• Journal of Biomedical Engineering Research
• /
• v.17 no.3
• /
• pp.327-336
• /
• 1996

This study was performed to investigate the effec% of immersion in water and thermal cycling on the mechanical peoperties of light cured restorative composite resins. Five commerically available light-cured composite resins(Photo Clearfil A : CA, Lite-Fil A . LF, Clearril Photo Posterior CP, Prisms AP.H.. PA, 2100 : ZH) were unto The specimens of 12 m in diameter and 0.7 m in thickness were made, and an immersion in $37^{\circ}C$ water for 7 days and a thermal cycling of 1000 cycles at 15 second dwell time each in $5^{\circ}C$ and $55^{\circ}C$ baths were performed. Biaxial flexure test was conducted using the ball-on-three-ball method at the crosshead speed of 0.5mm/min. In order to investigate the deterioration of composite resins during the thermal cycling test, Weibull analysis for the biaxial flexure strengths was done. Fracture surfaces and the surfaces before and after the thermal cycling test were examined by SEM. The highest Weibull modulus value of 10.09 after thermal cycling tests which means the lowest strength variation, was observed in the CP group, and the lowest value of 4.47 was obsered in the LF Group. Biaxial flexure strengths and Knoop hardness numbers significantly decreased due to the thermal cycling ($\textit{p}$< 0.01), however, they recovered when specimens were drie4 The highest biaxial flexure strength of 125.65MPa was observed in the ZH group after the thermal cycling test, and the lowest value of 64.86MPa was observed in the CA group. Biaxial flexure strengths of ZH and CP groups were higher than those of PA, CF, and CA groups after thermal cycling test($\textit{p}$< 0.05). Knoop hardness numbers of CP group after the thermal cycling test was the highest(95.47 $\pm$ 7.35kg/$mm^2$) among the samples, while that of CA group was the lowest(30.73 $\pm$ 2.58kg/$mm^2$). Knoop hardness numbers showed the significant differences between the CP group and others after the thermal cycling test(($\textit{p}$< 0.05). Fracture surfaces showed that the composite resin failure developed along the matrix resin and the filler/resin interface region, and the cracks propagated in the conical shape from the maximum tensile stress zone.

• Journal of Gastric Cancer
• /
• v.13 no.4
• /
• pp.232-241
• /
• 2013

Purpose: Gastrokine 1 plays an important role in gastric mucosal defense. Additionally, the Gastrokine 1-miR-185-DNMT1 axis has been shown to suppress gastric carcinogenesis through regulation of epigenetic alteration. Here, we investigated the effects of Gastrokine 1 on DNA methylation and gastritis. Materials and Methods: Expression of Gastrokine 1, DNMT1, EZH2, and c-Myc proteins, and the presence of Helicobacter pylori CagA protein were determined in 55 non-neoplastic gastric mucosal tissue samples by western blot analysis. The CpG island methylation phenotype was also examined using six markers (p16, hMLH1, CDH1, MINT1, MINT2 and MINT31) by methylation-specific polymerase chain reaction. Histological gastritis was assessed according to the updated Sydney classification system. Results: Reduced Gastrokine 1 expression was found in 20 of the 55 (36.4%) gastric mucosal tissue samples and was closely associated with miR-185 expression. The Gastrokine 1 expression level was inversely correlated with that of DNMT1, EZH2, and c-Myc, and closely associated with the degree of gastritis. The H. pylori CagA protein was detected in 26 of the 55 (47.3%) gastric mucosal tissues and was positively associated with the expression of DNMT1, EZH2, and c-Myc. In addition, 30 (54.5%) and 23 (41.9%) of the gastric mucosal tissues could be classified as CpG island methylation phenotype-low and CpG island methylation phenotype-high, respectively. Reduced expression of Gastrokine 1 and miR-185, and increased expression of DNMT1, EZH2, and c-Myc were detected in the CpG island methylation phenotype-high gastric mucosa. Conclusions: Gastrokine 1 has a crucial role in gastric inflammation and DNA methylation in gastric mucosa.

