• Title/Summary/Keyword: CR 요소

Search Result 188, Processing Time 0.025 seconds

Evaluation of the Removal Characteristics of Pollutants in Storm Runoff Depending on the Media Properties (여재 특성에 따른 강우 유출수 내 오염물질 제거특성 평가)

  • Kim, Tae-Gyun;Cho, Kang-Woo;Song, Kyung-Guen;Yoon, Min-Hyuk;Ahn, Kyu-Hong;Hong, Sung-Kwan
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.31 no.7
    • /
    • pp.483-490
    • /
    • 2009
  • The aims of this study were to evaluate the removal efficiency for various pollutants in urban storm runoff by a filtration device, and to determine design parameters depending on filter media properties. Appropriate selection of filter media will affect the size and life time of the filtration device. Sets of column tests were performed in order to evaluate the removal efficiency by perlite and a synthetic resin. An investigation of surface properties including CEC (cation exchange capacity) and zeta-potential suggested that the perlite had a superior adsorption capability for cationic pollutants. TCODcr and turbidity were analyzed to investigate the removal characteristic of particulate pollutant. In both columns, the particles in the collected storm runoff was almost completely capture with a small EBCT (empty bed contact time) of 2.5 minutes. Complete clogging at the EBCT of 2.5 minutes occurred after 630 minutes in the perlite column and 810 minutes in the resin column. The removal efficiency of TCODcr and turbidity at the EBCT of 2.5 minutes decreased to below 70% due to an wall effect. The removal efficiency for dissolved pollutant (SCODcr) was negligible due to the insufficient contact time for adsorption. The removal of heavy metals (Cu, Zn, Pb) was mostly ascribed to the filtration of particles containing metals, since the relationship between CEC and the removal efficiency was not apparent. The result of this study would be valuable for the application of filtration device to control of urban storm runoff.

The Comparative Study on the Efficiency of Five Largest Seaports in Korea (한국 5대 항만의 효율성에 대한 비교연구)

  • Na, Ho-Su;Lee, U;Lee, Gyeong-Su
    • Journal of Korea Port Economic Association
    • /
    • v.24 no.4
    • /
    • pp.25-46
    • /
    • 2008
  • By using data envelopment analysis(DEA) this research measures the efficiency of Korea's five seaports and their Malmquist productivity from 1997 to 2006. Under the assumption of CRS(constant returns to scale) and VRS(various returns to scale), seaports' rankings of efficiency are measured. Busan port is confirmed as a best-performed port in the various measurements. Important finding facts are as follows. 1)Busan, lncheon and Ulsan seaports are efficient ports under the assumption of CRS and VRS. 2)Gwangyang port shows 4.3% lower efficiency level compared with efficient ports. 3)Pohang port shows 27.3% lower efficiency level compared with efficient ports. 4)Average total factor productivity of Korea's five ports has been lower at the rate of 3.1% during the period from 1997 to 2006. Main policy implications are 1)Busan port is more efficient than Gwangyang port, which reflects the difference of economic activities between two regional econmies. 2)During the period 1997-2006, Korea's five largest ports has experienced lower efficiency levels in the first half period because of the 1997 Korean Financial Crisis, but higher efficiency levels in the second half period because of economic recovery. In future research the more and better data will be expected to improve the understanding of Korean seaports' efficiency characteristics.

  • PDF

Analysis of Consistency and Accuracy for the Finite Difference Scheme of a Multi-Region Model Equation (다영역 모델 방정식의 유한차분계가 갖는 일관성과 정화성 분석)

  • 이덕주
    • Journal of Korea Soil Environment Society
    • /
    • v.5 no.1
    • /
    • pp.3-12
    • /
    • 2000
  • The multi-region model, to describe preferential flow, is an equation representing solute transport in soils by dividing soil into numerous pore groups and using the hydraulic properties of the soil. As the model partial differential equation (PDE) is solved numerically with finite difference methods. a modified equivalent partial differential equation(MEPDE) of the partial differential equation of the multi-region model is derived to analyze the accuracy and consistency of the solution of the model PDE and the Von Neumann method is used to analyze the stability of the finite difference scheme. The evaluation obtained from the MEPDE indicated that the finite difference scheme was found to be consistent with the model PDE and had the second order accuracy The stability analysis is performed to analyze the model PDE with the amplification ratio and the phase lag using the Von Neumann method. The amplification ratio of the finite difference scheme gave non-dissipative results with various Peclet numbers and yielded the most high values as the Peclet number was one. The phase lag showed that the frequency component of the finite difference scheme lagged the true solution. From the result of the stability analysis for the model PDE, it is analyzed that the model domain should be discretized in the range of Pe < 1.0 and Cr < 2.0 to obtain the more accurate solution.

