• 대한토목학회논문집
• /
• 제26권5C호
• /
• pp.333-342
• /
• 2006

본 연구에서는 방사내측배수 조건하에서 일정변형률 압밀시험을 실시할 수 있는 실내시험용 압밀실을 개발하였다. 또한 이를 분석하고 관련 압밀특성을 결정할 수 있는 이론해를 제안하였다. 성형 카올리나이트를 이용하여 개발된 시험기에 의한 방사내측 일정변형률 압밀시험과 더불어 비교 대상이 되는 방사내측배수, 연직배수와 방사외측배수에 대한 단계재하 압밀시험과 방사외측배수 및 연직배수 일정변형률 시험을 실시하였다. 이를 통하여 개발된 방사내측배수 일정변형율 시험기의 결과들이 타 실험방법의 결과들과 일치할 뿐만 아니라, 시료 교란 효과가 줄어든 안정적이고, 신뢰성 높은 결과를 제시하는 것을 확인하였다.

• 한국농공학회지
• /
• 제42권3호
• /
• pp.89-96
• /
• 2000

Most soft ground in the southern and western coasts in Korea consists of very compressible alluvial deposits. Four samples in these alluvial deposite were selected to manifest the constitutive relations of consolidation. A series of tests were performed to investigate void ratio -effective stress relationand void ratio-coefficient of permeability relation on soil samples obtained at Haenam. Jindo Mankyung and Janghung permeabilities by CRS thoery were similar to directly measured data but those of indirectly computed by $C\upsilon$ shows difference. Several models about compressibility and permeability were compared with test data.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.39-50
• /
• 2014

PURPOSES : The objective of this study is to evaluate the curing and adhesive behavior of asphalt emulsions including polymer-modified emulsions for chip seals and fog seals. METHODS : For the laboratory testing, the evaporation test, the bitumen bond strength (BBS) test, and the Vialit test are used. Also, the rolling ball test and the damping test are employed to evaluate the curing properties of the fog seal emulsions. In order to conduct all the tests in controled condition, all test procedures are performed in the environmental chamber. The CRS-2L and the SBS CRS-2P emulsions are used as a polymer-modified emulsion, and then unmodified emulsion, the CRS-2, is compared for the evaluation of chip seal performance. For the fog seal performance evaluation, two types of polymer-modified emulsions (FPME-1 and FPME-2) and one of unmodified emulsion, the CSS-1H, are employed. All the tests are performed at different curing times and temperatures. RESULTS AND CONCLUSIONS : Overall, PMEs show better curing and adhesive behavior than non-PMEs regardless of treatments types. Especially, the curing and adhesive behavior of PMEs is much better than non-PMEs before 120 minutes of curing time. Since all the test results indicate that after 120 minutes of curing time the curing adhesive behavior of emulsions, the early curing time, i.e., 120 minutes, plays an important role in the performance of chip seals and fog seals.

• 한국지반환경공학회 논문집
• /
• 제3권3호
• /
• pp.15-25
• /
• 2002

투수계수는 연약점토의 기본 공학 특성 중 하나로서, 투수계수 값은 점토의 압밀과정뿐만 아니라 토양 내 오염물질의 이동에도 관계된다. 일반적으로 압밀이 진행되는 동안 간극비의 감소로 인해 점토의 투수계수 값은 감소하게 된다. Kozeny와 Carman 이후의 많은 연구자들이 다음의 관계로 간극비와 투수계수의 관계를 제안하였다. (1) log e - log k(1+e), (2) e - log k, (3) log e - log k. 본 연구에서는 대표적 국내 해성점토인 김해점토와 군산점토에 대하여 일정변형률(CRS) 압밀시험 수행하였다. 시험결과로부터 위의 관계식들은 군산점토와 김해점토에 모두 적용 가능한 것으로 나타났으며, 김해점토의 경우 경험적 관계식인 $C_k=0.5e_o$를 잘 만족하고 있으나 군산점토의 경우는 그렇지 않은 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.147-157
• /
• 2002

