• Asian-Australasian Journal of Animal Sciences
• /
• 제17권4호
• /
• pp.497-503
• /
• 2004

The effect of adding carbohydrate-rich feedstuffs to sweet potato leaves (SPL) on silage quality was studied using a total of 180 laboratory silos. Silage quality was assessed by changes of pH, dry matter (DM), crude protein (CP) and ammonia nitrogen ($NH_{3}$-N). Pre-wilted SPL was mixed with cassava root meal (CRM), sweet potato root meal (SPM) or sugar cane molasses (Mo) at levels of 0, 30, 60 and 90 g $kg^{-1}$ (air-dry weight of additives to pre-wilted weight of SPL). Samples for assessing silage quality were collected after mixing the SPL with the additive and thereafter at 7, 14, 28 and 56 days of ensiling. There was a marked decrease in pH after 7 days and the pH remained low and stable until day 56. Addition of 60 and 90 g $kg^{-1}$ resulted in a lower pH (p<0.05) than the other treatments. The DM content of the silage increased (p<0.05) with increasing levels of additive, while there were no differences in DM with time of ensiling. The CP content of the silage decreased (p<0.05) with increasing levels of additive. The CP content did not change up to 28 days, but was lower (p<0.05) after 56 days in all treatments. The $NH_{3}$-N levels were increasing (p<0.05) with time of ensiling, and were lower (p<0.05) with additive levels of 60 g $kg^{-1}$ or higher. Also, the additive source affected the $NH_{3}$-N values, with the lowest values found for Mo. Castrated male pigs (Large White$\times$Mongcai) were used in 4$\times$4 Latin square design to study the total tract digestibility and nitrogen (N) utilisation of diets with inclusion of ensiled SPL. The diets were based on cassava root meal with inclusion of protein from either fish meal (C) or SPL ensiled with CRM (D1), SPL ensiled with SPM (D2) and SPL ensiled with Mo (D3). The digestibility of DM, organic matter (OM) and CP were higher (p<0.05), and the digestibility of crude fibre (CF) was lower (p<0.05), in diet C than in diets D1, D2 and D3. However, there were no differences (p>0.05) in digestibility of dietary components between diets D1, D2 and D3. Also, the excretion of N in faeces was higher (p<0.05) and the N retention was lower (p<0.05) in diets D1, D2 and D3 than in diet C. It can be concluded from the present experiments, that a good quality silage can be produced from pre-wilted SPL by addition of 60 g $kg^{-1}$ of either CRM, SPM or Mo. Diets with inclusion of 450 g ensiled SPL $kg^{-1}$ DM showed a high digestibility of dietary components and thus ensiled SPL should be considered as a potential feed resource for growing pigs.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권6호
• /
• pp.2209-2213
• /
• 2015

DNA methylation of tumor suppressor gene promoters is the most frequent phenomenon leading to inactivation of function, consequently driving malignant cell transformation. Cyclin D2 is implicated in tumor suppression. In our study, we carried out the MSP assay to evaluation the methylation status at CpG islands in the cyclin D2 promoter in breast cancer cases from the Vietnamese population. The results showed that the frequency of methylation reached 62.1% (59 of 95 breast cancer tumors), but was low in non-cancer specimens at 10% (2 of 20 non-cancer specimens). Additionally, with an RR (relative risk) and OR (odd ratios) of 6.21 and 14.8, DNA hypermethylation of cyclin D2 increased the possibility of malignant transformation. Our results confirmed the cyclin D2 hypermethylation could be used as the potential biomarker which could be applied in prognosis and early diagnosis of Vietnamese breast cancer patients.

• 한국자기공명학회논문지
• /
• 제17권1호
• /
• pp.19-23
• /
• 2013

The temperature dependences of the NMR spectrum and the spin-lattice relaxation times in $KH_2PO_4$ were investigated via single-crystal NMR and MAS NMR. The stretched-exponential relaxation that occurred because of the distribution of correlation times was indicative of the degree of the distribution of the double-well potential on the hydrogen bond. The behaviors responsible for the strong temperature dependences of the $^1H$ and $^{31}P$ spin-lattice relaxation times in the rotating frame $T_{1{\rho}}$ in $KH_2PO_4$ are likely related to the reorientational motion of the hydrogen-bond geometry and the $PO_4$ tetrahedral distortion.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.117-120
• /
• 2005

