• The KIPS Transactions:PartC
• /
• v.8C no.2
• /
• pp.182-188
• /
• 2001

이동 호스트에서 기지국으로의 데이터 전송 시 예상치 못한 기지국 전체 고장은 필연적으로 버퍼에 있는 데이터의 손실을 초래하고 적절한 손실 보상이 필요하다. 기지국의 고장시의 회복을 위한 기존의 기법들은 오버헤드가 많고 단순히 무선 링크 장애만을 고려하므로 기지 국 전체 고장에는 적합하지 않다. 유무선망 전체의 신뢰성 있는 전송을 위한 End to End 전송 방식도 비효율적으로 이동 호스트가 보상할 데이터 량을 알기 위해 필요한 기지국 버 퍼의 정확한 손실 정도를 알기 어렵다. 본 논문에서는 기존에 제안된 기법들의 문제점을 분 석하고 무선 ATM망에서 기지국 고장 시에 효율적으로 손실 보상을 하도록 하는 기법으로 CPS(Checkpoint Scheme)을 제안한다. CPS는 기지국이 버퍼의 출력 정보를 통보하여 고장 시에 이동 호스트가 seamless한 전송을 할 수 있도록 한다. 기존의 기법들과 시뮬레이션 및 비교 분석을 통하여 CPS의 효율을 증명한다.

• Tribology and Lubricants
• /
• v.25 no.1
• /
• pp.66-72
• /
• 2009

Al-based composites reinforced with SiC particulate were fabricated using a thermal spray process, and dry sliding wear behavior of the composites was investigated. Pre-mixed Al and SiC powders were sprayed on an A16061 substrate by flame spraying, and dry sliding wear test were performed under various sliding speed and applied load conditions against ${Al_2}{O_3}$ ball. Wear behavior of the composites was studied by using scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). And build-up mechanism of MML on the worn surface of the composites was examined. It was revealed that these MML was formed of debris from the contact surface of the composites and effected to wear behavior of the composites protecting the contact surface of the composites.

• Journal of Technologic Dentistry
• /
• v.30 no.1
• /
• pp.25-31
• /
• 2008

Cp-Ti and Ti-6Al-4V alloys commonly used dental implant materials, particularly for orthopaedic and osteosynthesis because of its suitable mechanical properties and excellent biocompatibility. This alloys have excellent corrosion behavior in the clinical environment. The first factor to decide the success of dental implantation is sufficient osseointegration and high corrosion resistance between on implant fixture and its surrounding bone tissue. In this study, in order to increase corrosion resistance and biocompatibility of Cp-Ti and Ti-6Al-4V alloy that surface of manufactured alloy was coated with TiN by RF-magnetron sputtering method. The electrochemical behavior of TiN coated Cp-Ti and Ti-6Al-4V alloy were investigated using potentiodynamic (EG&G Co, PARSTAT 2273. USA) and potentiostatic test (250mV) in 0.9% NaCl solution at 36.5 $\pm$ 1$^{\circ}C$. These results are as follows : 1. From the microstructure analysis, Cp-Ti showed the acicular structure of $\alpha$-phase and Ti-6Al-4V showed the micro-acicular structure of ${\alpha}+{\beta}$ phase. 2. From the potentiodynamic test, Ecorr value of Cp-Ti and Ti-6Al-4V alloys showed -702.48mV and -319.87mV, respectively. Ti-6Al-4V alloy value was higher than Cp-Ti alloy. 3. From the analysis of TiN and coated layer, TIN coated surface showed columnar structure with 800 nm thickness. 4. The corrosion resistance of TiN coated Cp-Ti and Ti-6Al-4V alloys were higher than those of the non-coated Ti alloys in 0.9% NaCl solution from potentiodynamic test, indicating better protective effect. 5. The passivation current density of TiN coated Cp-Ti and Ti-6Al-4V alloys were smaller than that of the noncoated implant fixture in 0.9% NaCl solution, indicating the good protective effect resulting from more compact and homogeneous layer formation.

• The Plant Pathology Journal
• /
• v.20 no.2
• /
• pp.131-134
• /
• 2004

A strain of Cucumber mosaic virus (CMV) was isolated from a weed, water chickweed (Stellaria aquatica), growing in the pepper field in Chunchon, Korea. This isolate, CMV-Sa, was differentiated from other CMVs based on biological properties and nucleotide sequence analysis of the coat protein (CP) gene. CMV-Sa showed different reactions to all the tested plants, except Capsicum annuum and Cucumis sativus, when compar-ed with those of CMV-Mf (subgroup I) and CMV-PaFM (subgroup II). Remarkably, in Nicotiana tabacum cvs. Samsun, Xanthi-nc and Ky-57, CMV-Sa induced local necrotic ring spots on the inoculated leaves and venal wave pattern and mosaic on the upper leaves. RNA analysis, serology, and RT-PCR of CP gene showed that CMV-Sa belonged to subgroup I of CMV. However, restriction enzyme analysis of the cDNA using AluI, HhaI, HincII, HindIII, HinfI and MspI showed that CMV-Sa was distinct from that of CMV-Mf. Based on comparison of the nucleotide of CP gene and deduced amino acid sequences between other CMV strains, CMV-Sa was closely related to CMV-Mf with 93.7% and 97.2 % identity, respectively.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2002.11a
• /
• pp.103-105
• /
• 2002