본 연구에서는 방사방향의 배수조건을 갖는 점성토의 압밀특성을 짧은 시간에 정확하게 평가할 수 있는 방사배수 일정변형률 압밀시험을 위한 시험기와 해석이론을 개발하였다. 개발된 시험기 및 해석이론에 대한 적용성을 검토하기 위하여 성형시료 및 불교란 시료에 대하여 방사배수 일정변형률 압밀시험과 단계하중 압밀시험을 실시하였다. 압밀곡선으로부터 평가되는 압밀정수 및 압밀계수에 대한 비교, 분석을 통하여 제안된 시험기 및 이론의 신뢰성과 적용성을 평가하였고, 방사배수 시험과 더불어 수행된 연직배수 일정변형률 압밀시험과 단계하중 압밀시험을 통하여 배수방향에 따른 영향과 시험기 및 해석이론의 적용성을 분석하였다. 또한, 일정변형률 압밀시험시 발생하는 과잉간극수압에 대한 분석을 통하여 간극수압의 발생 양상 및 실험결과에 미치는 영향을 확인하였다.

• 대한물리의학회지
• /
• 제17권1호
• /
• pp.49-61
• /
• 2022

PURPOSE: This study compared the effects of proprioceptive sensation, subacromial space, and dynamic function according to proprioceptive neuromuscular facilitation (PNF), static stretching (SS), and complex rotational stretching (CRS). METHODS: Thirty students without any musculoskeletal disease who volunteered to participate were included in this study. The following metrics were measured to evaluate the function and stability under the normal conditions, with the PNF, SS, and CRS: special test and flexion, extension, abduction, adduction, internal rotation, external rotation (shoulder range of motion) and reaching distance on the medial (ME), superolateral (SL), inferolateral (IL), and subacromial space and proprioceptive sensation were evaluated. All measures were analyzed using one-way ANOVA and repeated measures of ANOVA. RESULTS: A clear difference in adduction in the range of motion was observed in all groups (p < .05). Significant differences could not be identified in all values in the error test, except for Ab (p < .05). Significant differences in reach were noted in all directions of the SS and PNF in the Me, SL, and IL (p < .05). After the intervention, significant differences in the average values could be identified in all groups except for the SS group after rest (p < .05). After the intervention, there was a significant difference between the CRS and SS and PNF groups (p < .05). CONCLUSION: The application of CRS is as helpful as the existing SS and PNF for improving the joint range of motion improvement, shoulder balance, and subacromial space.

• 한국지반공학회논문집
• /
• 제20권6호
• /
• pp.109-118
• /
• 2004

점토의 압밀은 시간적 지연을 갖는 현상으로 시간적 지연은 소성적 지연시간과 수리적 지연시간으로 나눠진다. 본 연구에서는 점토의 2차압밀이 압밀침하에 어떠한 영향을 미치는지를 알고자 CRS 시험을 실시하였다. 시험결과 소성적 지연시간은 선행압밀하중을 구하는데 큰 영향을 미치는 것으로 나타났고, 압밀하중과 압밀지연시간으로부터 유사선행압밀하중을 예측하는 식을 제안하였다. 또 압밀지연시간에 따른 압밀계수의 특징은 선행압밀 전까지는 큰 범위의 값을 가지나 선행압밀하중의 약 2배 지점을 지나서는 압밀지연시간에 관계없이 일정한 값으로 수렴하는 경향을 나타냈다. 그리고 정규압밀영역에서의 투수계수는 간극비와 밀접한 관계에 있으며, Samarasinghe 등의 제안식을 이용하여 시험결과로부터 투수상수 n, $C_1$값을 결정하였고, Kozeny-Carman 제안식과 비교분석하여 보았다. 투수계수와 간극비 관계에서도 압밀지연시간에 의한 지연압축으로 인하여 aging effect를 관찰할 수 있었다.

