• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1003-1008
• /
• 2017

In this paper, we studied the design and fabrication of double T Structure with CPW antenna at around 5 GHz band.. To improve of frequency properties of antenna, Double T Structure with CPW antenna was simulated by HFSS(: High Frequency Structure Simulator). A double T Structure with CPW antenna was designed and fabricated by photolithograph on an FR4 substrate (dielectric constant of 4.4 and thickness of 1.6 mm). The fabricated A double T Structure with CPW antenna showed a center frequency, the minimum return loss and impedance were 5.29GHz, -34dB, and 390MHz, $49.6{\Omega}$ respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.535-540
• /
• 2004

In this paper, We proposed a rectangular slot antenna with CPW feeder. Slot antennas fed by CPW are attractive due to the simple fabrication simplicity and ease of integration with active devices. This antenna consists of two parts, inner patch and outer patch to realize wide-band antenna by multi-frequency. Also, We fabricated a proposed rectangular slot antenna, confirm characteristics of multi-frequency by tuning antenna parameters, inner antenna's location and size. The experimental results show that each resonant frequency of a fabricated antenna is measured at almost 1, 9GHz, 2.8GHz, 3, 5GHz, 4, 9GHz. In radiation patterns each resonant frequency, radiation pattern 4-th resonant frequency is the same ad that of TM11 in patch antenna. Therefore, the experimental and theoretical results shows that a proposal rectangular slot antenna have triple resonant frequencies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.368-373
• /
• 2006

In this paper, a CPW fed rectangular slot antenna loaded with two slots for dual band operation is presented. This antenna operates at about 2.1GHz and 3.3GHz with the broad bandwidth at these frequencies. a CPW inset structure is used to match the antenna at the two seperated frequencies. Some prototypes of the proposed dual frequency antenna have been implemented. Experimental results are presented and discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1518-1523
• /
• 2018

A method for designing a DDQYA fed by a CPW is proposed in this paper. The proposed CPW-fed DDQYA consists of two series-connected strip dipoles, a ground reflector, and a strip-pair director. Instead of the conventional microstrip feed line in which the signal line is located on the substrate opposite to the antenna, a CPW is used because CPW is located on the same side with the antenna, and so the fabrication is easy. The strip-pair director is composed of two horizontally-separated strips, and it is added above the second dipole to enhance the gain in the high frequency region. A prototype of the proposed CPW-fed DDQYA is fabricated on an FR4 substrate. The fabricated antenna has a frequency band of 1.66-3.38 GHz(68.3%) for a voltage standing wave ratio < 2, and measured gain ranges 5.0-7.3 dBi over a frequency band of 1.60-2.90 GHz.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.347-351
• /
• 2008

In this paper, a new co-planar waveguide ultra-wideband aperture is designed as wireless application in ships. The designed antenna consists of a rectangular aperture on a determined ground plane and a mushroom shaped stub. The mushroom-shaped stub, which is simple, convenient to analyze and optimise, has less parameters. This antenna has compact aperture size $21.1{\times}8.1mm^2$, designed on FR-4 substrate with dielectric constant of 4.3, thickness of 1.5mm. CPW fed planar antenna has the advantages of wide-bandwidth, low-cost and easy interaction with the radio frequency front end circuitry.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.212-216
• /
• 2004

In this paper, a new design for a Coplanar Waveguide(CPW) fed wide-band slot antenna is presented. To enhance the impedance bandwidth of the slot antenna, we proposed the tapering slot structure. A various resonance modes are generated in the tapering slot. The measured impedance bandwidth of the proposed antenna is about 13:1(2.0 GHz∼25.9 GHz) with VSWR$\leq$2. Simulation and measurement results for return loss and radiation pattern are presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.267-272
• /
• 1999

In general, printed antennas have a narrow bandwidth characteristic and many people want to find out the method of bandwidth improvement through complicated procedures. So we want to reform the conventional printed antenna characteristic by using the folded dipole's superiority to unit dipole. But it is hard to feed the printed folded dipole antenna, we use the CPW, which is widely used in microwave IC or MMIC applications and have many advantages to the conventional microstrip line, to feed the printed folded slot antenna. It is confirmed that the improvement in the bandwidth characteristic of CPW fed folded slot antenna, as much as 20%, through the measurement of designed and implemented antenna.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1492-1497
• /
• 2017

In this paper, a design method for a CPW-fed wideband loop antenna for indoor digital TV applications is studied. The proposed loop antenna consists of a square loop and two circular sectors which connect the loop with central feed points, and the CPW feed line is inserted in the lower circular sector. The CPW feed line is designed to match with the 75 ohm port impedance for DTV applications, and the ground slots are etched in order to improve the impedance matching in the middle frequency region. The effects of the gap between the circular sectors and the location and dimension of the ground slots on the input reflection coefficient and gain characteristics are examined to obtain the optimal design parameters. The optimized antenna is fabricated on FR4 substrate, and the experiment results show that it operates in the frequency band of 463-1,280 MHz for a VSWR < 2, which assures the operation in the DTV band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2016

In this paper, the compact CPW-fed slot antenna for WLAN applications is proposed. While the proposed antenna with size of only $20{\times}18{\times}1mm^3$ is consisted of double stub and folded slot, the antenna for 2.4 GHz band and 5 GHz band is designed and fabricated with optimized parameters obtained by simulation. Proposed antenna is fabricated with FR-4 substrate to the thickness of 1.0 mm. By obtaining the measured return loss level of < -10 dB at dual-band, we showed that it is operated as antenna for WLAN applications, and then it is also expected to be usable as antenna for RFID.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.303-307
• /
• 2008

In this paper, a new co-planar waveguide ultra-wideband aperture is designed. The designed antenna consists of a rectangular aperture on a determined ground plane and a mushroom shaped stub. The mushroom-shaped stub, which is simple, convenient to analyze and optimise, has less parameter. This antenna has compact aperture size $21.1{\times}8.1mm^2$, designed on FR-4 substrate with dielectric constant of 4.3, thickness of l.5mm. CPW fed planar antenna has the advantages of wide-bandwidth, low-cost and easy interaction with the radio frequency front end circuitry.