The relationship between strain and applied potential was derived for composite actuators consisting single-wall carbon nanotubes (SWNTs) and conductive polymers (CPs). During deriving the relationship, an electrochemical ionic approach is utilized to formulate the electromechanical actuation of the composite film actuator. The results show that the well-aligned SWNTs composite actuator can give good actuation responses and high actuating forces available. The actuation is found to be affected by both SWNTs and CPs components and the actuation of SWNTs component has two kinds of influences on that of the CPs component: reinforcement at the positive voltage and abatement at the negative voltage. CNT/EAP was fabricated successfully using the chemical polymerization method.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1995년도 추계학술발표회 초록집
• /
• pp.126-138
• /
• 1995

In order to study the gas interchangeability, a series of tests and analysis were conducted regarding to natural gas and gas mixture. Natural gas was selected as a reference and NG-LPG/Air mixture as a substitute gas. The major interest was placed on the determination of interchangeability limits for different mixing conditions. The parameters of Wobbe Index and Combustion Potential were employed in estimating the gas interchangeability, The limits obtained by analysis(AGA, WEAVER, KNOY, GILB) were compared with experimental results. The results estimated showed that the mixing limits of LPG/Air in proper conditions were found to vary with analysis and AGA is considered to be the most appropriate one.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.310-313
• /
• 2000

This paper presents a new scheduling method for ILP processing called NHS(Novel Hybrid Scheduling). It concerns not only exploiting as much ILP as possible like other state-of-the-art scheduling scheme, but also choosing the most important instructions among many ready-to-execute instructions to processors in order to reduce the execution time under limited hardware resource. At the heart of NHS is a conception called CCP(Complex Critical Path), an extension of CP(Critical Path). By using CCP, compiler not only can get a global information of the whole program to extract ILP, but also can collecting data dependence information and control flow information. The paper also presents the simulation results, to date, of our attempts to study the NHS scheduling method. The results indicate good potential for this scheduling method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.772-774
• /
• 2000

The objective of a cathodic protection system (CP) is to protect the buried metallic structure against the corrosion caused by chemical reaction between the buried structure and the surrounding medium, such as soil. This paper presents a boundary element application to determine the optimal impressed current densities in a cathodic protection system. The potential within the electrolyte is described by the Laplace's equation with nonlinear boundary conditions which are enforced based on experimentally determined electrochemical polarization curves. The optimal impressed current densities are determined in order to minimize the power supply for protection. The solution is obtained by using the conjugate gradient method in which the governing equations and the protecting conditions are taken into account by the penalty function method. Numerical example are presented to demonstrate the practical applicability of the proposed method.

• 산업경영시스템학회지
• /
• 제38권1호
• /
• pp.182-187
• /
• 2015

Process capability indices (PCIs) have been widely used in manufacturing industries to provide a quantitative measure of process potential and performance to meet the specification limits on quality characteristics. The most of existing PCIs are concerned with a single variable. But, in many cases, people want to express a integrated PCI which includes a couple of sequential processes. In this paper, we analyzed the characteristics of system PCIs such as ${\bar{Cp}}(f)$, $SC_{pk}$, $SC_{psk}$, $C^T_{psk}(m)$ and $SC_{pm}(m)$.

• Corrosion Science and Technology
• /
• 제5권3호
• /
• pp.112-116
• /
• 2006

This study has been conducted to monitor the corrosion rate of cathodically protected structure and corrosion inhibited system using multi-line thin-film electrical resistance (TFER) sensor in various environments. The field test data of TFER sensor for the corrosion monitoring of cathodically protected underground pipeline in soil environments and of corrosion inhibited gas heaters were also presented. The sensor was found to be a powerful method to commit the sensitive pick-up of small corrosion rate which can be observed in the cathodically protected and corrosion inhibited systems.

• ETRI Journal
• /
• 제41권2호
• /
• pp.184-196
• /
• 2019

Wavelet packet modulation (WPM) is a multicarrier modulation (MCM) technique that has emerged as a potential alternative to the widely used orthogonal frequency-division multiplexing (OFDM) method. Because WPM has overlapped symbols, equalization cannot rely on the use of the cyclic prefix (CP), which is used in OFDM. This study applies linear minimum mean-square error (MMSE) equalization in the time domain instead of in the frequency domain to achieve low computational complexity. With a modest equalizer filter length, the imperfection of MMSE equalization results in subcarrier attenuation and noise amplification, which are considered in the development of a bit-loading algorithm. Analytical expressions for the bit error rate (BER) performance are derived and validated using simulation results. A performance evaluation is carried out in different test scenarios as per Recommendation ITU-R M.1225. Numerical results show that WPM with equalization-aware bit loading outperforms OFDM with bit loading. Because previous comparisons between WPM and OFDM did not include bit loading, the results obtained provide additional evidence of the benefits of WPM over OFDM.