• Transactions of Materials Processing
• /
• v.22 no.3
• /
• pp.158-164
• /
• 2013

The spheroidization behavior of cementite in a SK85 high carbon steel was investigated in this study. Fine and coarse pearlite microstructures were obtained by appropriate heat treatments according to the TTT diagram of SK85 high carbon steel. Hot rolled plates of SK85 steel were austenitized at $800^{\circ}C$ for 2 hrs and then put directly into a salt bath at either $570^{\circ}C$ or $670^{\circ}C$ to obtain a fine pearlite (FP) structure and a coarse pearlite (CP) structure, respectively. Cold rolling was subsequently conducted on those specimens with reduction ratios from 0.2 to 0.4. Spheroidization heat treatments were conducted at the subcritical temperatures of 600 and $720^{\circ}C$ for 1 to 32 hrs to elucidate the effect of initial microstructures, heat treatment temperature, and cold reduction ratios on the cementite spheroidization rate. Spheroidization proceeded with fragmentation of cementite plates, spheroidization of the cementite platelets, and coarsening consecutively. Mechanical fragmentation of cementite by cold rolling expedited the rate of spheroidization. The spheroidization rate of FP was much more rapid than that of CP and the spheriodization rate increased with increases in the cold reduction ratio.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.77-77
• /
• 2000

Titanium oxide (TiO2) thin films have valuable properties such as a high refractive index, excellent transmittance in the visible and near-IR frequency, and high chemical stability. Therefore it is extensively used in anti-reflection coating, sensor, and photocatalysis as electrical and optical applications. Specially, TiO2 have a high dielectric constant of 180 along the c axis and 90 along the a axis, so it is highlighted in fabricating dielectric capacitors in micro electronic devices. A variety of methods have been used to produce patterned self-assembled monolayers (SAMs), including microcontact printing ($\mu$CP), UV-photolithotgraphy, e-beam lithography, scanned-probe based micro-machining, and atom-lithography. Above all, thin film fabrication on $\mu$CP modified surface is a potentially low-cost, high-throughput method, because it does not require expensive photolithographic equipment, and it produce micrometer scale patterns in thin film materials. The patterned SAMs were used as thin resists, to transfer patterns onto thin films either by chemical etching or by selective deposition. In this study, we deposited TiO2 thin films on Si (1000 substrateds using titanium (IV) isopropoxide ([Ti(O(C3H7)4)] ; TIP as a single molecular precursor at deposition temperature in the range of 300-$700^{\circ}C$ without any carrier and bubbler gas. Crack-free, highly oriented TiO2 polycrystalline thin films with anatase phase and stoichimetric ratio of Ti and O were successfully deposited on Si(100) at temperature as low as 50$0^{\circ}C$. XRD and TED data showed that below 50$0^{\circ}C$, the TiO2 thin films were dominantly grown on Si(100) surfaces in the [211] direction, whereas with increasing the deposition temperature to $700^{\circ}C$, the main films growth direction was changed to be [200]. Two distinct growth behaviors were observed from the Arhenius plots. In addition to deposition of THe TiO2 thin films on Si(100) substrates, patterning of TiO2 thin films was also performed at grown temperature in the range of 300-50$0^{\circ}C$ by MOCVD onto the Si(100) substrates of which surface was modified by organic thin film template. The organic thin film of SAm is obtained by the $\mu$CP method. Alpha-step profile and optical microscope images showed that the boundaries between SAMs areas and selectively deposited TiO2 thin film areas are very definite and sharp. Capacitance - Voltage measurements made on TiO2 films gave a dielectric constant of 29, suggesting a possibility of electronic material applications.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.47-54
• /
• 2014