  • PDF

R&D Efficiency Analysis Case of the Machine Tools Industry by Using DEA (DEA를 활용한 민간 기업의 R&D 효율성 분석 사례: 공작기계 A사를 중심으로)

  • Jeon, Soo-Jin;Lee, Jin-Soo;Hong, Jae-Bum
    • Journal of Technology Innovation
    • /
    • v.24 no.4
    • /
    • pp.27-53
    • /
    • 2016
  • This case analyzed the efficiency of 79 R&D projects performed within one private research center in machine tools industry. DEA was used for efficiency analysis. Input variables were R&D investment expense and man-month. Output variables were achievement rate on target development period and expected net sales within 5-years. Samples are divided into product development, Prior technology development, and control technology development. The key result is that Prior technology showed the lowest efficiency because of high uncertainty. It was so difficult to determine its goals and to make its specific plans. With respect to scale, the proportions of CRS(constant returns to scale) were 34.6%, 14.3% and 38.9% for product development, prior technology, control technology respectively. As for IRS(increase returns to scale), they were 53.8%, 85.7% and 38.9% for product development, prior technology, control technology respectively. As for DRS(decrease returns to scale) they were 11.5%, 0% and 22.2% for product development, prior technology, control technology respectively. On the whole, in this case, insufficient input was more problematic than excessive input, which means the lack of investment in R&D. Prior technology can be the source of the future competitiveness of companies. To operate inefficient DMU efficiently, the optimal input should be managed and it is derived from comparison with the reference group.

A Study on Fouling Characteristics and Applicability of Fouling Reducer in Submerged MBR Process (침지형 MBR공정에서 파울링 특성과 파울링 완화제의 적용성에 관한 연구)

  • Park, Jun Won;Park, Hong June;Kim, Min Ho;Oh, Yong Keol;Park, Chul Hwi
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.35 no.5
    • /
    • pp.371-380
    • /
    • 2013
  • Though MBR process has many advantages, the greatest risk factors in operating MBR process are occurrence of membrane fouling and decrease of flux. It is very difficult to find exact mechanism due to complex influence by many effects, although there have been recently many studies of membrane fouling. The purposes of this study are firstly evaluating bioreactor of lab-scale and micro-filtration hollow fiber membrane, secondly investigating correlation between foulants affecting membrane performance and membrane fouling, and lastly evaluating various parameters affecting fouling and applicability of membrane fouling reducer. This study found that TMP was increasing rapidly and showed 0.32 bar and the average of flux was 88 LMH. EPS concentration tends not to change much above MLSS concentration (6,000 mg/L). However, EPS concentration variation is wide below MLSS concentration (6,000 mg/L). Also, from results of membrane surface condition and element analysis using SEM/EDX, carbon and fluorine were founded to be the highest percentage in membrane because of characteristics of membrane material. In operating continuously, inorganic fouling was generated by increase of these inorganic substances such as $Al^{3+}$ and $Mg^{2+}$. Lastly, the best filtration performance was obtained for 0.03 mg MFR/mg MLSS by results of particle size, zeta potential, $SCOD_{cr}$, EPS and MLSS concentration.

