of the compost leachate concentrated pig slurry plot were 59, 14% compared to control, repectively. In conclusion, the mixture solution of 50% of pig slurry and 50% of nutrient solution could be used as a nutrition solution of pepper in hydroponic culture.

• Journal of Animal Environmental Science
• /
• 제14권2호
• /
• pp.119-128
• /
• 2008

This experiment was conducted to investigate the effects of concentrated pig slurry using membrane filter on growth of tomato in nutriculture. Pig slurry was filtered by ultra filtration and concentrated by reverse osmosis process. Filtration of pig slurry was necessary to prevent the hose clogging in nutriculture. The concentrated pig slurry (CS) and nutrient solution (NS) were mixed by six different mixing ratios of 0:100, 20:80, 40:60, 60:40%, 80: 20 and 100%:0% based on nitrogen content. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of tomato. The concentration of nutrient solution was adjusted a range of $1.6{\sim}2.0mS/cm$ in EC. The plant height of tomato treated with CS 20+NS 80% was similar with NS 100% control plot. Plant height was highest in the plot of CS 20+NS 80%. The treatment of 100% concentrated pig slurry was lowest in the gowth characteristics of tomato. Number of cluster was very lower in 100% concentrated pig slurry compared with plot of chemical nutrient solution. In the beginning of growth stage, SPAD reading value was reduced in plot treated with CS 100%, but CS 20+NS 80% plot was higher compared to 100% concentrated pig slurry. SPAD value of tomato leaves was decreased as the amount of CS was increased. The SPAD value also in treatment of concentrated pig slurry was lower in the middle growth stage compared to control plot. The dry weight of stem and leaf were 107.4, 104.2g in plot of NS 100% and CS 20%+NS 80%, respectively. The fruit number and weight were decreased at high application plots of concentrated pig slurry, The fruit setting of tomato showed lowest in the plot treated with 100% concentrated pig slurry, and the growth of tomato severely decreased after application of 100% CS treatment. In conclusion, the growth characteristics such as plant height and fruit weight of tomato were not significantly different between the plots treated with mixture of 20% CS +80%NS and 100% nutrient solution treatment. In conclusion, the mixture solution of 20% of concentrated pig slurry and 80% of nutrient solution could be used as a nutrition solution of tomato nuticulture.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제43권5호
• /
• pp.104-112
• /
• 2006

In this thesis, we analyze performance related to reduction scheme of intercell interference causing serious problems in wiBro system. Frequency reusing factor(FUF) is 1 in WiBro system, and it means that a adjacent cell uses same frequency band. This channel environment raises intercell interference problem, which provokes serious problems related to system performance and channel capacity. Consequently, it affects deterioration in system performance as a whole. We analyze intercell interference when appling a various schemes such as (DCA)Dynamic Channel Allocation, CS(Channel Segregation), IMUFR(Interference Mitigation Using Frequency Reuse), IDMA(Interleave Division Multiple Access), IDMA(Interleave Division Multiple Access), FH-OFDM, CRSA(Conceptual Random Subcarrier Allocation), and HDD

• Journal of Communications and Networks
• /
• 제18권1호
• /
• pp.95-104
• /
• 2016

Massive multiple-input multiple-output (MIMO) is a promising approach for cellular communication due to its energy efficiency and high achievable data rate. These advantages, however, can be realized only when channel state information (CSI) is available at the transmitter. Since there are many antennas, CSI is too large to feed back without compression. To compress CSI, prior work has applied compressive sensing (CS) techniques and the fact that CSI can be sparsified. The adopted sparsifying bases fail, however, to reflect the spatial correlation and channel conditions or to be feasible in practice. In this paper, we propose a new sparsifying basis that reflects the long-term characteristics of the channel, and needs no change as long as the spatial correlation model does not change. We propose a new reconstruction algorithm for CS, and also suggest dimensionality reduction as a compression method. To feed back compressed CSI in practice, we propose a new codebook for the compressed channel quantization assuming no other-cell interference. Numerical results confirm that the proposed channel feedback mechanisms show better performance in point-to-point (single-user) and point-to-multi-point (multi-user) scenarios.

• Journal of Satellite, Information and Communications
• /
• 제9권4호
• /
• pp.104-110
• /
• 2014

This paper considers two reconstruction schemes of structured-sparse signals, turbo inference and Markov chain Monte Carlo (MCMC) inference, in compressed sensing(CS) technique that is recently getting an important issue for an efficient video wireless transmission system using multi-copter as an unmanned aerial vehicle. Proposed reconstruction algorithms are setting importance on reduction of image data sizes, fast reconstruction speed and errorless reconstruction. As a result of experimentation with twenty kinds of images, we can find turbo reconstruction algorithm based on loopy belief propagation(BP) has more excellent performances than MCMC algorithm based on Gibbs sampling as aspects of average reconstruction computation time, normalized mean squared error(NMSE) values.

