• Journal of Environmental Science International
• /
• v.25 no.12
• /
• pp.1689-1699
• /
• 2016

The growth conditions of planted trees, invasion of nuisance herbaceous species, competition between species, and effects of erosion control were monitored over five years in a riparian greenspace in Gapyeong County that was established through multilayered and grouped ecological planting. Of 156 trees planted in the upper and middle layers, 5.8% died. This tree death was attributed to poor drainage or aeration in the rooting zone from the clay-added root ball and too deep planting as well as a small-sized root ball and scanty fine roots. Of all the trees, 21.6% grew poorly due to transplant stress in the first year after planting, but they started to grow vigorously in the third year. This good growth was largely associated with soil improvement before planting, selection of appropriate tree species based on growth ground, and control of dryness and invasive climbing plants through surface mulching and multilayered/grouped planting. Mixed planting of fast-growing species as temporary trees was desirable for accelerating planting effect and increasing planting density. Thinning of fast-growing trees was required in the fifth year after planting to avoid considerable competition with target species. To reduce the invasion of herbaceous and climbing plants that oppress normal growth of planted trees, higher density planting of trees (crown opening of about 15%), woodchip mulching to a 10-cm depth, and edge planting 2 m wide were more effective than lower density planting (crown opening of 70%), no surface mulching, and no edge planting, respectively. This reduction effect was especially great during the first three years after planting. Nuisance herbaceous plants rarely invaded higher density planting with woodchip mulching over the five years. Higher density planting or woodchip mulching also showed much greater erosion control through rainfall interception and buffering than lower density planting with no mulching did. Based on these results, desirable planting and management strategies are suggested to improve the functions of riparian greenspaces.

• Journal of the Korean Chemical Society
• /
• v.39 no.7
• /
• pp.524-529
• /
• 1995

The separation efficiency of metal ions by using silica gel bonded 15-crown-5 (SGBM) has been determined by column chromatography in aqueous solution at pH 1. Bindinng constants and separation factors for several SGBM-Metal interactions were measured in aqueous solution. The order of these binding constants and separation factors with metal ions was Li(Ⅰ) < Sr(Ⅱ) < Na(Ⅰ) < Cu(Ⅱ) < Mg(Ⅱ) < K(Ⅰ) < Ca(Ⅱ) < Bi(Ⅲ) < Sb(Ⅲ). These results were explained in terms of the size effect and electron density effect. This experimental results showed good efficiency for separation of $Sb^{3+}$ from mixtures of alkali, alkaline earth metal ions, and $Cu^{2+}$ in aqueous solution.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2669-2674
• /
• 2012

Crown ether is one of well-known host molecules and able to selectively sequester metal cation. We employed M06-2X density functional theory with IEFPCM and SMD continuum solvation models to study selectivity of dibenzo-18-crown-6-ether (DB18C6) for alkaline earth dications, $Ba^{2+}$, $Sr^{2+}$, $Ca^{2+}$, and $Mg^{2+}$ in the gas phase and in aqueous solution. $Mg^{2+}$ showed predominantly strong binding affinity in the gas phase because of strong polarization of CO bonds by cation. In aqueous solution, binding free energy differences became smaller among these dications. However, $Mg^{2+}$ had the best binding, being incompatible with experimental observations in aqueous solution. The enthalpies of the dication exchange reaction between DB18C6 and water cluster molecules were computed as another estimation of selectivity in aqueous solution. These results also demonstrated that $Mg^{2+}$ bound to DB18C6 better than $Ba^{2+}$. We speculated that the species determining selectivity in water could be 2:1 complexes of two DB18C6s and one dication.

• Journal of environmental and Sanitary engineering
• /
• v.21 no.4 s.62
• /
• pp.49-60
• /
• 2006

The ion exchange resins have been synthesized from chlormethyl styrene - 1,4 - divinylbenzene(DVB) with 1%, 2%, 4% and 8%-crosslinking and 1-aza-18-crown-6 macrocyclic ligand by copolymerization method. Content of chlorine in styrene-DVB copolymer was decreased as crosslink increased and it is because as crosslink increased 1%, 2%, 4% and 8% DVB content increased and crosslink density increased and cavity was reduced. Functional group of resin almost disappeared as C-C1 peak around $700cm^{-1}$ was substituted with 1-aza-18-C-6 macrocyclic ligand and new peak of C-N around $1020cm^{-1}$ appeared, so it was confirmed that styrene-DVB copolymer and ligand were compounded. As crosslink increased in the analysis of element contents, it resulted in the reduction of nitrogen content and it is because as crosslink increased, it led to the reduction of chlorine content in the process of substitution reaction and it affected macrocyclic ligand substituted. Thermo analysis curve of functional synthetic resin decomposed three part of 1-aza-18-C-6, styrene, and DVB. Form of functional synthetic resin showed distortion of its particles as macrocyclic ligand was introduced to styrene-DVB copolymer and hydrogen of ligand caused substitution with chlorine element of styrene molecule.

