• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.457-460
• /
• 1995

A new hollow fiber filled with the lower refractive index liquid as core constructs a liquid core optical fiber(LCOF). The LCOF have been used as colorimetric cell to determine elements Cr and Cu in the presence of 70%- 50% ethanol or 50% dioxane aqueous solution, based on colored complex of Chromium(VI) with Diphenycarbazid(DPC) and copper with Chromaurd S(CAS) respectively. The sensitivity (1/ng/ml) of calibration curve of Cr and Cu are 0.052, 0.017 over the range 0 - 25, 0 - 24(ng/ml) respectively. The Cr in the animal gum and Nation Standard of China are determined with recoveries of 94 - 102%.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1159-1164
• /
• 2000

페롭스카이트 구조를 갖는 E $r_{1-x}$S $r_{x}$Cr $O_{3-y}$ 계에서 x=0.0, 0.05, 0.1, 0.2인 비화학양론적 화합물 고용체를 1573 K 대기압 하에서 제조하였다. X-선 회절분석을 통하여 제조된 모든 계들이 등방정계 단일상을 형성하였고, 또한 반지름이 큰 S $r^{2+}$를 doping 시켜줌에 따라 격자상수 및 환산부피가 증가됨을 알 수 있었으며, 단위 세포의 부피는 직선성을 보이며 증가하였다. TG-DTA에 따른 열분석 결과 Sr이 치환되지 않은 계에서는 상전이가 발생하는 반면, x값이 0.05 이상인 계들은 고온영역에 이르기까지 등방정계에서 마름모정계로의 상전이가 억제되었다. 전자현미경을 통하여 치환된 Sr의 몰비에 따른 시료들이 미세구조를 관찰하였고, d.c 전도도 측정을 통하여 다결정성 시료계들이 가지는 전도도의 온도 의존성으로부터 구한 활성화 에너지는 0.17 eV였다.다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.47-47
• /
• 2008

Cr and AlSi (Si=20 and 66 at.%) target들을 이용하여 Closed-field unbalanced magnetron sputtering (CFUBMS)으로 증착된 주기($\Lambda$)가 2.3 nm에서 8.0nm인 CrN/AlSiN multilayer coatings의 crystal structure, 화학적 조성, 및 기계적 특성을 glow discharge optical emission spectroscopy (GDOES), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS) and nano-indenter 등의 분석장비를 이용하여 분석하였다. 고온안정성을 시험하기 위하여 $800^{\circ}C$와 $1000^{\circ}C$ 공기중 에서 30분 열처리하였다. CrN/AlSiN multilayer coatings의 고온안정성은 Si조성이 증가함에 따라 향상되었다. Si이 18.2 at.%함유된 coating이 가장 우수한 고온안정성을 갖고 있다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.41-41
• /
• 2007

타겟-모재간 거리를 변수로 하여 마그네트론 스퍼터링법에 의해 CrN 박막을 합성하고 미세구조 및 물성을 평가하였다. 타겟-모재간 거리 85mm 및 180mm에서 CrN 박막을 합성하였으며, 합성된 코팅막의 내식 특성을 평가하기 위해 양극분극시험을 수행하였다. 타겟-모재간 거리 변화에 따른 미세구조 변화를 관찰하기 위해 주사전자현미경을 이용하여 박막의 파단면 조직을 관찰하였으며, XRD 분석을 통해 상천이 거동을 관찰하고 이를 물성 결과와 비교 분석하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.192-192
• /
• 2012

플라즈마 CVD와 아크방전법을 혼합한 하이브리드 공정을 통하여 알곤과 메탄 그리고 질소를 인입하여 Cr을 타겟으로한 아크방전과 기판에 전극을 인가하는 방식의 플라즈마 CVD공정을 복합화하여 금속이 함유된 Cr-C:H 박막을 합성하고, 공정에 질소를 인입하여 박막에 질소를 도핑하여 부내식성과 전기적 전도성에 관한 고찰을 하였다. 내부식성은 동전위분극시험에서 $1{\mu}A/cm^2$을 보였고, 전기저항은 $1m{\Omega}-cm$ 이하로 측정되어 내식성과 전기전도성을 동시에 갖는 박막을 합성할 수 있었다. 내식성과 전기전도성에 대한 원인규명을 위하여 박막의 구조분석을 XPS, XRD, Raman 분석을 통하여 실시하였다. 흑연화 탄소(Graphitic carbon)와 금속콤포짓(Metal composite)은 내식성에 영향을 주었으며, 전도성물질의 percolation효과와 질소와 탄소의 단일 결합과정에서 생성되는 잉여전자에 의한 단일 결합(C-N) 분율이 전기전도성에 영향을 주었다.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.489-492
• /
• 2000

Three different white cast irons alloyed with Cr and Si were prepared in order to study their distribution be-havior in matrices and carbides. The specimens were produced using a 15kg-capacity high frequency induction fur-nace. Melts were super-heated to $1600^{\circ}C$, and poured at $1550^{\circ}C$ into a pepset mold. Three combinations of the alloys were selected so as to observe the distribution behavior of Cr and Si : 0.5%C-25.0%Cr-1.0%Si(alloy No. 1), 0.5%C-5.0%Cr-1.0%Si(alloy No. 2) and 2.0%C-5.0%Cr-1.0%Si(alloy No. 3). Cellular $M_7C_3$ carbides-$\delta$ferrite eutectic were developed at $\delta$ferrite liquid interfaces in the alloy No. 1 while only traces of $M_7C_3$ carbides-$\delta$ferrite eutectic were precipitated in the alloy No. 2. With the addition of 2.0% C and 5.0% Cr, ledeburitic $M_3C$ carbides instead of cellular $M_7C_3$ carbides were precipitated in the alloy No. 3. Cr was distributed preferentially to the $M_7C_3$ carbides rather than to the matrix structure while more Si was partitioned in the matrix structure rather than the $M_7C_3$ carbides. $K^m$ for Cr was ranged from 0.56 to 0.68 while that for Si was from 1.12 to 1.28. $K^m$ for Cr had a lower value with increased carbon contents. The mass percent of Cr was higher in the $M_7C_3$ carbides with increased Cr contents.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.374-379
• /
• 1998