• Journal of Dental Rehabilitation and Applied Science
• /
• 제34권2호
• /
• pp.104-115
• /
• 2018

Purpose: The purpose of this study is to evaluate the image acquisition ability of intraoral scanners by analyzing the comprehensiveness of scanned images from standardized model, and to identify problems of the model. Materials and Methods: Cast models and 3D-printed models were prepared according to international standards set by ISO12836 and ANSI/ADA no. 132, which were then scanned by model scanner and two different intraoral scanners (TRIOS3 and CS3500). The image acquisition performance of the scanners was classified into three grades, and the study was repeated with varying surface conditions of the models. Results: Model scanner produced the most accurate images in all models. Meanwhile, CS3500 showed good image reproducibility for angled structures and TRIOS3 showed good image reproducibility for rounded structures. As for model ingredients, improved plaster model best reproduced scan images regardless of the type of scanner used. When limited to 3D-printed model, powdered surface condition resulted in higher image quality. Conclusion: When scanning structures beyond FOV (field of view) in standardized models (following ISO12836 and ANSI/ADA 132), lack of reference points to help distinguish different faces confuses the scanning and matching process, resulting in inaccurate display of images. These results imply the need to develop a new standard model not confined to simple pattern repetition and symmetric structure.

• Clinics in Shoulder and Elbow
• /
• 제25권3호
• /
• pp.224-229
• /
• 2022

Background: Most acromioclavicular joint (ACJ) injuries are caused by direct trauma to the shoulders, and various methods and techniques are used to treat them; however, none of the options can be considered the gold standard. This study examines the horizontal stability of the ACJ after a complete dislocation was repaired using one of two Ethibond suture techniques, the loop technique and the two holes in the clavicle technique. Methods: In this single-blind, randomized clinical trial, 104 patients diagnosed with complete ACJ dislocation type V were treated using Ethibond sutures with either the loop technique or the two holes in the clavicle technique. Horizontal changes in the ACJ were radiographically assessed in the lateral axial view, and shoulder function was evaluated by the Constant (CS) and Taft (TS) scores at intervals of 3, 6, and 12 months after surgery. Results: The horizontal stability of the ACJ was better with the two-hole technique than the loop technique at all measurement times. CS and TS changes showed a significant upward trend over time with both techniques. The mean CS and TS at the final visit were 95.2 and 11.6 with the loop technique and 94.0 and 11.9 with the two-hole technique, respectively. The incidence of superficial infections caused by the subcutaneous pins was the same in the two groups. Conclusions: Due to the improved ACJ stability with the two-hole technique, it appears to be a more suitable option than the loop technique for AC joint reduction.

• Tuberculosis and Respiratory Diseases
• /
• 제45권6호
• /
• pp.1154-1166
• /
• 1998

Background : In the management of patients whose primary chemotherapy has failed, careful assessment is essential. It is important to find out as accurate a chemotherapy history as possible. Preferably it should contain the drugs which has never used before. The purpose of present study is establishment of retreatment regimen for pulmonary tuberculosis. The present report concerns the results of retreatment of pulmonary tuberculosis patients treated at National Masan Tuberculosis Hospital. Methods : Retrospective cohort study was made of 104 drug-resistant pulmonary tuberculosis patients who were treated by five regimens between Jan. 1994 and Nov. 1996. All the patients taken medicine for second anti-tuberculosis regimens for the first time. We separated the patients by three groups(Group I ; OFX+PTA+CS+PAS+Aminoglycoside, Group II : PZA+PTA+CS+PAS+Aminoglycoside, Group III : PZA+OFX+PTA+PAS+Aminoglycoside). Results : The age distribution was most frequent in fourth decade(36patients, 34.6%) and the mean age was 42.6 year. The sex distribution was more frequent in the males(81 patients, 85.7%). There was 31 patients(29.8%) with combined diseaes, 18 patients with complication and 24 patients(27.9%) with family history. Primary chemotherapy regimens were HERZ(S or K) in 48 patients (46.2%), HER(S or K) in 41 patients(39.4%) and others in 15 patients(14.4%). Result of drug sensitivity test showed that the resistance to INH and RFP is in 68 patients(65.4%), RFP is 12 patients(11.5%), INH is in 3 patients(2.9%) and all sensitive to INH and RFP is 3 patients(2.9%). The clinical symptoms on admission were coughing(89.4%), sputum(69.2%), dyspnea on exertion(37.5%), weight loss(33.7%) blood tinged sputum(15.4%) and others. The extent of disease on the radiograph was far-advanced in 73 patients(70.2%), moderate in 28 patients(26.9%) and minimal in 3 patients(2.9%). The side effects for drugs were gastrointestinal troubles in 31 patients(29.8%), arthralgia in 22 patients(21.2%), skin rash in 12 patients(11.5%) and others. The negative conversion rate on sputum AFB smear was 85.6%(87.5% in Group I, 80.0% in Group II and 90.5% in Group III). The average negative conversion time on sputum was 4 month(4.0 month in Group I, 4.6 month in Group II and 3.0 month in Group III). Conclusion : In the retreatment of pulmonary tuberculosis, ofloxacin is useful drug for the patients who are not available to use PZA and combination of PZA and OFX can be use effectively substituting for CS.