• Journal of Korean Society of Forest Science
• /
• v.98 no.5
• /
• pp.576-583
• /
• 2009

Based on the stem analysis and biomass measurement of 36 trees and 1,576 branches in Pinus sylvestris var. mongolica (Mongolian pine) plantations of Northeast China, this study was conducted to develop estimation model equation for leaf biomass of a single tree and branch, to examine the vertical distribution of leaf biomass in the crown, and to evaluate the proportional ratios of biomass by tree parts, stem, branch, and leaf. The results indicated that DBH and crown length were quite appropriate to estimate leaf biomass. The biomass of single branch was highly correlated with branch collar diameter and relative height of branch in the crown, but not much with stand density, site quality, and tree height. Weibull distribution function would have been appropriate to express vertical distribution of leaf biomass. The shape parameters from 29 sample trees out of 36 were less than 3.6, indicating that vertical distribution of leaf biomass in the crown was displayed by bell-shaped curve, a little inclined toward positive side. Apparent correlationship was obtained between leaf biomass and branch biomass having resulted in linear function equation. The stem biomass occupied around 80% and branch and leaf made up about 20% of total biomass in a single tree. As the level of tree class was increased from class I to class V, the proportion of the stem biomass to total biomass was gradually increased, but that of branch and leaf became decreased.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.9-21
• /
• 1983

The structures of oak stands were studied in relation to their productivity. Three plots classified by the site quality following to altitude, were selected on the oak stand located at Naryongri Eunsanmyun Buyeogun. The site qualities of the stand studied were generally estimated to be moderate in respect to some soil physical and chemical properties. Quercus variabilis was dominant species in the vegetation composition of the stand studied. The crown densities of the stand were varied from 65.4% in plot I to 78.2% in plot III and the parts, occupied with oak trees, ranged from 44.4% in plot I to 65.9% in plot III in the density. In the contrast to crown density, the growing stocks of oak trees ranged from $3.937m^3$ in plot I (73.4% of plot total) to $2.075m^3$ in plot III (84.3% of plot total). The occupied ratios, measured by crown class, exhibited dissimilarity between crown projection area and volume, and also the ratios brought into different patterns by plot. Highly significant correlations were proved between crown projection areas and volumes of individual oak trees by plot, but not proved in the relations by crown class. The cumulative growth, current annual increment and mean annual increment displayed various patterns by plot and by crown class in the heights, D. B. H. s and volumes of oak trees. The maximum values of current annual increment of height were generally recorded in 10 to 20 years, earlier than those of D. B. H. The mean annual increment of height, D. B. H. and volume maintained similar levels after about 10 years and fluctuated irregularly. The crown projection area and volume following to thinning decreased in the order of the thinning methods of grade A < grade B < crown thinning$90m^3/ha$ in about 40 years in the productivity of volume of the oak stand studied.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.420-428
• /
• 2019

This study is the heating energy saving test of the high-bed strawberry crown heating system. The system consists of electric hot water boiler, thermal storage tank, circulation pump, crown heating pipe(white low density polyethylene, diameter 16mm) and a temperature control panel. For crown heating, the hot water pipe was installed as close as possible to the crown part after planting the seedlings and the pipe position was fixed with a horticultural fixing pin. In the local heating type, hot water at $20{\sim}23^{\circ}C$ is stored in the themal tank by using an electric hot water boiler, and crown spot is partially heated at the setting temperature of $13{\sim}15^{\circ}C$ by turning on/off the circulation pump using a temperature sensor for controlling the hot water circulation pump which was installed at the very close to crown of strawberry. The treatment of test zone consisted of space heating $4^{\circ}C$ + crown heating(treatment 1), space heating $8^{\circ}C$(control), space heating $6^{\circ}C$ + crown heating(treatment 2). And strawberries were planted in the number of 980 for each treatment. The heating energy consumption was compared between November 8, 2017 and March 30, 2018. Accumulated power consumption is converted to integrated kerosene consumption. The converted kerosene consumption is 1,320L(100%) for space $8^{\circ}C$ heating, 928L(70.3%) for space $4^{\circ}C$ + crown heating, 1,161L($88^{\circ}C$) for space $6^{\circ}C$ + crown heating). It was analyzed that space $4^{\circ}C$ + pipe heating and space $6^{\circ}C$ + crown heating save heating energy of 29.7% and 12% respectively compared to $8^{\circ}C$ space heating(control).