The aim of this study is to evaluate the effects of green tea polyphenol (GTP) on anticancer treatment with cisplatin (CP), using both an in vitro cell culture model and an in vivo mouse model of established breast tumor. Mouse breast cancer cells (EMT6) were treated with or without GTP and CP followed by determination of the cell viability using an MTT assay. The relative cell viability of CP treated EMT6 cells was 96% at a 20 ${\mu}g/mL$ concentration of cisplatin; however, in combination with GTP (50 ${\mu}g/mL$), the cell viability decreased to 20% at the same concentration of CP (20 ${\mu}g/mL$). For the in vivo study, EMT6 cells were inoculated into Balb/c mice for the establishment of a tumor-bearing mice model. The tumor-bearing mice were treated with CP (5 mg/kg. i.p.) with or without dietary GTP (0.2% drinking water). Tumor growth was monitored by a measurement of tumor size using a digital caliper, and nephrotoxicity was determined by enzymatic and histological examinations. The levels of p53 and caspase-3 in tumor tissues were examined by a Western blot. In tumor-bearing mice treated with GTP plus CP, the increment of tumor volume showed a significant reduction, compared with CP or GTP alone. The levels of p53 and cleaved caspase-3 (caspase-3/p17) in tumor tissues of tumor-bearing mice were increased by CP and GTP compared to CP alone. In CP treated tumor-bearing mice, ${\gamma}$-glutamyltranspeptidase (GGT) and alkaline phosphatase (AP) activities were decreased, and marked tubular necrosis and dilatation were observed in the kidney. CP-induced enzymatic and histopathological changes in the kidney of tumor-bearing mice were reduced by combinations of GTP with CP. The results of these experiments demonstrated that dietary GTP has a potentiating effect on CP anti-tumor activity and a protective effect against CP-induced renal dysfunction. Therefore, GTP may be used as a modulator in anticancer treatment with CP.

• Korean Journal of Materials Research
• /
• v.15 no.5
• /
• pp.353-360
• /
• 2005

Surface treatment play an important role in nucleating calcium phosphate deposition on surgical Ti implant. Therefore, the purpose of this study is to examine whether the precipitation of apatite on cp-Ti and Ti alloys are affected by surface modification in HCl and $H_2O_2$ solution. Specimens were then chemically treated with a solution containing 0.1 M HCl and 8.8M $H_2O_2$ at $80^{\circ}C$ for 30 mins, and subsequently heat-treated at $400^{\circ}C$ for 1 hour. All specimens were immersed in the HBSS with pH 7.4 at $36.5^{\circ}C$ for 15 days, and the surface was examined with XRD, SEM, EDX ana XPS. Also, pure Ti, Ti-6Al-4V and Ti-6Al-7Nb alloy specimens with and without surface treatment were implanted in the abdominal connective tissue of mice for 4 weeks. All specimens chemically treated with HCl and $H_2O_2$ solution have the ability to form a apatite layer in the HBSS which has inorganic ion composition similar to human blood plasma. The average thickness of the fibrous capsule surrounding the specimens implanted in the connective tissue was $38.57\;{\mu}m,\;62.27\;{\mu}m\;and\;45.64\;{\mu}m$ in the cp-Ti, Ti-6Al-4V ana Ti-6Al-7Nb alloy specimens with the chemical treatment respectively, and $52.20\;{\mu}m,\;75.62\;{\mu}m\;and\;66.56\;{\mu}m$ in the commercial specimens of cp-Ti, Ti-6Al-4V and Ti-6Al-7Nb without any treatment respectively. The results of this evaluation indicate that the chemically treated cp-Ti, Ti-6Al-4V ana Ti-6Al-7Nb alloys have better bioactivity and biocompatibility compared to the other metals tested.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.2
• /
• pp.137-142
• /
• 2004

In this study, a simple procedure is described for patterning biotin on a glass substrate and then selectively immobilizing proteins of interest onto the biotin-patterned surface. Microcontact printing (CP) was used to generate the micropattern of biotin and to demonstrate the selective immobilization of proteins by using enhanced green fluorescent protein (EGFP) as a model protein, of which the C-terminus was fused to a core streptavidin (cSA) gene of Streptomyces avidinii. Confocal fluorescence microscopy was used to visualize the pattern of the immobilized protein (EGFP-cSA), and surface plasmon resonance was used to characterize biological activity of the immobilized EGFP-cSA. The results suggest that this strategy, which consists of a combination of $\mu$CP and cSA-fused proteins. is an effective way for fabricating biologically active substrates that are suitable for a wide variety of applications. one such being the use in protein-protein assays.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.6
• /
• pp.873-882
• /
• 2008