• Korean Journal of Acupuncture
• /
• 제38권3호
• /
• pp.162-174
• /
• 2021

Objectives : We aimed to identify the antidepressant effect of liver tonification acupuncture treatment (ACU (LT); KI10, LR8, LU8, LR4) and four gate acupuncture treatment (ACU (FG); LI4, LR3) and its brain neural activity in the normal and chronic restraint stress (CRS)-induced mouse model. Methods : Firstly, normal mice were given ACU (LT) or ACU (FG) and the c-Fos expressions in each brain region were analyzed to examine brain neural activity. Secondly, CRS was administered to mice for 4 weeks, then ACU (LT) or ACU (FG) was performed for 2 weeks. The depression-like behavior was evaluated using open field test (OFT) before and after acupuncture treatment. Then, the c-Fos expressions in each brain region were analyzed to examine brain neural activity. Results : In normal mice, ACU (FG) regulated brain neural activities in the hypothalamus, hippocampus, and periaqueductal gray. ACU (LT) changed more brain regions in the prefrontal cortex, insular cortex, striatum, and hippocampus, including those altered by ACU (FG). In CRS-induced model, ACU (LT) alleviated depression-like behavior more than ACU (FG). Also, brain neural activities in the motor cortex area 2 (M2), agranular ventral part and piriform of insular cortex (AIV and Pir), and cornu ammonis (CA) 1 and CA3 of hippocampus were changed by ACU (LT), and those of AIV and CA3 were also changed by ACU (FG). As in normal mice, ACU (LT) resulted in changes in more brain regions, including those altered by ACU (FG) in CRS model. M2, Pir, and CA1 were only changed by ACU (LT) in depression model, suggesting that these brain regions reflect the specific effect of ACU (LT). Conclusions : ACU (LT) relieved depression-like behavior more than ACU (FG), and this acupuncture effect was associated with modulation of brain neural activities in the motor cortex, insular cortex, and hippocampus.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.647-654
• /
• 2000

During consolidation, the permeability of clay decreases with void ratio because of the reduction in total void space. After Kozeny(1927) and Carman(1956), many researchers have proposed the relations between void ratio and permeability. Most of the relations are expressed in the following forms as : (1) log e - log k(1+e), (2) e - log k, or (3) log e - log k. These relations have been found valid for a large number of normally consolidated clays. From laboratory test(CRS and I $L_{CON}$) results, the relation between void ratio and permeability of Kimhae clay was well defined in all of the three forms. Permeability change index, $C_{k}$, of Kimhae clay was in the range of 0.64~1,03 and average value of $C_{k}$ was 0.821. And the test results satisfied the experimental correlation between $C_{k}$ and e, $C_{k}$=0.5e. In log e - log k(1+e) relation, constant C was in the range of 1.91~4.74$\times$10$^{-8}$ cm/sec and n was in the range of 3.74~4.60.c and n was in the range of 3.74~4.60.74~4.60.0.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.1-8
• /
• 2014

PURPOSES : The objective of this study is to evaluate the bond strength of asphalt emulsions including polymer-modified emulsions for chip seals and fog seals using the bitumen bond strength (BBS) test. METHODS : For the laboratory testing, the Pneumatic Adhesion tensile Testing Instrument(PATTI) device is used to measure the bond strength between the asphalt emulsion and aggregate substrate based on the AASHTO TP-91. In order to conduct all the tests in controled condition, all test procedures are performed in the environmental chamber. The CRS-2L and the SBS CRS-2P emulsions are used as a polymer-modified emulsion, and then unmodified emulsion, the CRS-2, is compared for the evaluation of chip seal performance. For the fog seal performance evaluation, two types of polymer-modified emulsions and one of unmodified emulsion, the CSS-1H, are employed. For chip seal study, the BBS tests are performed at 30, 60, 120, and 240 minutes of curing times with curing and testing temperatures of $15^{\circ}C$, $25^{\circ}C$, and $35^{\circ}C$. The fog seal tests are conducted at 30, 60, 90, 120, 180 minutes, and 24 hours with curing and testing temperatures of $25^{\circ}C$, $30^{\circ}C$, and $35^{\circ}C$. RESULTS AND CONCLUSIONS : Overall, chip seal emulsions and fog seal emulsions show the similar bond strength trend. At the same testing condition, polymer-modified emulsions show better bond strength than unmodified emulsions. Also, there is no significant difference between polymer-modified emulsions. One of important findings is that the most bond strength reaches their final bond strength within one hour of curing time. Therefore, the early curing time plays a vital role in the performance of chip seals and fog seals.