• Korean Journal of Environment and Ecology
• /
• v.34 no.5
• /
• pp.425-435
• /
• 2020

This study aims to investigate the impact of the physical structure, such as altitude, slope gradient, slope direction, and topographical structure, and the vegetation pattern, such as existing vegetation, diameter of breast height (DBH), and crown density, on climate. The analysis results showed the significant difference in relative humidity, wind speed, and solar radiation at varying altitudes, the significant difference in all climate factors except for the wind speed at varying slope gradient, and significant difference in temperature and relative humanity at varying slope direction. The topographic structures were divided into valleys, slopes, and ridges. They were found to differ in relative humidity. However, the differences between constant trends and types were found to be insignificant concerning temperature, wind speed, and solar radiation. Significant differences in temperature, relative humidity, and wind speed were recorded with changing existing vegetation. The DBH showed a significant difference in temperature, wind speed, and solar radiation. The crown density showed a significant difference in temperature and solar radiation. The result of the relationship analysis for the analysis of the effect of vegetation pattern and physical structure on the meteorological environment showed that temperature was affected by slope gradient, slope direction, DBH, and crown density. The relative humidity was correlated with the altitude, slope gradient, slope direction, and topological structure in physical structure and the existing vegetation and crow density in vegetation pattern. The wind speed was correlated with the altitude, existing vegetation, and DHB, and the solar radiation was correlated with the slope gradient, DHG, and crown density. The crown density was the most overall significant factor in temperature, relative humidity, and solar radiation, followed by the slope gradient. DBH was also found to be highly correlated with temperature and solar radiation and significantly correlated with wind speed, but there was no statistically significant correlation with relative humidity.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.1
• /
• pp.77-88
• /
• 2011

This study was carried out to investigate the effects of soil depth and planting density on the growth of lettuce, crown daisy, and strawberry on a rooftop condition using artificial soil as a growth media. The vegetable crops showed better growth for plant height (cm), plant width (cm), plant fresh weight (g), and Fo, Fm and Fv/m on 20cm depth soil than 10cm depth soil except strawberry. Planting density of $16/m^2$ and $64/m^2$ did not show significant differences on the growth of the crops. Soil moisture content and EC were low for 10cm depth soil in lettuce plots, whereas there was no significant differences on soil moisture and EC between two soil depth in strawberry plots. Hunter's L, a, and b values showed the leaf color of lettuce dark green on 20cm depth soil and reddish on 10cm depth soil. Results showed that soil depth suitable for crop growth on rooftop conditions was 20cm rather than 10cm. Growth response of the crops showed no significant difference between $16/m^2$ and $64/m^2$, indicating that planting density of 64 $plants/m^2$ could be practiced on rooftop conditions. Lettuce growth rapidly changed in control treatment in which leaves were not pinched out, while slowly changed in plants which leaves were periodically pinched out. In the case of control plot, it was impossible to harvest because withering of lower leaves after blossom on June 22. The plant of crown daisy in which pinching was not conducted, blossomed on June 7, and the plants were removed since its aesthetical value was lost. Strawberry seemed to be a suitable vegetable crop for rooftop conditions based on its high covering rate and extended growth period until late October. The soil depth 20cm and planting density 64 $plants/m^2$ were suitable for vegetable crops on green roof system using artificial soil.

• Korean journal of applied entomology
• /
• v.48 no.4
• /
• pp.447-451
• /
• 2009

Locust gall midge (LGM), Obolodiplosis robiniae (Haldeman) (Diptera: Cecidomyiidae), is a cecidomyiid insect forming roll-up galls on leaves of Robinia pseudoacacia Linnaeus (Fabaceae). LGM, known as native to North America, was reported from Korea and Japan in 2002. LGM was observed weekly or biweekly to clarify their voltinism and distribution within the crown of the host tree in two sites of Osan and Siheung in Korea from May to August, 2007. Density of LGM was investigated based on the number of larvae per leaf. Two generations of LGM were observed in Siheung site whereas three generations in Osan site during the present study. The result indicated that LGM had at maximum three generations per year. The density of LGM in Osan was higher in the upper crown of the host trees than middle or lower part. In Siheung, LGMs were distributed more on the exterior of the lower crown than the interior. The average number of larvae per gall was $3.3{\pm}0.1$ and $2.8{\pm}0.1$ individuals per leaf in Osan and Siheung, respectively.