• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.417-420
• /
• 2004

As a lot of components are developed by CBD methodology, COTS are activated along with fast technology change of software. In this paper, implemented a view that show class diagram and specification of component in web. For this, we classified components in database and each information is used to retrieve through the view.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.36.2-36.2
• /
• 2008

This paper presents the impact of Japanese radio source on the S-Band communication between KOMPSAT-2 satellite and TT&C ground system. Major specifications such as transmitting EIRP (Effective Isotropic Radiated Power) and location of Japanese terrestrial station were informed from Radio Research Laboratory in Korea Communication Commission. To estimate path loss in S-Band, the distance between Japanese station and TT&C ground system was obtained by using COTS (Commercial Off-The-Shelf) software. After that the signal strength of Japanese radio source placed at the TT&C ground system was calculated from link parameters such as transmitting EIRP, path loss, and receiving antenna gain. Consequently, this paper shows that the degradation caused by Japanese radio source is acceptable to TT&C ground system for satellite operation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.60-65
• /
• 2014

Shelter system is applying to weapon systems as usage of performing specific mission with arranging several electronic equipments and operators. Recently the electronic equipments is changing from development products to COTS(Commecial on-the-shelf) for demonstrating high performance at low cost. As internal operators of shelter system conduct several missions for specific or long time in this the present situation, One of the most important element considering the best combat power is internal noise level. Therefore, I desire to analyze the features and foresee muliple noise level with test for conforming whether requirements of design is met or not in this research paper.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.239-243
• /
• 1997

상용기기(Commercial Grade Item CGI)란 구조물, 시스템, 콤포넌트 또는 그것들의 일부분을 구성하는 것으로써 안전기능(safety function)에 영향을 미치지만 basic component로써 설계되거나 제작되지 아니한 것을 의미한다 즉, ASME/NQA-1 Appendix B의 엄격한 품질보증 프로그램 하에서 설계되고 제작되지 아니한 것으로써 원전 이외의 분야에서 상용적으로 널리 사용되고 있는 기기들을 의미한다. 본 논문에서는 이러한 원전 안전등급 분류기준 Non-Nuclear System(NNS) Simple에 해당되는 Non-Safety CGI를 Safety Application의 Nuclear Grade Item으로 사용하기 위한 CGI 평가 및 승인 절차를 제안하고 새로운 CGI 생명주기 모델을 제시하였다. 본 논문에서 제시한 CGI Dedication 절차 및 CGI 생명주기 모델은 우리나라 원전 계측제어계통의 디지털 upgrade plan 및 교체, 신규원전 상용기기 평가방법론에 적용할 수 있을 것이다. CGI Dedication은 10여년전부터 원자력계가 고민해온 분야로써 원전 계측제어계통의 디지털화에 따라 상용 (Commercial Off The Shelf : COTS) 소프트웨어의 승인과 함께 전세계적으로 hot issue가 될 만큼 활발한 연구와 논의가 현재 진행되고 있는 분야이다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.451-453
• /
• 2003

인터넷과 개인컴퓨터가 대중화되어 사용자층이 넓어지고, 컴퓨터 기술이 다양화됨에 따라 점차 고가용성 서버에 대한 관심이 높아지면서 낮은 비용에 높은 성능을 만족시켜줄 수 있는 클러스터링 시스템이 인기를 끌고 있다. 하지만 기존의 클러스터링 시스템은 높은 성능에 비해 특정 플랫폼에 종속적이거나 특정 어플리케이션을 위한 구성이기 때문에 하나의 클러스터링 시스템을 여러 가지 플랫폼에서 다양한 목적으로 사용하기에는 부적절하다. 특정 장치 및 프로토콜 혹은 플랫폼에 의존적인 시스템은 유지보수 및 확장성의 제약을 받게 되기 때문에 이질적 컴포넌트들을 유기적으로 결합할 수 있는 방법이 요구되며 이러한 시스템을 효과적으로 구현하기 위해서는 표준 기반의 COTS (commercial-off-the-shelf) 미들웨어의 적용이 반드시 필요하다. 본 논문에서는 미들웨어로서 분산객체컴퓨팅의 표준인 CORBA 로드 밸런싱 서비스를 이용하여 유지보수 및 확장성이 용이하고 다양한 플랫폼에서 사용이 가능하며 여러 종류의 어플리케이션의 수행을 위한 클러스터 노드의 동적 추가/삭제가 가능한 범용 클러스터링 시스템을 설계하고 구현한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.1415-1417
• /
• 2012