This study was conducted to determine how broiler performance with the level of crude protein(23 CP%, 21 CP% and 19 CP%) can be changed and affected, adding Alum(Al$_{2}$(SO$_{4}$)$_{3}$ㆍ14H$_{2}$O) and no Alum in litter(two ALUM levels and 3 Protein levels with 2$\times$3 factorial design). Alum was added as a top dressing to the litter at a rate of 200g ALUM / kg of rice bran. With the exception of the protein levels for feed ：gain(P〈 0.05), there were no significant differences in feed intake, weight gain and feed ：gain of chicks. For ammonia gas emission, both the main effects of Alum and protein(P〈 0.01 and 0.05) at 3weeks and interaction between Alum and protein(P〈 0.05), the main effect of Alum(P〈 0.01) at 6weeks did affected them. In litter excluded the main effects of Alum(P〈 0.05), there was a significant difference among N contents ranged from pH to the rate of C： Organic-N(P〈 0.01).

• The Plant Pathology Journal
• /
• v.16 no.5
• /
• pp.269-279
• /
• 2000

Alfalfa mosaic alfamoviruses(AIMV) were isolated from infected potato (Solanum tuberosum) and azuki bean (Paseolus angularis) in Korea. Two AIMV isolated from potatoes were named as strain KR (AIMV-KR1 and KR2) and AIMV isolated from azuki bean was named as strain Az (AIMV-Az). Each isolated AIMV strain was characterized by using their host ranges, symptom developments, serological relations and nucleotide sequence analysis of coat protein (CP) gene. Strains KR1, KR2, and Az were readily transmitted to 20 of 22 inoculated plant species including bean, cowpea, tomato, tobacco, and potato. AIMV-KR1 and KR2 produced the typical symptoms like chlorotic or necrotic spots in Chenopodium quinoa and Solanum tuberosum cv. Superior. AIMV-Az caused bright yellow mosaic symptom and leaf malformation in Nicotiana glauca, which were different from the common mosaic symptom caused by AIMV-KR1 and KR2. Electron microscope observation of purified virus showed bacilliform virions containing a single-stranded plus-strand RNAs of 3.6, 2.6, 2.0 and 0.9 kbp in length, respectively, similar in size and appearance to those of Alfamovirus. In SDS-PAGE, the coat protein of the two viruses formed a consistent band that estimated to be about 24kDa. The CP genes of the AIMV strains, KR1, KR2, and Az have been amplified by RT-PCR using the specific primers designed to amplify CP gene from viral RNA-3, cloned and sequenced. Computer aided analysis of the amplified cDNA fragment sequence revealed the presence of a single open reading frame capable of encoding 221 amino acids. The nucleotide and peptide sequence of viral CP gene showed that strain KR1, KR2, and Az shared highest nucleotide sequence identities with AIMV strain 425-M at 97.7%, 98.2%, and 97.2%, respectively. CP gene sequences of two strains were almost identical compared with each other. Altogether, physical, serological, biological and molecular properties of the purified virus.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.6
• /
• pp.762-771
• /
• 2010

