• Journal of Technologic Dentistry
• /
• v.33 no.4
• /
• pp.263-270
• /
• 2011

Purpose: The grindability of binary Ti-X%Zr(X=10,20,40) alloys in order to develop a Ti alloy with better machinability than unalloyed titanium has been evaluated. Methods: Experimental Ti-Zr alloys were made in an argon-arc melting furnace. Slabs of experimental alloys were ground using a SiC abrasive wheel on an electric handpiece at circumferential speeds(12000,18000,25000 or 30000rpm) by applying a force(200gr). Grinding rate was evaluated by measuring the amount of metal volume removed after grinding for 1 minute and the volume ratio of metal removed compared to the wheel material lost, which was calculated from the diameter loss (grinding ratio). Experimental datas were compared to those for cp Ti(commercially pure titanium) and Ti-6%Al-4%V alloy were used controls. Results: It was observed that the grindability of Ti-Zr alloys increased with an increase in the Zr concentration. More, they are higher than cp Ti, particularly the Ti-20%Zr alloy exhibited the highest grindability at all circumferential speeds. There was significant difference in the grinding rate and grinding ratio between Ti-20%Zr alloy and cp Ti at any speed(p<0.05). Conclusion: By alloying with Zr, the Ti exhibited better grindability at all circumferential speeds. the Ti-20%Zr alloy has a great potential for use as a dental machining alloy.

• Corrosion Science and Technology
• /
• v.11 no.3
• /
• pp.77-81
• /
• 2012

Cathodic protection(CP) is widely used as a means of protecting corrosion for not only marine structures like ship hulls and offshore drilling facilities, but also underground structures like buried pipelines and oil storage tanks. The principle of CP is that the anodic dissolution of metal can be protected by supplying electrons to the cathode metal. When unprotected structures are nearby to CP systems, interference problems between unprotected and protected structures may be happened. The stray current interference can accelerate the corrosion of nearby structures. So far many efforts have been made to reduce the interference in the electric railway systems adjacent to the underground metal structures like buried pipelines and gas/oil tanks. During recent few decades the protection technologies against stray current induced corrosion have been significantly improved and a number of techniques have been developed. However, there is very limited information an marine environments. Some complex harbor structures are protected by two cathodic protection systems, i.e. sacrificial anode cathodic protection(SACP) and impressed current cathodic protection(ICCP). In this case, when the protection current from sacrificial anodes returns to the cathode through electrolyte, it passes through nearby other low resistance metal structures. In many cases the stray current of ICCP systems influences the function of SACP. In this study, the risk of stray current from the SACP system to adjacent reinforced concrete structures has been verified through laboratory experiments. Concrete and steel pile structures modeled a part of bridge have been investigated in terms of CP potential and current between the two. The variation of stray current according to the magnitude of ICCP/SACP has been studied to mitigate it and to suggest the proper protection criteria.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.1-6
• /
• 2014

CPS (cyber-physical systems) which consists of connected and diverse embedded systems and physical systems are a new paradigm. Traditional systems were usually considered to be passive and dumb parts in physical systems, but with CPS, we have to take into account what are being moved or changed in the physical systems. So, as increasing the complexity of CPS, potential errors in the systems also increase. In this paper, for enhancing the reliability of CPS, we exploit an executable-model-based design methodology and propose a distributed simulation method to verify the design of CPS. For the design of the systems including discrete and continuous factors, we apply DEV&DESS formalism and simulate models in distributed simulation environments through DDS middleware. We also illustrate the applications of CPS with our modeling tool.

• Physical Therapy Korea
• /
• v.24 no.2
• /
• pp.58-65
• /
• 2017

Background: Children with cerebral palsy (CP) have impaired postural control, but critically require the control of stability. Consequently, therapeutic interventions for enhancing postural control in children with CP have undergone extensive research. One intervention is sensorimotor training (SMT) using a Flexi-bar, but this has not previously been studied with respect to targeting trunk control in children with CP. Objects: This study was conducted to determine the effect of SMT using a Flexi-bar on postural balance and gait performance in children with CP. Methods: Three children with ambulatory spastic diplegia (SD) participated in the SMT program by using a Flexi-bar for forty minutes per day, three times a week, for six weeks. Outcome variables included the pediatric balance scale (PBS), trunk control movement scale (TCMS), 10 meter walking test (10MWT), and 3-dimensional movement coordination measurement. Results: The SMT provided no statistically significant improvement in PBS, TCMS, 10MWT, or 3-dimensional movement coordination measurement. However, positive changes were observed in individual outcomes, as balance and trunk control movement were improved. Conclusion: SMT using a Flexi-bar may be considered by clinicians as a potential intervention for increasing postural balance and performance in children with SD. Future studies are necessary to confirm the efficacy of Flexi-bar exercise in improving the functional activity of subjects with SD.

