• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.126-126
• /
• 2003

유기트랜지스터에 관한 연구는 1980년 이후부터 시작되었으나 근래에 들어 전 세계적으로 본격적인 연구가 진행되고 있다. 제작공정이 간단하고 비용이 저렴하며 충격에 의해 깨지지 않고 구부리거나 접을 수 있는 전자 회로 기판이 미래의 산업에 필수적인 요소가 될 것으로 예상되고 있으며 이러한 요구를 충족시킬 수 있는 유기트랜지스터의 개발은 아주 중요한 연구분야로 대두되고 있다. 본 연구에서는 표면처리에 따른 contact angle, I-V 특성곡선, 표면 morphology 등의 결과로부터 dry cleaning 한 것이 wet cleaning한 것보다 왜 좋은지를 논하고자 한다. 먼저 N-type SiO$_2$ 기판을 이용하여 back면의 oxide층을 제거한 후, back gate용으로 사용하기 위하여 sputtering장치로 Au/Cr을 증차하였다. 그리고 기판에 앞면을 photolithography 공정을 이용하여 Au/Cr를 1000$\AA$ 증착 하여 source-, drain-eldctrode를 제조하였다. 그리고 SiO$_2$ 기판의 표면처리를 달리하여 그 위에 유기박막을 증착하여 특성을 비교하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.119-122
• /
• 2010

Cognitive Radioo(CR)기술은 주파수 자원을 효율적으로 이용하기 위해 Joseph Mitora가 개념을 적립한 것으로 유비쿼터스 시대의 부족한 주파수 자원을 극복 할 수 있는 기술로 각광받고 있다. 이와 같은 무선인지 기술(CR)을 도입하기 위한 핵심적인 요소는 부사용자(Secondary User)가 주사용자(Primary User)의 통신을 방해하지 않도록 주파수 점유 여부를 정확하게 판단하는 Spectrum Sensing기술이다. 이 스펙트럼 센싱 기술에 두 가지 종류의 에러가 발생하는데 하나는 미검출 오류(miss error)이고 또 하나는 오경보 오류(false alarm error)이다. 따라서 본 논문은 이 두 가지를 합친 검출 오류(detection error)를 최소화 하기위해 협력 스펙트럼 센싱(Cooperative spectrum sensing)에서 몇 명 이상의 부사용자가 주사용자가 사용중이라 검출하였을 때 최종 결정이 주사용자가 사용한다고 결론 짓는 것이 최적인지를 수학적으로 분석하고 그 최적의 K값을 사용하여 전체 시스템의 성능을 향상 시키는 방법을 제시 한다.

• Transactions of Materials Processing
• /
• v.23 no.1
• /
• pp.29-34
• /
• 2014

The damage level of the die surface was predicted by estimating the surface roughness with a finite element analysis and the wear characteristics. Wear and friction tests were conducted to compare the wear characteristics for three kinds of surface treatments - CrN, TiAlN and AlCrN coatings. A prediction model was derived from the surface roughness results with respect to contact pressure and sliding speed which were obtained from the wear test. Surface roughness values for the damage regions of the die surface were compared between the experiments and the prediction model, which shows fairly good agreement with each other.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.11a
• /
• pp.191-192
• /
• 2013

원전 화재 PSA에서 화재 초기사건발생빈도는 전체 노심손상빈도에 직접 비례하여 영향을 주기 때문에 중요한 요소이다. 미국 NRC는 EPRI와의 공동연구를 통하여 원전 화재 PSA의 신규 방법론(NUREG/CR-6850)을 개발하였고, 미국 원전사업자들은 신규 방법론을 적용하여 화재 PSA를 수행하고 있다. 최근 EPRI는 원전 화재 초기사건 발생빈도 추정시 NUREG/CR-6850에서 사용된 화재심각도 분류방법을 개정한 지침서를 발간하였다. 본 논문에서는 신규 분류기준에 대해서 살펴보고, 국내 원전에서 경험한 화재사건에 대해서 신규 분류 기준을 적용하여 고찰하였다.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.768-773
• /
• 1995

We describe a manufacturing method and characteristics on components of molten carbonate fuel cell. Cr, Al, AI$_{2}$O$_{3}$, Co, MgO powder were mixed with Ni powder for anode components and NiO was used for cathode electrode. The electrolyte plate consisted of LiAIO$_{2}$ and carbonate (Li$_{2}$CO$_{3}$/K$_{2}$CO$_{3}$=62/38) and these three were manufactured by doctor-blade method. As a result, open circuit voltage was 1.05[VI at Ni-10Cr anode and porosity was above 60[%].

