• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.3
• /
• pp.93-104
• /
• 2018

It is mandatory to use car seats for infants and children in the private vehicles in accordance with the traffic law of Korea. Recently, legislation has also been proposed to expand the use car seats to express and intercity buses. This reflects a growing consensus that mandatory infant and child car seats, both for private and commercial vehicles, are essential. However, Korean laws concerning infants and children on board aircraft allow parents or guardians to hold children under two years of age on their laps without any restraint devices. It is not possible for a parent to physically restrain an infant or child, especially during a sudden acceleration or deceleration, unanticipated or severe turbulence, or impact. The use of CRS provides an equivalent level of safety to infants and children as that afforded to adult passengers wearing seat belts. But there is no regulation even about Child Restraint Systems on board aircraft in Korea. To enhance their safety, infants and children should be restrained in an approved child restraint system that is appropriate to their weight and height. It is necessary to examine whether infants and children in flight can achieve the same level of safety as an adult.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.2
• /
• pp.1-9
• /
• 2010

This study was carried out to comparison of coefficient of consolidation and the prediction of excess pore water pressure in agricultural reservoir on soft clay ground. For the purpose of verification of the proposed equation, laboratory model tests and field tests were performed and excess pore water pressure was compared to those predicted with the Terzaghi's method. The predicted excess pore water pressure according to ponding was very applicable to practice because it was close to the observed data. Also, for the comparison of coefficient of consolidation, the oedometer, constant rate of strain (CRS), and Rowe cell tests were performed. The coefficient of consolidation at the Rowe cell and CRS tests showed a greate increase than in the oedometer test. The ratio of the vertical and horizontal coefficient of consolidation showed a large difference according to various tests method and mixing ratio. Therefore, it is recommended that careful attention should be paid to predicting the required consolidation period in agricultural reservoir.

• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.76-83
• /
• 2010

The purpose of this study is to propose a method to decide near-optimal settings of the constant current fuzzy control parameters using a controlled random search. This method tries to find the near-optimal settings of the constant current fuzzy control parameters through experiments. It has an advantage of being able to carry out searches in the search domain which includes some irregular points. The method suggested in this study was used to determine the fuzzy control parameters by which the desired welding current were formed during inverter DC resistance spot welding. The output variable was the ITAE (integral of time multiplied by the absolute error). This output variable was determined according to the input variables, which are the GE, GDE, and GDU. This study described how to obtained near-optimal welding current condition over a wide search space conducting a relatively small number of experiments.

• Korean Management Science Review
• /
• v.33 no.2
• /
• pp.75-87
• /
• 2016

Quality function deployment (QFD) is a widely adopted customer-oriented product development methodology by analyzing customer requirements. It is a main activity in QFD planning process to determine the optimal values of the technical attributes (TAs) so as to achieve the customer requirements (CRs) from the House of Quality (HoQ). In most of the previous research, all the TAs in QFD are assumed to have either continuous or discrete values. In the real world applications, the continuous TAs and the discrete TAs are often mixed in QFD. In this paper, a mixed integer linear programming model is formulated to obtain the optimal values for the continuous TAs and the discrete TAs in QFD planning as well as Branch and Bound (B and B) algorithm is proposed as the solution approach. Finally, the proposed model and solution approach are illustrated with an office chair under multi-segment market, and the sensitivity analysis is performed to study how the proposed model and its solutions respond to the variation for the two elements which are budget and CRs' weights.

• Journal of The Korean Astronomical Society
• /
• v.37 no.4
• /
• pp.225-232
• /
• 2004

Shocks are ubiquitous in astrophysical environments and cosmic-rays (CRs) are known to be accelerated at collisionless shocks via diffusive shock acceleration. It is believed that the CR pressure is important in the evolution of the interstellar medium of our galaxy and most of galactic CRs with energies up to ${\~}\;10^{15}$ eV are accelerated by supernova remnant shocks. In this contribution we have studied the CR acceleration at shocks through numerical simulation of 1D, quasi-parallel shocks for a wide range of shock Mach numbers and shock speeds. We show that CR modified shocks evolve to time-asymptotic states by the time injected particles are accelerated to moderately relativistic energies, and that two shocks with the same Mach number, but with different shock speeds, evolve qualitatively similarly when the results are presented in terms of a characteristic diffusion length and diffusion time. We find that $10^{-4} - 10^{-3}$ of the particles passed through the shock are accelerated to form the CR population, and the injection rate is higher for shocks with higher Mach number. The time asymptotic value for the CR acceleration efficiency is controlled mainly by shock Mach number, and high Mach number shocks all evolve towards efficiencies ${\~}50\%$, regardless of the injection rate and upstream CR pressure. We conclude that the injection rates in strong quasi-parallel shocks are sufficient to lead to significant nonlinear modifications to the shock structures, implying the importance of the CR acceleration at astrophysical shocks.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.128.2-128.2
• /
• 2011