• Journal of Technologic Dentistry
• /
• v.35 no.4
• /
• pp.295-302
• /
• 2013

Purpose: The grindability of Ti-10%Zr-X%Cr(X=0,1,3) alloys in order to develop Ti alloys for dental applications with better machinability than unalloyed titanium has been evaluated. Methods: Experimental Ti-10%Zr-X%Cr(X=0,1,3) alloys were made in an argon-arc melting furnace. Slabs of experimental alloys were ground using a SiC abrasive wheel on an electric handpiece at one of the four rotational speeds of the wheel (12000, 18000, 25000 or 30000rpm) by applying a force(100gf). Grindability was evaluated by measuring the amount of metal volume removed per minute(grinding rate) and the volume ratio of metal removed compared to the wheel material lost, which was calculated from the diameter loss (grinding ratio). Experimental datas were compared the results with those of cp-Ti(commercially pure titanium) Results: It was observed that the grindability of Ti-10%Zr-X%Cr(X=0,1,3) alloys increased with an increase in the Cr concentration. More, they are higher than cp-Ti, particularly the Ti-10%Zr-3%Cr alloy exhibited the highest grindability at all rotational speeds except 12000rpm. There was significant difference in the grinding rate and grinding ratio between Ti-10%Zr-3%Cr alloy and cp-Ti at all rotational speeds(p<0.05). Conclusion: The Ti-10%Zr-3%Cr alloy exhibited better grindability at high rotational speeds, great potential for use as a dental machining alloy.

• Animal Bioscience
• /
• v.37 no.4
• /
• pp.678-688
• /
• 2024

Objective: Reduced crude protein (CP) diets offer potential benefits such as optimized feed efficiency, reduced expenses, and lower environmental impact. The objective of this study was to evaluate black soldier fly larvae (BSFL) meal on a low-protein diet for duck performance, blood biochemical, intestinal morphology, gastrointestinal development, and litter. Methods: The experiment was conducted for 42 days. A total of 210-day-old male hybrid ducklings (5 replicate pens, 7 ducks per pen) were randomly assigned to 6 dietary treatments (3×2 factorial arrangements) in randomized design. The factors were CP level (18%, 16%, 14%) and protein source feed soybean meals (SBM), black soldier fly larvae meals (BSFLM). Results: Reduced dietary CP levels significantly decreased growth performance, feed intake, the percentage of nitrogen, pH (p<0.05), and tended to suppress ammonia in litter (p = 0.088); increased lipid concentration; and enhanced relative weight of gastrointestinal tracts (p<0.05). In addition, dietary BSFL as a source of protein feed significantly increased lipid concentration and impacted lowering villus height and crypt depth on jejunum (p<0.05). Conclusion: In conclusion, the use of BSFLM in a low-protein diet was found to have a detrimental effect on growth performance. However, the reduction of 2% CP levels in SBM did not have a significant impact on growth performance but decreased nitrogen and ammonia concentrations.

• Reproductive and Developmental Biology
• /
• v.35 no.1
• /
• pp.105-113
• /
• 2011

The present study investigated the nuclear remodeling, development potential with telomerase activity and transcription level of X-linked genes (ANT3, HPRT, MeCP2, RPS4X, XIAP, XIST and ZFX) in the bovine somatic cell nuclear transfer (SCNT) embryos using two different fusion and activation methods. Female adult fibroblasts were injected into perivitelline space of in vitro matured oocytes. The oocyte-nucleus complexes were fused and followed by immediately either activated (Group 1), or activated at 1 h post-fusion (hpf) (Group 2), respectively. The incidence of normal premature chromosome condensation (PCC) at 1 hpf was slightly increased in the Group 2, compared to those of Group 1, but there was no significant (p<0.05) difference. The incidence of normal pronucleus (PN) and chromosome spread at 5 and 18 hpf were significantly (p<0.05) higher in the Group 2 than those of Group 1. The cleavage rate to 2-cell stage, developmental rate to blastocyst stage, and the mean number of total and ICM cell numbers were significantly (p<0.05) higher in the Group 2, compared to those of Group 1. Level of telomerase activity was significantly (p<0.05) higher in the SCNT blastocysts of Group 2, compared to those of Group 1. Transcript levels of HPRT, MeCP2 and XIST were not significantly (p<0.05) different between blastocysts of Group 1 and 2. However, transcript level of ANT3, RPS4X, XIAP and ZFX were significantly (p<0.05) up-regulated in the SCNT blastocysts of Group 2, compared to those of Group 1. Taken together, it is concluded that oocyte activation at 1 hpf induces the enhanced developmental potential by efficient nuclear remodeling and subsequent facilitation of the nuclear reprogramming of bovine SCNT embryos.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.1
• /
• pp.27-38
• /
• 1996