• Korean Journal of Crystallography
• /
• v.3 no.2
• /
• pp.111-119
• /
• 1992

Alexandrite crystals were grown by the Czochralski method. Relationships between or ystal quality and crystal growth factors such as pulling rate, rotation rate, purity of BeO po wders and evaporation loss compensation of BeO and Cr3+/Al3+substitution ratio were investigated. As a result, 1) high purity (more than 99.99p,) of BeO, as a raw material, is requisite condition for single crystal growth, 2) evaporation loss comp ensation is also requisite for high quality crystal growth. This compensation depends on pulling rate and Cr3+/Al3+ ratio. And 3) optimum pulling and rotation rate for alexandrite growth were 0.5∼1.0mm/hr and 20∼25rpm, respectively. Ale xandrite crystals were grown to (001) direction. Various types of defects were detected by the polarizing microscope and we discussed how to remove these defects. And room tempo rature absorption and fluorescence spectra were measured.

• Journal of Internet Computing and Services
• /
• v.13 no.3
• /
• pp.31-47
• /
• 2012

The mobile Virtual Private Network (MVPN) of Internet Engineering Task Force (IETF) is not designed to support NEwork MObility (NEMO) and is not suitable for real-time applications. Therefore, an architecture and protocol which supports VPN in NEMO are needed. In this paper, we proposed the cost-reduced secure mobility management scheme (CR-SeMMS) which is designed for real-time applications in conjunction with VPN and also which is based on the session initiation protocol (SIP). Our scheme is to support MVPN in NEMO, so that the session is well maintained while the entire network is moved. Further, in order to reduce the authentication delay time which considers as a delaying factor in hands-off operations, the signaling time which occurs to maintain the session is shortened through proposing the hands-off scheme adopting an authentication method based on HMAC based One Time Password (HOTP). Finally, our simulation results show the improvement of the average hands-off performance time between our proposed scheme and the existing schemes.

• Transactions of Materials Processing
• /
• v.29 no.3
• /
• pp.163-171
• /
• 2020

We present a multi-step cold drawing for a non-equiatomic Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ high entropy alloy (HEA) with a simple face-centered cubic (FCC) crystal structure. The distribution of strain in the cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wires was analyzed by the finite element method (FEM). The effective strain was expected to be higher as it was closer to the surface of the wire. However, the reverse shear strain acted to cause a transition in the shear strain behavior. The critical effective strain at which the shear strain transition behavior is completely shifted was predicted to be 4.75. Severely cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wires up to 96% of the maximum cross-sectional reduction ratio were successfully manufactured without breakage. With the assistance of electron back-scattering diffraction and transmission electron microscope analyses, the abundant deformation twins were found in the region of high effective strain, which is a major strengthening mechanism for the cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wire.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.90-98
• /
• 2011

The recognition and classification of paddy rice disease are of major importance to the technical and economical aspect of agricultural industry over the world. Computer vision techniques are used to diagnose rice diseases and to efficiently manage crops. Segmentation of lesions is the most important technique to detect paddy rice disease early and accurately. A new Gaussian Mean (GM) method was proposed to segment paddy rice diseases in various color spaces. Different color spaces produced different results in segmenting paddy diseases. Thus, this empirical study was conducted with the motivation to determine which color space is best for segmentation of rice disease. It included five color spaces; NTSC, CIE, YCbCr, HSV and the normalized RGB(NRGB). The results showed that YCbCr was the best color space for optimal segmentation of the disease lesions with 98.0% of accuracy. Furthermore, the proposed method demonstrated that diseases lesions of paddy rice can be segmented automatically and robustly.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.152-160
• /
• 1993

In this study, we have investigated the influence of sputtering conditions (Ar pressure input powers, substrates) on coercivity and microstructures of GdFe, Co, CoCr thin films produced by the method of DC magnetron sputtering. In GdFe films, we have observed that the Gd atomic ratio was decreased with the deposition rate, and deposition rate decreased with the pressure of Ar gas and the increased linearly with input power. It was also observed that the coercivity of thin films was increased with input power. In Co films, we have investigated the deposition was increased and the Co thin film became finer structure with the increase in the input power, was increased and the Co thin film became finer structure with the increase in the input power, and the deposition rate was decreased with the pressure of Ar gas. In CoCr films, we have investigated the effects of substrates on the coercivity $(H_c)$ and the microstructure. We have found that the substrates plays a crucial role in the microstructure and the coercivity $(H_c)$.