제도 운영과 수학교육과 교육과정

  • Mun, Gwon-Bae
    • Communications of Mathematical Education
    • /
    • v.12
    • /
    • pp.463-477
    • /
    • 2001
  • 국가의 국가경쟁력은 학창시절 학생의 학력만큼 중요하다. 성인의 경우, 학력을 위한 노하우는 체험을 통해 터득할 수 있었다. 그러나 국가경쟁력에 관해서는 우물 안 내부관점을 벗어나기 힘들어 추진 방향과 제도 운영에 자칫 시행착오를 범하기 쉽다. 이는 사안에 대해 본질적인 접근보다 껍데기만을 쫓기 때문이었다. 이 현상을 분석하려면 관점과 보이지 않는 영역의 것들을 다룰 수 있는 수학적 사고법이 필요하며, 이 능력은 현 지식정보화 사회에서 매우 긴요하다. 그러나 현실은 여러 가지 이유로 수학적 사고법을 비롯한 기초학문을 위기로 몰아가고 있고, 안타깝지만 그 중심에 수학교육이 자리잡고 있다. 수학교육의 위기를 유발하는 요인으로 제도 운영에 관한 건이 있다. 제도 운영에서 한 변수의 변화, 예로 대입의 계열교차지원 허용 건, 교원임용고시에서 교과교육학 영역의 출제 건과 복수전공, 부전공 자격소지자에 대한 가산점 부여 건은 수학교육과 교육과정에 직, 간접적으로 영향을 미친다. 이 관계를 사범대학 수학교육과 현장의 사례를 통하여 조명하고, 그 문제점을 지적하고자 한다. 현 사범교육은 졸업이수학점 140학점 체제하에서 제 7차 교육과정에 따른 복수전공, 부전공 우대 정책을 펴고 있다. 수학교육과의 경우, 부전공 열풍이 불어 전공선택 과목이 3학년 1학기부터 폐강될 위기에 처해 있다. 교양교육의 고사 또는 전광교육이 예전보다 반으로 줄어들게 된 사범대학 실상에 비애감을 느끼게 된다. 이는 전문화된 교사 양성, 나아가 미래 국가경쟁력 향상에 심각한 저해 요소로 작용할 것이다. 복잡다단한 세상에서 최적화를 향한 개선 노력이 멈춰서는 안 된다. 현행 교원임용고시 운영상의 문제점을 공론화하고, 수학교육인의 중지를 모아야 할 긴박한 시점이다. 이를 계기로 교원임용고시의 운영개선과 수학교육과 교육과정을 한층 더 견실하게 하는 데에 이바지하고자 한다. 것이라면 후속연구로 이러한 가능성을 실험연구로 검증하고자 한다.toceros resting spores/Chaetoceroe vegetative cells도 80 cm 보다 상층에서는 높게 나타나 규조온도지수 분포와도 일치하는 경향을 보인다. 이상의 규조군집 분석 결과에 의하면, 홀로세의 후빙기동안 본 연구 지역인 동해 북동부에는 대마 난류의 유입이후 현재와 유사한 환경이 우세하게 발달했으나, 난류종 P. doliolus의 변화는 동해내에서 대마난류의 세기가 반복되었음을 지시하고 있다./3 수준으로 높다. 결론적으로 풍부한 화학물질들을 함유한 제주해류는 남해 및 동해의 생지화학적 과정들에 있어 상당히 중요함을 시사한다.다. 수조 상층수 중 Cu, Cd, As 농도는 모든 FW, SW수조에서 시간이 지남에 따라 일관성 있게 감소하였고, 제거속도는 Cu가 다른 원소에 비해 빨랐다. 제거속도는 FW 3개 수조 중 FW5&6에서 세 원소 모두 가장 느렸고, SW 3개 수조 중에서는 SW1&2에서 가장 빨랐다. SW와 FW간 제거속도 차이는 세 원소 모두 명확치 않았다 Cr은 FW에서 전반적으로 감소하는 경향을 보였지만 SW에서는 실험 초기에 감소하다 24시간 이후에는 증가 후 일정한 양상을 보였다. Pb은 FW에서 전반적으로 감소했지만 SW에서는 초기에 급격히 증가 후 다시 급격히 감소하는 양상을 보였다 Pb 또한 Cu, Cd, As와 마찬가지로 SW1&2에서 제거속도가 가장 빠르게 나타났다. FW 상층수 중 Hg는 시간에 따라 급격히 감소했고, 제거속도는 Fw5&6에서 가장 느렸다. 이러한 결과에 근거할 때 벼가 자라고 있고 이분해성 유기물이 풍부한 FW1&2, FW3&4 토양과 상층수에서는 유기물의 분해 활동이 활발하였지만, 벼가 경작되지 않는 FW5&6과 SW 에서는 유기물이 상대적으로 결핍되어 유기물의 분해활동이 적었을 것으로 판단된다