Two experiments were conducted to determine i) the fermentation characteristics of catfish by-product (C) ensiled with rice bran (RB) or sugarcane molasses (M) in different ratios, and ii) the digestibility of the silages in growing pigs. In the ensiling experiment, there were three ratios of C, ensiled with RB or M, of 8:2, 7:3 and 6:4 (wet basis for C and air-dry basis for RB and M). The six treatments were CRB8:2, CRB7:3, CRB6:4, CM8:2, CM7:3 and CM6:4, with 3 replications per treatment and seven sampling times. The pH of CRB7:3 and CRB6:4 decreased (p<0.05) from the first week and stayed stable until 8 weeks of ensiling, but the pH did not decrease in CRB8:2. The pH of CM8:2, CM7:3 and CM6:4 decreased rapidly from the first week until week 8. Dry matter (DM) and crude protein (CP) contents were slightly lower when catfish by-product was ensiled with RB than with M. Ammonia content in all treatments increased (p<0.05) during ensiling. Lactic acid content in silages with molasses increased from the first week, with the highest value at week 4. However, the lactic acid content in CRB8:2 did not increase with time and had the lowest value of all treatments. Acetic acid proportions of total volatile fatty acids were low at day 0, with the highest value at day 7, decreasing slowly until 8 weeks. The butyric acid proportion was highest at day 0 and decreased up to week 8. The proportion of propionic acid increased during ensiling. The digestibility experiment had a 4${\times}$4 Latin-square design and included 4 castrated crossbreed (Yorkshire${\times}$Landrace) male pigs fed four diets. The basal diet (BD) included rice bran, broken rice and maize meal, and the other three diets included fish meal (FMD) or catfish by-product ensiled with rice bran (CRBD) or sugarcane molasses (CMD). The silages chosen were those which gave the best results in the ensiling experiment for each additive. The coefficient of total tract apparent digestibility (CTTAD) of DM and organic matter (OM) was not significantly different among treatments. The CTTAD of CP was not different among the silage diets, but was lower in BD (p<0.01). The CTTAD of ether extract (EE) was higher in the catfish by-product silage diets than in FMD and BD. There was no significant difference in the digestibility of DM, OM, CP and EE between the fish meal and the by-product silages. In conclusion, catfish by-product can be successfully preserved by ensiling. Moreover, the total tract apparent digestibility of OM, CP and EE in ensiled catfish by-product was comparable with that of fish meal.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.817-822
• /
• 1998

The authors found out that Aspergillus oryzae ATCC 22787 has the activity to produce a pretty strong chitosanase. Therefore, the strain was used for preparing the chitosan hydrolysate with high antimicrobial activity. The antimicrobial activity of the chitosan hydrolysate was increased gradually with decreasing of viscosity of the solution. The chitosan hydrolysate showing viscosity $5{\sim}10{\;}cp{\;}(30^{\circ}C)$ of 2% solution was revealed the most strong antimicrobial activity. The growth of the Bacillus sp. isolated from the fish meat paste was inhibited with the concentration of 50 ppm. The astringent taste of chitosan solution was reduced with decreasing of viscosity of the solution. The fish meat paste products containing 0.3% chitosan hydrolysate was extended its shelf life by 6 days stored at $15^{\circ}C$, 4 days at $20^{\circ}C$ and 2 days at $30^{\circ}C$.

• Journal of Powder Materials
• /
• v.17 no.5
• /
• pp.365-372
• /
• 2010

The evolution of sinterability, microstructure and mechanical properties for the spark plasma sintered(SPS) Ti from commercial pure titanium(CP-Ti) was studied. The densification of titanium with 200 mesh and 400 mesh pass powder was achieved by SPS at $750{\sim}1100^{\circ}C$ under 10 MPa pressure and the flowing $H_2$+Ar mixed gas atmosphere. The microstructure of Ti sintered up to $800^{\circ}C$ consisted of equiaxed grains. In contrast, the growth of large elongated grains was shown in sintered bodies at $900^{\circ}C$ with the 400 mesh pass powder and the lamella grains microstructure had been developed by increasing sintering temperature. The Vickers hardness of 240~270 HV and biaxial strength of 320~340 MPa were found for the specimen prepared at $950^{\circ}C$.

• Journal of Powder Materials
• /
• v.14 no.6
• /
• pp.354-361
• /
• 2007

The bi-materials with Al-Mg alloy and its composites reinforced with SiC and $Al_2O_3$ particles were prepared by conventional powder metallurgy method. The A1-5 wt%Mg and composite mixtures were compacted under $150{\sim}450\;MPa$, and then the mixtures compacted under 400 MPa were sintered at $773{\sim}1173K$ for 5h. The obtained bi-materials with Al-Mg/SiCp composite showed the higher relative density than those with $Al-Mg/Al_2O_3$ composite after compaction and sintering. Based on the results, the bi-materials compacted under 400 MPa and sintered at 873K for 5h were used for mechanical tests. In the composite side of bi-materials, the SiC particles were densely distributed compared to the $Al_2O_3$ particles. The bi-materials with Al-Mg/SiC composite showed the higher micro-hardness than those with $Al-Mg/Al_2O_3$ composite. The mechanical properties were evaluated by the compressive test. The bi-materials revealed almost the same value of 0.2% proof stress with Al-Mg alloy. Their compressive strength was lower than that of Al-Mg alloy. Moreover, impact absorbed energy of bi-materials was smaller than that of composite. However, the bi-materials with Al-Mg/SiCp composite particularly showed almost similar impact absorbed energy to $Al-Mg/Al_2O_3$ composite. From the observation of microstructure, it was deduced that the bi-materials was preferentially fractured through micro-interface between matrix and composite in the vicinity of macro-interface.