Experiments to study high-energy cosmic rays (CRs) employ Monte Carlo codes for extensive air shower (EAS) simulations to figure out the properties of CRs. COSMOS and CORSIKA among EAS simulation codes are currently being used to analyze the data of the Telescope Array experiment. We have generated a library of about 10,000 simulated EASs with the primary energy ranging from $10^{18.5}eV$ to $10^{20}eV$ and the zenith angle of primary particles ranging from 0 to 45 degree for proton and iron primaries. We have compared the results predicted by CORSIKA and COSMOS under the same condition. In this talk, we show the differences in the energy spectra at the ground, the longitudinal shower profile as a function of atmospheric depth, the Calorimetric energy, and the Xmax distribution. We also discuss the lateral distribution function obtained from GEANT4 simulations which is being used to measure the detector response.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.2
• /
• pp.120-128
• /
• 2015

Quality function deployment (QFD) is a useful method in product design and development to maximize customer satisfaction. In the QFD, the technical attributes (TAs) affecting the product performance are identified, and product performance is improved to optimize customer requirements (CRs). For product development, determining the optimal levels of TAs is crucial during QFD optimization. Many optimization methods have been proposed to obtain the optimal levels of TAs in QFD. In these studies, the levels of TAs are assumed to be continuous while they are often taken as discrete in real world application. Another assumption in QFD optimization is that the requirements of the heterogeneous customers can be generalized and hence only one house of quality (HoQ) is used to connect with CRs. However, customers often have various requirements and preferences on a product. Therefore, a product market can be partitioned into several market segments, each of which contains a number of customers with homogeneous preferences. To overcome these problems, this paper proposes an optimization approach to find the optimal set of TAs under multi-segment market. Dynamic Programming (DP) methodology is developed to maximize the overall customer satisfaction for the market considering the weights of importance of different segments. Finally, a case study is provided for illustrating the proposed optimization approach.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.168.1-168.1
• /
• 2013

고분자유기물로 사용되는 발광층에 탄소나노튜브를 합성하여 AC로 구동되는 고분자유기물소자를 제작하였다. 고분자유기물소자는 총 4개의 층(ITO/CRS/탄소나노튜브를 함유한 MEH-PPV/Al)으로 구성하였다. ITO가 코팅된 유리기판 위에 발광층을 보호하는 역할을 하는 절연층[cyanoethyl pullulan(CRS)], 유기발광물질인 poly[2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene-vinylene](MEH-PPV)에 탄소나노튜브의 함량을 조절하여 발광층으로 사용하였으며, 절연층과 발광층은 스핀코우터를 이용하여 증착하다. 마지막으로 thermal evaporator을 이용하여 Al을 증착하였다. 고분자유기물소자는 발광층에 함유된 탄소나노튜브에 함량에 따른 전압, 전류 그리고 밝기 특성을 분석하였다. 탄소나노튜브가 0.015wt% 함유된 고분자유기물소자에서 최대 밝기 특성과 낮은 소비전력을 얻을 수 있었다. 고분자유기물에 탄소나노튜브를 합성된 효과를 알아보기 위하여 임피던스분석을 통하여 고분자유기물소자의 저항, 캐패시턴스, 기생저항을 알아보았다. 고분자유기물소자의 캐패시턴스의 변화는 탄소나노튜브와 고분자 유기물(polymer-CNT matrix) 에서 생성되는 블록들이 매우 얇은 유전층을 구성할 것으로 예상되며 이는 micro-capacitance로 고분자유기물소자의 구동에 영향을 미치는 것으로 예상된다. AC구동 고분자유기물소자에 탄소나노튜브를 함유하여 높은 효율을 얻을 수 있는 장점으로 차세대 디스플레이나 조명으로 탄소나노튜브의 쓰임새를 기대해 본다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1128-1133
• /
• 2008

Context-aware computing has been attracting the attention as an approach to alleviating the inconvenience in human-computer interactions. This paper proposes a context-aware system architecture to be implemented on an UoC (Ubiquitous system on Chip). A new proposed technology of CRS (Context Recognition Switch) and DOS (Dynamic and Optimal Standard) based on Context-awareness system architecture with pre-processor, HPSP(High Performance Signal Processor) in this paper. And proposed a new algorithm using in network topology processor shows for Ubiquitous Computing System. implementing in UoC (Ubiquitous System on Chip) base on the IEEE 802.15.4 WPAN (Wireless Personal Area Network) standard. Also, This context-aware based UoC architecture has been developed to apply to mobile intelligent robots which would support human in a context-aware manner.

• Journal of Korean Society of Archives and Records Management
• /
• v.2 no.2
• /
• pp.39-68
• /
• 2002

Many problems of archival description in new environments can be solved by building archival authority databases. This study examines function and structure of archival authority records comparing with library authority records, and analyses the archival authority records in NARA system and Australian CRS System which accepts dynamic description process for archival records. Based on these investigations, some development directions for national archival authority database are recommended.