Browse > Article
http://dx.doi.org/10.14347/kadt.2013.35.4.295

Grindability of Ti-10%Zr-X%Cr(X=0,1,3) Alloys for Dental Applications  

Jung, Jong-Hyun (Dept. of Dental Lab. Technology, Gwangju Health University)
Shin, Jae-Woo (Dept. of Dental Lab. Technology, Gwangju Health University)
Publication Information
Journal of Technologic Dentistry / v.35, no.4, 2013 , pp. 295-302 More about this Journal
Abstract
Purpose: The grindability of Ti-10%Zr-X%Cr(X=0,1,3) alloys in order to develop Ti alloys for dental applications with better machinability than unalloyed titanium has been evaluated. Methods: Experimental Ti-10%Zr-X%Cr(X=0,1,3) alloys were made in an argon-arc melting furnace. Slabs of experimental alloys were ground using a SiC abrasive wheel on an electric handpiece at one of the four rotational speeds of the wheel (12000, 18000, 25000 or 30000rpm) by applying a force(100gf). Grindability was evaluated by measuring the amount of metal volume removed per minute(grinding rate) and the volume ratio of metal removed compared to the wheel material lost, which was calculated from the diameter loss (grinding ratio). Experimental datas were compared the results with those of cp-Ti(commercially pure titanium) Results: It was observed that the grindability of Ti-10%Zr-X%Cr(X=0,1,3) alloys increased with an increase in the Cr concentration. More, they are higher than cp-Ti, particularly the Ti-10%Zr-3%Cr alloy exhibited the highest grindability at all rotational speeds except 12000rpm. There was significant difference in the grinding rate and grinding ratio between Ti-10%Zr-3%Cr alloy and cp-Ti at all rotational speeds(p<0.05). Conclusion: The Ti-10%Zr-3%Cr alloy exhibited better grindability at high rotational speeds, great potential for use as a dental machining alloy.
Keywords
Grindability; Ti-10%Zr-X%Cr(X=0,1,3) alloys; Grinding rate; Grinding ratio; cp-Ti(commercially pure titanium);
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Ashirura Y, Motonishi S. Machining, Fabrication technique of titanium, Japan Titanium Society, Tokyo, 19-50, 1992.
2 Chandler HE. Machining of reactive metas. Metal handbook 9th ed.Vol.16 Machining, ASM Inc., Metals Park, OH, 844, 1989.
3 Dahn CJ. Explosively nd pyrophoricity of metal powders, Metals Handbook 9th ed., Vol.7 Powder Metallurgy, ASM Int., Metals Park, OH, 194-200, 1989.
4 Ho WF, Cheng CH, Pan CH, Wu SC, Hsu HC. Structure, mechanical properties and grindability of dental Ti-10Zr-X alloys, Mater Sci Eng C, 29, 36-43, 2009.   DOI   ScienceOn
5 Ho WF, Chen WK, Wu SC. Structure, mechanical properties, and grindability of dental Ti-Zr alloys, J Mater Sci: Mater Med, 19, 3179- 3186, 2008.   DOI   ScienceOn
6 Jung JH. Mechanical properties and corrosion resistance of Ti-Zr-(Nb,Pd) based alloys for biomedical applications, Major in metallugical engineering graduate school, Chosun university, p.46, 2000.
7 Jung JH, Noh HR. Grindability of cast Ti- X%Zr(X=10,20,40) alloys for dental applications, J KADT, 33(4), 263-270, 2011.   과학기술학회마을
8 Kikuchi M, Takada Y, Kiyosue S, Yoda M, Woldu M, Cai Z, Okuno O, Okabe T. Grindability of cast Ti-Cu alloys, Dent Mater, 19, 375-381, 2003.   DOI   ScienceOn
9 Kikuchi M, Takahashi M, Sato H, 0kuno O, Nunn ME, Okabe T. Grindabilty of cast Ti-Hf alloys, J Biomed Mater Res, Part B: Appl Biomater., 77B, 34-38, 2006.   DOI   ScienceOn
10 Murray Jl. Binary alloy phase diagrams, in alloy phase diagram, ed by Baker A, ASTM International, Materials Park, OH, 340, 1987.
11 Nakajima H, Okabe T. Titanium in dentistry: Developmental and research in the U.S.A., Dent Mater J, 15(2), 77-90, 1996.   DOI   ScienceOn
12 Okazaki Y, Asao S, Rao S, Tateishi T. Effect of concentration of Zr, Sn, Nb, Ta, Pd, Mo, Co, Cr, Si, Ni, Fe on the relative growth ratios of bio-cells, J Japan Inst Metals, 60(9), 902, 1996.   DOI
13 Takeyama H, Murata R. Study on machinability of pure titanium, J Jpn Soc Preci Eng, 28:6, 331, 1996.
14 Watanabe I, Kiyosue S, Ohkubo C, Aoki T, Okabe T. Machinality of cast commercial titanium alloys, J Biomed Mater Res(Appl Biomater, 63, 760-764, 2002.   DOI   ScienceOn