• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1003-1008
• /
• 2017

In this paper, we studied the design and fabrication of double T Structure with CPW antenna at around 5 GHz band.. To improve of frequency properties of antenna, Double T Structure with CPW antenna was simulated by HFSS(: High Frequency Structure Simulator). A double T Structure with CPW antenna was designed and fabricated by photolithograph on an FR4 substrate (dielectric constant of 4.4 and thickness of 1.6 mm). The fabricated A double T Structure with CPW antenna showed a center frequency, the minimum return loss and impedance were 5.29GHz, -34dB, and 390MHz, $49.6{\Omega}$ respectively.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.11-15
• /
• 2002

In this paper, we have proposed the new configuration of wideband antenna using CPW fred lines. The proposed antenna has CPW feed lines and U-slot to achieve wade bandwidth with good impedance matching. The use of CPW feed line can decrease the number of substrates. It is compared with the conventional antenna find by a microstrip fled line. The parameters of CPW fred lines were studied by using the quasi-static approximation which is based on the conformal mapping method. The analysis of CPW discontinuities such as the tapered-step structure and the open ended gap were studied by using the quasi-static approximation which is based on the boundary element method. Also, the equivalent circuit model of multi-layer antenna were proposed using the cavity model. Experiment results of the proposed antenna 7how wide-bandwidth characteristics and good radiation patterns in passband.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.207-211
• /
• 2015

In this paper, we proposed a broadband planar Yagi-Uda dipole antenna with dual tapered balance and unblance (balun) by CPW-fed to CPS. This antenna consisted of driver, three directors, dual tapered balun and CPS-fed to CPS. The fed structure of CPW-fed to CPS had a benefit points much simpler than other planar Yagi-Uda antennas and provided design more flexibility in arranging the reflector. The proposed antenna is introduced dual tapered balun to improve the impedance matching. It balun is inserted between the CPW-ground and the CPS. The proposed antenna is exhibited the bandwidth of 4.78 GHz (1.94~6.72 GHz) (S11 < -10 dB) and the gain of 4.9~7.2 dBi within that bandwidth. This antenna will applicate wireless communication.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.900-902
• /
• 2013

In this paper, we propose the CPW antenna with three folded lines for miniaturization. This antenna is consisted of a meander-line on the middle position for LTE band and two folded lines. As widths of three lines are gradually changed to broaden bandwidth, antenna is designed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.535-540
• /
• 2004

In this paper, We proposed a rectangular slot antenna with CPW feeder. Slot antennas fed by CPW are attractive due to the simple fabrication simplicity and ease of integration with active devices. This antenna consists of two parts, inner patch and outer patch to realize wide-band antenna by multi-frequency. Also, We fabricated a proposed rectangular slot antenna, confirm characteristics of multi-frequency by tuning antenna parameters, inner antenna's location and size. The experimental results show that each resonant frequency of a fabricated antenna is measured at almost 1, 9GHz, 2.8GHz, 3, 5GHz, 4, 9GHz. In radiation patterns each resonant frequency, radiation pattern 4-th resonant frequency is the same ad that of TM11 in patch antenna. Therefore, the experimental and theoretical results shows that a proposal rectangular slot antenna have triple resonant frequencies.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.356-361
• /
• 2024

This paper deals with the design and fabrication of a coplanar waveguide (CPW)-fed super-wideband semicircular-disk-shaped dipole antenna operating in a frequency band of 2.4 GHz or higher. To feed the antenna, a CPW feed line was appended to the center of the lower arm of the semicircular-disk-shaped dipole antenna. For miniaturization, square patches were added to the ends of the two arms of the semicircular-disk-shaped dipole, whereas the slot width of the CPW feed line at the center of the dipole antenna was increased to improve impedance matching in the 5.4-6.3 GHz band. The simulated frequency band of the proposed antenna for a voltage standing wave ratio (VSWR) less than 2 was 2.369-30 GHz(170.7%), whereas the fabricated antenna was maintained VSWR less than 2 in the frequency range of 2.378-20 GHz when measured using a network analyzer operating up to 20 GHz so it can be applied as a super-wideband antenna for next-generation mobile communications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2016

In this paper, the compact CPW-fed slot antenna for WLAN applications is proposed. While the proposed antenna with size of only $20{\times}18{\times}1mm^3$ is consisted of double stub and folded slot, the antenna for 2.4 GHz band and 5 GHz band is designed and fabricated with optimized parameters obtained by simulation. Proposed antenna is fabricated with FR-4 substrate to the thickness of 1.0 mm. By obtaining the measured return loss level of < -10 dB at dual-band, we showed that it is operated as antenna for WLAN applications, and then it is also expected to be usable as antenna for RFID.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1518-1523
• /
• 2018

A method for designing a DDQYA fed by a CPW is proposed in this paper. The proposed CPW-fed DDQYA consists of two series-connected strip dipoles, a ground reflector, and a strip-pair director. Instead of the conventional microstrip feed line in which the signal line is located on the substrate opposite to the antenna, a CPW is used because CPW is located on the same side with the antenna, and so the fabrication is easy. The strip-pair director is composed of two horizontally-separated strips, and it is added above the second dipole to enhance the gain in the high frequency region. A prototype of the proposed CPW-fed DDQYA is fabricated on an FR4 substrate. The fabricated antenna has a frequency band of 1.66-3.38 GHz(68.3%) for a voltage standing wave ratio < 2, and measured gain ranges 5.0-7.3 dBi over a frequency band of 1.60-2.90 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.73-78
• /
• 2007

In this paper, the CPW-fed triple-band internal planar monopole antenna which simultaneously meets the three bands such as Cellular, PCS and Wibro is designed. The size of the radiation elements can be reduced to about $\lambda/4$ by designing the CPW-fed monopole antenna and then we can miniaturize the antenna size by meandering the radiation elements. In addition, we design the planar antenna for the slim-type mobile phone. We can obtain the desired antenna properties by controlling the length of each radiation elements. The measured return loss of the antenna is less than -7 dB at the desired bandwidth. And the measured radiation patterns are similar to that of the monopole antenna. The designed antenna has the gains -5.2 dBi. -2 dBi, -0.4 dBi at each resonant frequencies respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.212-216
• /
• 2004

In this paper, a new design for a Coplanar Waveguide(CPW) fed wide-band slot antenna is presented. To enhance the impedance bandwidth of the slot antenna, we proposed the tapering slot structure. A various resonance modes are generated in the tapering slot. The measured impedance bandwidth of the proposed antenna is about 13:1(2.0 GHz∼25.9 GHz) with VSWR$\leq$2. Simulation and measurement results for return loss and radiation pattern are presented.