레이더 시스템에서 신호처리에 대한 연산 량 및 데이터의 전송 용량은 시스템 개발 시, 성능과 구성을 결정하는 주요 요소다. 이런 요소에 대한 정확한 사전 예측은 시스템 전체 성능 및 개발 기간과 연구비용에 영향 끼친다. 레이더 신호처리에 대한 정확한 연산 량 및 데이터 전송 량의 예측은 개발 전문가의 경험과 COTS 보드의 성능으로 결정된다. 이런 예측을 보다 정확하게, 보편적으로 하기 위해서 시뮬레이션을 이용하는데, 그 중 하나인 AXIS Development Tool은 개발자에게 편리성과 효율성을 제공한다. 이 시뮬레이션 기능은 개발 보드와의 동일 환경을 제공함으로 개발의 시간을 단축시키고, 사용자의 편리한 GUI 환경을 제공함으로 개발의 유연성을 제공해 개발 성능에 대한 예측이 정확하여 안정적 개발을 보장한다.

• Journal of The Korean Institute of Defense Technology
• /
• v.5 no.2
• /
• pp.23-30
• /
• 2023

TRA(Technology Readiness Assessment) quantitatively assesses the current level of domestic technology and is used as a key tool for determining the possibility of domestic R&D and risk management. However, since the current TRA utilizes hardware-oriented TRL(Technology Readiness Level), it is suitable for independent assessment of each technologies, but has limitations in evaluation from a system integration perspective. In addition, the checklist-based assessment is highly likely to involve subjective evaluation. This study proposes an enhanced TRA framework by redefining TRA procedures and criteria from the systems integration perspective of system engineering. We focused on developing a framework that overcomes the limitations of the current TRL/TRA and enables easier and more intuitive assessment. The proposed framework distinguishes between TE(Technology Element) and CTE(Critical Technology Element) in terms of HW, SW and interface and redefines TRL. TRA is performed according to the TRL redefined from the above three points of view, and the lowest evaluation value is used as system maturity level in consideration of risk management. The proposed CTE selection method minimizes the intervention of the evaluator by utilizing the quantitative goal of the key ROC(Required Operational Capability), development difficulty, and application of COTS(Common Off The Shelf) technology. The effectiveness of this framework was confirmed through a case study of the TSS(Target Surveillance System). It is hoped that starting with this study, research at the framework level will be activated and contribute to the improvement of the TRA system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.4
• /
• pp.413-418
• /
• 2009

The S-band Transponder for telemetry and command of small satellite is designed and fabricated as prototype model using COTS(Commercial Off-The-Shelf) components. QPSK modulator and demodulator of transponder is implemented by using FPGA for system extension. The transponder consists of RF Front End, RF Modulator, RF Demodulator, and MODEM. The measured results of fabricated transponder show BER of less than $1.1{\times}10^{-6}$ at -105 dBm input power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.2050-2058
• /
• 2011

The objective of this thesis is to research the software requirement management system for the development of operational flight program (OFP) which is embedded in aircraft avionics. It offers the function to record the requirement revision log. In fact, the COTS (commercial off-the-shelf) program which has similar function already exists in the market. But this kind of software programs are too complicated and relatively expensive in acquisition. Furthermore, they require too expensive maintenance cost, medium sized business company, this thesis intended to provide the software requirement management system that can be simply installed and easily used.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1188-1195
• /
• 2012

The trend for the development of radar is the active phased-array radar system. The trade-off between the processing speed and the number of the signal process board for the real time signal processing has to be optimized particularly in multichannel radar system. This paper introduces a transmission technique in order to transmit a large amount of received data from an Antenna Part to Signal Process Part. As a result, the number of the S/L board(COTS board) is reduced to one half, and the margin of the data transmission rate is about 2 times higher than the original method.