• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.27-33
• /
• 2008

In this paper, we propose a cognitive beamforming scheme for coexistence of CR (Cognitive Radio) and IR (Incumbent Radio) systems. In order to maintain the priority of the IR in spectrum utilization the proposed cognitive beamforming scheme needs to have the CR not cause any interference to the IR systems occupying the same frequency band at the same time. In addition the proposed scheme has to provide maximum channel gain to the CRU (CR User) in a boundary of satisfying the former criterion. For this purpose, the proposed scheme does not cause any interference to the IRU (IR User), while the CRU is served without additional radio resource consumption. From simulation, we confirmed that when using the proposed scheme the CRU does not interfere with the IRU and there is little bit error rate performance degradation of the CRU as compared to that of the ideal beamforming system, which does not consider the IR priority.

• Analytical Science and Technology
• /
• v.6 no.2
• /
• pp.217-223
• /
• 1993

Thin films of the Au/Cr, Au/Ni/Cr and Au/Pd/Cr systems were deposited on alumina substrates at ambient temperature and $250^{\circ}C$ in a high-vacuum resistance heating evaporator and annealed at $300^{\circ}C$, $450^{\circ}C$ and $600^{\circ}C$ for 1 hour in air, respectively. The film thicknesses of Au, Ni(or pd), and Cr were $1000{\AA}$, $300{\AA}$, and $50{\AA}$, respectively. The substrate temperature during deposition and the post-deposition annealing temperature affected the sheet resistance of thin-films due to the inter-diffusion of each layer. As a result of Auger depth profile analysis, in the Au/Cr system Cr already diffused out to Au surface during deposition at the substrate temperature of $250^{\circ}C$ and Au distribution changed after heat treatment. In the Au/Ni/Cr and Au/Pd/Cr systems, diffusion phenomena of Ni and Pd were found and especially Ni (approximately 45 at.%) diffused out to Au surface and oxidized.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.205-207
• /
• 2009

아크이온플래이팅 기술과 스퍼터링 기술이 결합된 하이브리드 코팅 시스템을 이용하여 STS 304와 Si 기판에 4성분계 Cr-Al-Mo-N 코팅을 증착하였다. $N_2$/Ar 혼합가스 분위기하에 아크 타겟은 Cr을 사용하였고 스퍼터링 타겟은 Al과 Mo를 사용하였으며 합성된 Cr-Al-Mo-N 코팅은 주로 치환고용된 (Cr, Al, Mo)N으로 구성되었다. 최고 경도값은 Mo 함량이 24.2 at.%일 때 35 GPa을 나타냈으며 마찰계수는 Mo의 함량이 0에서 33.2 at.%로 증가함에 따라 0.9에서 0.48로 감소하였다. 이는 $MoO_3$가 코팅면과 스틸볼 계면에서 고체 윤활제로 작용한 것으로 사료된다. 그러나 Cr-Al-Mo-N 코팅은 MoN의 낮은 내산화온도로 인하여 Cr-Al-N에 비하여 더 낮은 온도에서 산화되었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.130-131
• /
• 2007

초고경도 박막을 얻기 위해 질화물을 이용한 CrN / CrAlN 초격자 박막을 CFUBM 시스템을 통해 합성하였다. 초격자 박막의 각층의 두께 (${\lambda}$)는 기판의 회전 속도를 이용하여 제어하여 4.4 에서 44.1 nm 까지 합성하였다. 박막의 결정구조 및 미세구조를 분석하기 위하여 고분해능 X선 회절 분석기 (HR-XRD)를 이용하였으며, 박막의 기계적 성질은 나노 인덴터와 ball on disk tester를 통해 분석하였다. CrN / CrAlN 초격자 박막은 각층의 두께 (${\lambda}$)에 따라 28.77 GPa에서 31.97 GPa의 경도 값을 나타내었으며, 미세구조와 기계적 특성이 변화를 관찰할 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.454-462
• /
• 2011