$Mn_1-xCr_xPt_3$ alloy films have been prepared by depositing (Mn, Cr)/Pt multilayers using a rf magnetron sputterer followed by heat treatment. Small and wide angle x-ray diffractometry, magnetic hysteresis loops and Kerr rotation angle spectra of the films have been measured and used to investigate structural, magnetic and magneto-optic properties of the films. The films had a crystal structure of ordered AuCu$_3$ type and the strong preferred orientation of a (111)plane parallel to the film surface. The saturation magnetization of the films was decreased with Cr content reaching almost zero near x=0.58 and then increased for further increasement of Cr content up to x=0.77 over that stayed almost constant. This indicated that Cr atoms were antiferromagnetically coupled with Mn atoms. The magnetic easy axis of MnPt$_3$(x=0) film was parallel to the film surface but those of the films with x$\geq$0.58 increased as Cr content increased reaching about 4 kOe at x=1(CrPt$_3$). The dependence of the Kerr rotation angle on the Cr content was similar to that of the saturation magnetization on the Cr content. The films with x=0.77 and x=1 showed the larger Kerr rotation angle at the wavelengths of near infrared compared to the magneto-optic recording medium, TbFeCo, currently being used.

• Journal of Korea Soil Environment Society
• /
• v.3 no.1
• /
• pp.45-54
• /
• 1998

The riverbed structures and heavy metal concentrations of the sediments in the Naktong River, Western Naktong River, and Suyoung Stream were investigated, and then the correlationships between heavy metals were examined. Naktong River was the deepest among the three streams. The deepest and the shallowest sites were site 11(11.58m) and 9(3.35m) in Naktong River, site 7(6.25m) and 4(2.06m) in Western Naktong River, add site 8(2.89m) and 1(0.61m) in Suyoung Stream, respectively. The mean concentration of Cd(45.79ppm) was higher in the sediment of Western Naktong River than in other two streams and those of Pb(76.25ppm), Cr(48.13ppm), and Cu(77.50ppm) were higher in the sediment of Suyovng Stream than in other two streams. The analytical results for correlationships between heavy metals showed that Cu was highly correlated with Cr and Pb was very highly correlated with Cr and Cu in Naktong River. Cu was relatively highly correlated with Cd and Cr and Cr was highly correlated with Pb in Western Naktong River Cd was relatively higlky correlated with Pb and Cu and Cr and Cd, Pb, Cu and Pb, Cr were highly correlated in Suyoung Stream.

• Journal of Digital Convergence
• /
• v.18 no.6
• /
• pp.65-79
• /
• 2020

With the rapid development of China's economy, the aviation industry, as an important part of transportation services, has undoubtedly achieved rapid development. However, there is hardly any academic work that was based on the development of the top airlines in the Chinese airline industry. Hence, this study provides empirical research that takes into account the longitudinal development of the top 20 airlines in China from 2009 to 2018. The throughput volumes (cargo and passenger) of the airlines were analyzed by concentration indicators, namely the concentration ratio (CR), the Herfindahl- Hirschman index (HHI), the Gini coefficient, and the shift-share analysis (SSA). In this paper, the top 20 airlines have been analyzed in terms of the passenger and cargo throughput from 2009 to 2018. The calculation results of CR6, HHI and the Gini coefficient show that the airlines were extremely deconcentrated. In addition, by comparing the ABSGR of passenger and cargo throughput, it is shown that China's aviation industry is dominated by four airlines- Air China, China Eastern Airlines, China Southern Airlines and Hainan Airlines. In the future study, it is necessary to explore growth strategies to find niche markets for passenger and cargo transportation.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.2
• /
• pp.68-74
• /
• 2015

To compare the microstructure and electrochemical properties between two binary alloys (Cr-Si, Ni-Si), two composition of binary alloys with the same capacity were selected using phase-diagram and prepared by matrix-stabilization method to suppress the volume expansion of Si by inactive-matrix. Master alloys were made by Arc-melting followed by fine structured ribbon sample preparation by Rapid Solidification Process (RSP, Melt-spinning method) under the same conditions. Also powder samples were produced by wet grinding for X-Ray Diffraction (XRD) and electrochemical measurements. As predicted from the phase diagram, only active-Si and inactive-matrix ($CrSi_2$, $NiSi_2$) were detected. The results of Scanning Electron Microscope (SEM) and Transmission Electron Microscopy - Energy Dispersive X-ray Spectroscopy (TEM-EDS) show that Cr-Si alloy has finer microstructure than Ni-Si alloy, which was also predictable through phase diagram. The electrochemical properties related to microstructure were evaluated by coin type full- and half-cells. Separately, self-designed test-cells were used to measure the volume expansion of Si during reaction. Volume expansion of Cr-Si alloy electrode with finer microstructure was suppressed significantly and improved in cycle capability, in comparison Ni-Si alloy with coarse microstructure. From these, we could infer the correlation of microstructure, volume expansion and electrochemical degradation and these properties might be predicted by phase diagram.