This study was conducted to evaluate the potential of Festulolium braunii(Festuca pratensis Huds. $\times$ Loliurn mulrijZorum Lam.)as forge sources. The experiment was arranged in a split plot design with four replications from Feb. 1995. to Jan. 1996 at Hohenheim university. Main plots consisted of three forage species, Festulolirtrn braunii(Paulita), Lolium multiJomm(Lemtla), and Secale cereale(Halo) and subplots consisted of three maturity, boot, heading, and anthesis. The growth characteristics, DM yields, nutritive value, N and energy balance were observed. The heading date of Festulolium braunii was about two days earlier than that of Loliunz mrtltiflorum, farthermore Fesrulolium braunii retained higher leaf weight ratio(LWR) than other species. Festulolium brarrnii failed to show any significant differences in grass length, number of tillers, LAI, CGR, and DM accumulation when harvested at the same stage of maturity as compare with Loliurn mulriiflorutn or Setale cerede, bur the content of CP, OMD, and mineral elements and NEL value of Festulolium braunii compare to othes were slightly increased(P<0.05), while the content of NDF, ADF, and lignin decreased(P<0.05). The yield of CP was greater for Festulolium braunii than for Lolium multfimm and yields of DOM and NEL per unit area(ha) for Festulolium braunii were greater than for other species(P<0.05). The equivalent or higher DM production and nutritive value are obtained when Festulolium braunii are cut during the period from boot to anthesis stages, therefor DM intake, preference, and N and energy balance were also higher for Festulolirtm braunii compare to for other species. It could be suggested that Lolium multrfirum would be a more suitable substitute to Festuloliron braunii without decreasing forage production and quality, but the substitutive effect of Secale cereale would be difficult because of the maor differences in growth type and period compare to Fesrulolium braunii. From above the results of this experiment it appears that Festulolium braunii have a potential to provide forage sources. but funher research is needed to ascertain their potential under the climate of Korea.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.578-587
• /
• 2015

Nuclear SSR (nSSR) and chloroplast SSR (cpSSR) markers were analyzed to assess the parameters of mating system in seed orchard, such as outcrossing rates, the number of potential pollen contributors, paternal contribution rates, degree of pollen contamination, and biparental inbreeding ($t_m-t_s$). In 2006, 2007, seeds were collected from the seed orchard of Pinus densiflora, established in 1977 at Anmyeon island. Estimates of outcrossing rates ranged from 94.9 to 100% (mean 98.9%) in 2006 and from 91.2 to 100% (mean 97.7%) in 2007 on the basis of the analysis of cpSSR haplotypes and from 90.3 to 100% (mean 95.9%) in 2006 and from 81.6 to 100% (mean 95.3%) in 2007 on the basis of the analysis of nSSR genotypes. By cross checking of both DNA markers, mean cumulative outcrossing rates of 100% and 98.9% were estimated in each year. Mean contamination rates were estimated as 48.9% and 42.4%, respectively. On the basis of cpSSR haplotype observed in each seed, paternal contribution rates (the number of pollen contributors) were estimated as 0.458 (mean 16.2) in 2006 and 0.512 (mean 14.8) in 2007. In conclusion, considering pretty high level of outcrossing rates observed in a seed orchard, there might be little to be influenced by inbreeding depression for genetic potential of the seeds induced by selfing. Estimates of the mating system parameters obtained from the two reproductive years were not statistically different, which revealed stable genetic quality of seeds produced in different years. Observed results from this study may provide useful information for the management and establishment of the seed orchard of the progressive generation.

• Advances in environmental research
• /
• v.6 no.3
• /
• pp.159-171
• /
• 2017

A successful oil well drilling depends largely on a good mud Program. During drilling, mud provides sufficient hydrostatic pressure, removes drill cuttings and cools drill bits. Mud additives are always required to provide sufficient hydrostatic pressure to ensure borehole stability. Barium Sulphate ($BaSO_4$) also known as barite is the prevalent weighting material but there is needed to develop local materials to augment the use of Barite. The present search is concerned on the early Carboniferous succession exposed in Um Bogma Formation, west central Sinai, Egypt as a new weighting agent in drilling fluids. The increases in the cost of drilling fluids and a shortage of using barite have introduced the locale dolomite as alternative weighting materials. The rheological properties of mud drilling samples weighted by local dolomite samples are being examined and investigated to know its potential to be used as a weighting material in drilling mud. Two mud samples were prepared which comprised of fresh water, caustic soda, bentonite and the weighting material. The weighting materials are added to achieve the required density. The first sample: Water-based mud with commercial barite of density between 10.00 lb/gm and 18.00 lb/gm. The second sample: Water-based mud with dolomite of density between 10.00 lb/gm and 18.00 lb/gm. These samples were analyzed and the density, rheological properties, aging of barite and dolomite and solid contents were investigated. At 10.00 lb/gm, the yield point of dolomite was $20.00lb/100ft^2$ and barite $22.00lb/100ft^2$ while the 10 second gel strength of dolomite was $30.00lb/100ft^2$ and $22.00lb/100ft^2$ for barite. Similarly, little difference was observed in plastic and apparent viscosities. At 10.00 lb/gm, the plastic and apparent viscosities of dolomite were 8.00 cp and 20.00 cp while barite was 8.00 cp and 24.00 cp. The result show that dolomite mud sample gave a little higher yield point and gel strength than barite mud sample. Therefore, dolomite has the potential to be used as weighting material in drilling mud in place of barite thereby enhancing the local content initiative of the government. When dolomite is sourced locally and used it will reduce overall mud and drilling costs.