A study on the adsorption characteristics of Pb(II) and Cr(III) cations onto C-methylcalix[4]resorcinarene (CMCR) has been conducted. CMCR was produced by one step synthesis from resorcinol, acetaldehyde, and HCl. Most parameters in batch system confirm that CMCR is a good adsorbent for Pb(II) and Cr(III). Cr(III) uptake was bigger than that of Pb(II), but Cr(III) adsorption rate was slower than Pb(II). The adsorption kinetic of Pb(II) and Cr(III) adsorptions in batch followed pseudo $2^{nd}$ order kinetics model, but the kinetic of Pb(II) adsorption in fixed bed column system followed first order model. Desorption studies to recover the adsorbed Pb(II) was performed sequentially with distilled water and HCl, and the results showed that the adsorption was dominated by chemisorption.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.113-119
• /
• 2010

Wireless ad hoc network composed of low power devices has been operated in ISM bands. However, with the growing proliferation of wireless services, these bands are increasingly getting congested. In order to relieve the spectrum scarcity and inefficient spectrum utilization, ad ho cognitive radio was proposed. In this paper we propose the efficient spectrum sensing method to reduce power consumption and detect white space in ad hoc cognitive radio system. The wireless channel between a licensed user and CR systems is modeled as Gaussian channel, the distance between a licensed user and CR systems is assumed differently. Also, the wireless channel among CR systems is assumed as the perfect channel and the distance among CR systems is assumed close distance. CR systems sense the spectrum of the licensed user by using a energy detection method. From the simulation results, spectrum sensing performance of combining sensing result of CR systems with high received energy shows higher than combining sensing result of all CR systems and we can refer to the proposed sensing method in order to perform effective spectrum sensing with low power consumption.

• Journal of Korea Foundry Society
• /
• v.41 no.5
• /
• pp.445-453
• /
• 2021

Computational thermodynamics for various alloy systems is well known as the CALPHAD technique. Gibbs energy model parameters for each phase are obtained from experimentally measured thermodynamic properties and are mainly used to predict areas not experimentally measured and to analyze experimental results thermodynamically. In this study, the thermodynamic modeling of the Ni-Cr-Nb-C quaternary system is conducted for a thermodynamic analysis of the phenomena by which heat-resistant cast alloys (IN-657) are destroyed in certain areas after long-term use. The stable phases in the system according to the Cr content, phase fraction depending on the temperature, and long-range ordering parameters for the Ni₂Cr phase are calculated and compared to results obtained experimentally. The calculated thermodynamic properties suitably explain the experimentally reported fracture temperature range and the results of stable phases formed in the fractured areas. Thermodynamic modeling through the CALPHD method is expected to be useful for analyzing and predicting the thermodynamic behaviors of various cast alloys.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1306-1309
• /
• 2007

본 논문에서는 indoor 환경에서 CR 네트워크를 이용하기 위한 방안으로 CR-Wi-Fi device 시스템을 제안했으며 IU 을 보호하는 방법으로 CR beaconing 을 제안했다. IU 가 출현하면 UHF, VHF band 와 ISM band 로 동시에 이를 알리고 CR 네트워크가 간섭을 주는 경우 사용 중이던 채널 사용을 중지 혹은 이동하도록 명령해야 한다. 본 논문에서는 CR beaconing 방식을 제안하여 보다 효과적인 IU 보호 및 복구를 수행하도록 하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.184-185
• /
• 2009

하이브리드 코팅 시스템을 이용하여 CrN 을 기초로 3성분계 코팅을 합성한다. 이번 연구는 C를 첨가한 음이온 고용경화와 Mo를 첨가한 양이온 고용경화의 영향이 미세구조와 기계적 성질에 미치는 영향을 알아보는 것이다. Cr-C-N 과 Cr-Mo-N 코팅은 23, 43GPa의 최대 경도 값을 가진다. 이 경도강화는 고용강화로 설명할 수 있다.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.27-31
• /
• 2010

Recently, spectrum requirements are rapidly increasing in accordance with wireless communication development. For this reason, FCC(Federal communications commission) is considering cognitive radio system to increase spectral efficiency. In this paper, we present the performance analysis of signal detection by using RS(Reference signal) for LTE environments. Especially, we analyze the performance of detection probability in case of downlink LTE system. In the simulation, we generate OFDMA signal format which is specified in the LTE system. We assume additive white Gausssian noise channel environment. We estimate the performance by setting the threshold value of 5 % and 10 % based on CFAR(Constant false alarm rate) and false alarm rate, respectively. Finally, we discuss a future study plan on the applicability of CR to the LTE system.