  • PDF

Effect of Antioxidative Vitamin Supplementation on Mineral Contents in the Hair and Autistic Related Behaviors in Autistic Children (자폐아동에 있어서 항산화 영양소 보충이 모발의 미네랄 함량 및 자폐성향에 미치는 영향)

  • Song, Won-Young;Hong, Jung-Hee;Park, Eun-Ju;Lee, Han-Woo;Choi, Jeong-Hwa
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.39 no.2
    • /
    • pp.237-243
    • /
    • 2010
  • This study was investigated the effect of antioxidative vitamin supplementation ($\beta$-carotene 175 mg, vitamin C 200 mg, vitamin E 33.5 mg) for 12 weeks on antioxidant status and autistic related behaviors in autistic children. The antioxidative vitamin-supplemented children had significantly lower concentrations of toxic mineral, such as cadmium (Cd), mercury (Hg) and lead (Pb) in hair, while they had higher concentration of antioxidant minerals (Se, Zn, Fe) in hair. Antioxidant vitamin supplementation for 12 weeks reduced free radical while it increased the hair levels of serotonin compared to the beginning of the study. Additionally, antioxidative vitamin supplementation resulted in significant improvement in social age. These results indicate that the consumption of antioxidative vitamin supplementation for 12 weeks in autistic children may increase plasma antioxidant mineral concentration, resulting in reduced toxic mineral and free radical and improved autistic behavior.

THREE DIMENSIONAL FINITE ELEMENT ANALYSIS OF THE EFFECTS OF ALVEOLAR BONE LOSS ON STRESS DISTRIBUTION IN POST-RECONSTRUCTED TEETH (치조골 흡수가 포오스트로 인한 치근내 응력에 미치는 영향에 관한 삼차원 유한요소법 분석)

  • Lee, Ky-Young;Chang, Ik-Tae
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.35 no.4
    • /
    • pp.674-696
    • /
    • 1997
  • There're many cases that should be reconstructed with post and core when clinical crown is destructed. But this post and core restoration may cause damaging stress on the teeth. Previous finite element study was restricted to normal bone model relatively close to cemen-toenamel junction. Moreover, the test of a model with diminished bone support was rare. The purpose of this study is to test the effects of alveolar bone loss on the magnitude, stress distribution and displacement of post reconstructed teeth. In this study, it was assumed that the coronal portion of upper incisor was severely destructed. After conventional endodontic treatment, it was restored with post and core. The PFM restoration was made on it. This crown was cemented with ZPC. Alveolar bone was classified by 4 types of bone, such as normal, 2 mm, 4 mm, 6 mm bone, according to the bone loss. Meanwhile, the material of post are divided into 2 types of materials, such as gold, co-cr. Force was applied to two directions. One was fuctional maximum bite force (300 N) applied to the spot just lingual to the incisal edge with the angle of 45 degree to the long axis of the tooth, and the other one was horizontal force (300 N) applied to the labial surface. The results analyzed with three dimensional finite element method were as follows : 1. Stress was concentrated on the adjacent dentin of the post apex, one third portion of the post apex and the labial & lingual mid-portion of the root in all case. The stress of middle third of the root was apparently concentrated on the labial aspect. 2. The stress on adjacent dentin of the post apex and one third of the post apex increased as alveolar bone height moved apically. This increase was dramatic beyond 4 mm bone loss model. 3. The stress of the post apex was spreaded to the middle third of the post and greater than gold post in the case of metal post. 4. The displacement of the neck of post was the greatest in one of the post-cement interface and this increased as alveolar bone height moved apically. Besides the displacement of the metal post is slightly lower than one of the gold post.