Eight ileally cannulated pigs (BW $35.9{\pm}0.9kg$) were randomly allotted according to a $4{\times}3$ Latin square design to determine the effects of cellulose, pectin and starch on standardized ileal digestibility (SID) and apparent total tract digestibility (ATTD) of crude protein (CP) and amino acids (AA) as well as on the bacterial AA contribution in feces. The pigs were fed the control diet (20.2% CP, % dry matter (DM)) or one of the three experimental diets in which 25% of the control diet was substituted by cellulose, starch or pectin. Due to this substitution, dietary CP levels were lower in the cellulose (15.5% CP, % DM), pectin (15.4% CP, % DM) and starch diet (15.2% CP, % DM). Following a 15-d adaptation period, feces were collected for 5 d and ileal digesta for a total of 24 h. Starch increased SID of CP, while cellulose and pectin had no significant effect on the digestibility of CP. Overall, starch supplementation resulted in higher (p<0.05) SID values of histidine, isoleucine, threonine, alanine, aspartic acid, cysteine, glycine and serine compared with cellulose, while pectin decreased (p<0.05) SID of valine and proline compared with the starch and control diet. Both cellulose and pectin reduced (p<0.05) the ATTD of CP and AA, while starch decreased (p<0.05) ATTD of phenylalanine, alanine, proline and serine compared with the control. With regard to bacterial AA composition of the fecal mixed bacterial mass (MBM), cellulose supplementation increased (p<0.05) its content of N and almost all AA, except for valine, while pectin caused higher contents of arginine, histidine and proline compared with the control (p<0.05). The bacterial contribution of arginine in feces was higher (p<0.05) in the cellulose treatment, while pectin reduced (p<0.05) the bacterial contribution of leucine, alanine, glutamic acid and proline in feces compared with the control. In conclusion, the effects of cellulose, starch and pectin on SID were rather small. Bacterial activity in the large intestine can only explain the reduced ATTD values for arginine in the cellulose treatment, but not for the other AA in the cellulose and pectin treatments, suggesting higher endogenous losses of these AA in the large intestine.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.138.2-139
• /
• 2003

Grapevine leafroll-associated 1 virus (GLRaV-1) and Grapevine leafroll-associated 3 virus (GLRaV-3), member of the genus Ampelovirus, are important viral disease of grapevine in the world. these viruses transmitted only dicotyledonous host by vectors such as mealybugs and there is no suitable herbaceous host for virus. The diseased leaves turn yellowish or reddish depending on cultivars and viruses. Viruses are existed at low concentration and ununiformly distribution in grapevine. Using small-scale double-stranded RNA (dsRNA) extraction method, reverse transcription and polymerase chain reaction (RT-PCR) product of 1Kb long which encoded of coat protein (CP) gene for both viruses was successfully amplified with a specific primers. The RT-PCR product was cloned into the plasmid vector and its nucleotide sequences were determined from selected recombinant cDNA clones. Sequence analysis revealed that the CP of GLRaV-1 consisted of 969 nucleotide, which encoded 323 amino acid residues and CP of GLRaV-3 consisted of 942 nucleotide, which encoded 314 amino acid residues. The CP of GLRaV-1 and GLRaV-3 has 93.8％ and 98.7％ amino acid sequence identities, respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.3
• /
• pp.214-218
• /
• 2014

This study was conducted to assess the feasibility of near-infrared reflectance spectroscopy (NIRS) as a rapid and reliable method for the estimation of crude protein (CP) fractions in forage legume mixtures (sudangrass and pea mixture, and kidney bean and potato mixture). A total of 178 samples were collected and their spectral reflectance obtained in the range of 400~2,500 nm. Of these, 50 samples were selected for calibration and validation, and 35 samples were used for calibration of the data set, and the modified partial least square regression (MPLSR) analysis was performed. The correlation coefficient ($r^2$) and the standard error of cross-validation (SECV) of the calibration models in the CP fractions, A, B1, B2, B3, and C, were 0.94 (1.05), 0.92 (0.74), 0.96 (0.95), 0.91 (0.42), and 0.83 (0.38), respectively. Fifteen samples were used for equation validation, and the $r^2$ and the standard error of prediction (SEP) were 0.87 (1.45), 0.91 (0.49), 0.94 (1.13), 0.36 (0.96), and 0.74 (0.67), respectively. This study showed that NIRS could be an effective tool for the rapid and precise estimation of CP fractions in forage legume mixtures.