  • PDF

Development and application of improving techniques for watershed water cycle to adapt climate change - Lam Takhong reservoir in Thailand (기후변화 적응 유역 물순환 개선기술 개발 및 적용 - Lam Takhong Reservoir (Thailand))

  • Jang, Cheol Hee;Kim, Hyeon Jun;Cho, Jae Pil
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.395-395
    • /
    • 2018
  • 기후변화 및 토지이용변화에 따라 강우량 및 증발산량 등과 같은 물순환계 구성요소가 변화하면 유역에서의 물순환계가 영향을 받게 된다. 이렇게 변화된 유역의 물순환계를 종합적으로 관리하기 위해서는 물순환 개선 기술을 통한 지속가능하고 건전한 물순환체계의 구축이 필요하다. 유역 물순환 개선 기술은 기후변화가 진행 중에 있거나 예상되는 지역에 대하여 강우-유출수를 지연, 저류, 침투시켜 지속가능한 물순환체계를 유지 회복하도록 하는 기술이라 할 수 있다. 한국건설기술연구원에서는 기후변화 대비 수자원 적응기술 개발 연구단(CCAW, Climate Change Adaptation for Water resources)의 연구비 지원을 받아 유역 건전성 및 취약성을 평가 하고 취약한 유역에 대한 물순환 개선기술을 확보하기 위한 연구를 수행 중에 있다. 특히, 수년간 국가연구개발사업을 통해 개발되고 사업화에 성공한바 있는 유역 물순환 평가 모형인 CAT(Catchment hydrologic cycle Assessment Tool)을 수정 개선하여 수요자 중심의 활발한 현장 적용을 도모하고 있다. 본 연구에서는 개발된 유역 물순환 개선 및 평가시스템의 적용성 평가를 위하여 대상유역으로 태국의 Lam Takhong 저수지 유역을 선정하였다. Lam Takhong 저수지 유역은 유역면적은 $1,423km^2$이며 저류량은 약 $440{\times}106m^3$이다. 입력자료인 DEM, Land Cover 자료는 USGS Hydro1K (https://earthexplorer.usgs.gov/), 하천망 및 유역경계 자료는 USGS HydroSHEDS (https://hydrosheds.cr.usgs.gov/dataavail.php), 기상 및 관측 유입량, 저수지 제원 등의 자료는 APEC 기후센터의 협조를 받아 1976년부터 2016년까지의 일단위 자료를 이용하였다. 모의결과는 저수지 월별 관측 유입량과 상류 유역의 모의 유출량을 이용하여 비교-분석 하였다. Lam Takhong 저수지 상류 유역은 APEC 기후센터에서 SWAT 모형을 이용하여 저수지 유입량 분석을 수행한 바 있다. 따라서 본 연구의 결과를 SWAT 모의결과와 비교하여 그 적용성을 검증하였다. 월별 관측 유입량과 저수지 상류 유역 모의 유출량을 비교한 결과 CAT의 경우 결정계수(R2) 값이 0.86, SWAT은 0.76으로 나타나 CAT의 적용 결과가 좀 더 우수한 것으로 나타났다. 모의 결과는 매개변수 최적화 과정을 거치지 않은 결과이며 SWAT 모형과의 결과 비교를 위하여 매개변수는 동일하게 적용하였다. 향후 매개변수 최적화 모듈을 통해 검 보정 단계를 거친다면 정밀한 분석이 가능할 것으로 판단된다.

  • PDF

Market Power and Retail Price in Mobile Communications Industry: an International Comparative Study (시장지배력 수준과 요금인하 간의 관계분석: 이동통신서비스시장의 국제비교)

  • Choi, Saesol;Han, Sung-Soo
    • International Area Studies Review
    • /
    • v.18 no.3
    • /
    • pp.231-248
    • /
    • 2014
  • The relationship between market structure and social welfare outcomes has received considerable critical attention in the field of competition policy research. In particular, it is necessary to study in greater depth the impact of market power on social welfare in the telecommunications industry, which is highly likely to form a monopolistic market structure. This is because, when market powers are concentrated on few upper carriers, there are negative effects on social welfare due to an excess of profits. Against this background, the present study investigates the relationship between the market structure of the mobile communications industry (the level of market power) and social welfare outcomes (the retail rate cut) through an international comparison. The results demonstrate that both the market structure and competition status of the Korean market have had significant gaps in global trends. It also points out that the monopolistic market structure (when the leading provider has more than 50% of the market share) has significantly negative effects on consumer welfare (the retail price cut). In addition, the findings of this study suggest that the direction of competition policy should focus on not only improving market concentration(HHI), but also on mitigating the monopoly of power of a dominant operator.