• Korean Journal of Environment and Ecology
• /
• v.29 no.1
• /
• pp.29-45
• /
• 2015

Water chemistry and fish community, based on fish compositions and ecological characteristics(trophic/tolerance guilds and condition factor), were compared in Gucheon Reservoir($G_cR$) and Yeoncho Reservoir($Y_cR$). Chemical parameters of water quality such as BOD, COD, nutrient(N, P) and suspended solids indicated that water quality was better in the $Y_cR$ than $G_cR$, and the temporal variability in seasonal and interannual patterns were greater in the $Y_cR$. The greater variability was mainly attributed to intense dilutions of reservoir water by Asian monsoon rain during July-August. Fish guild analysis indicated that species diversity was higher in the $G_cR$ than the $Y_cR$, and that the proportion of tolerant and omnivore species were greater in the $Y_cR$. Regression analysis of body weight-total length showed that the regression coefficient(b value) was lower in the $G_cR$(2.15 ~ 2.40) than the $Y_cR$(2.59 ~ 3.14). Condition factor(K) of fish against the total length showed negative slope of Zacco temminckii, Carassius auratus, Pseudorasbora parva and Rhinogobius brunneus population in the $G_cR$, and a positive slope of Carassius auratus and Rhinogobius brunneus population in $Y_cR$. Overall, our data suggest that the growth of the fish populations, based on the length-weight relations and condition factor, reflected the trophic regime of nutrients and organic matter.

• Fisheries and Aquatic Sciences
• /
• v.27 no.6
• /
• pp.356-365
• /
• 2024

The study was conducted in the Terie River between January and April 2022. The objectives of the study were to assess the fish species composition, determine the length-weight relationship and condition factor and assess the water quality of the river using international water quality guideline for aquatic life. Gillnets with different mesh sizes, 4, 6, 8 and 10 cm were used to collect fish specimens in both dry and wet seasons. Immediately after capture, the total length (TL) and total weight (TW) of each individual were measured in centimeters and grams, respectively, and their relationship was determined using the power function. The physicochemical water quality parameters were analyzed using standard procedures and wagtech portable water quality Kits and Secchi Disk apparatus. A total of 667 fish specimens were collected from the Terie River, 410 and 257 in dry and wet seasons respectively. A total of six fish species, Oreochromis niloticus, Labeobarbus intermedius, Labeobarbus nedgia, Labeobarbus beso, Clarias gariepinus, and Ramius loti were recorded. For length-weight relationship and condition factor analysis, more abundant fish species (O. niloticus and L. intermedius) which were found in both seasons were selected. The length and weight relationship of L. intermedius were TW = 0.0073TL^3.04 in dry and TW = 0.0337TL^2.59 in we season indicated isometric and negative allometric growth respectively. While O. niloticus showed negative allometric growth, TW = 0.096TL^2.44 and TW = 0.0335 TL^2.76 in dry and wet seasons, respectively. The mean Fulton condition factor (FCF) of L. intermidus were 0.85 ± 0.03 and 0.94 ± 0.25 in dry and wet seasons, respectively. The FCF of O. niloticus was 1.70 ± 0.13 and 1.73 ± 0.12 in dry and wet seasons respectively. Except for ammonia, the physicochemical water quality parameters were with the permissible limit for aquatic life and are suitable for fishes Terie River. The river has commercially important fish specimens that could be used for food security and livelihood improvement. However, there is very limited fishing activity in the river due to less awareness on the value of fishes. Therefore, sustainable fishery development should be done in the river.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.1
• /
• pp.49-63
• /
• 2014

Bearing capacity factor $N_{\gamma}$ and shape factor were studied for rigid strip and circular footings with a rough base on sand by numerical modelling considering the effect of dilation angle. The numerical model was developed with an explicit finite difference code. Loading procedures and interpretation methods were devised in order to shorten the running time while eliminating the exaggeration of the reaction caused by the explicit scheme. Using the Mohr-Coulomb plasticity model with associated (${\psi}={\phi}$) and nonassociated (${\psi}$ < ${\phi}$) flow-rules, the bearing capacity factor $N_{\gamma}$ was evaluated for various combinations of internal friction angles and dilation angles. Bearing capacity factor decreased as the dilation angle was reduced from the associated condition. An equation applicable to typical sands was proposed to evaluate the relative bearing capacity for the nonassociated condition compared to the associated condition on which most bearing capacity factor equations are based. The shape factor for the circular footing varied substantially when the plane-strain effect was taken into account for the strip footing. The numerical results of this study showed closer trends with the previous experimental results when the internal friction angle was increased for the strip footing. Discussions are made on the reason that previous equations for the shape factor give different results and recommendations are made for the appropriate design shape factor.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.37-44
• /
• 2018

Universal soil loss equation (USLE) had been employed to estimate potential soil loss since it was developed from the statewide data measured and collected in the United States. The equation had an origin in average annual soil loss estimation though, it was modified or improved to provide better opportunities of soil loss estimation outside the United States. The equation has five factors, most studies modifying them to adapt regional status were focused on rainfall erosivity factor and cover management factor. While the conservation practice factor (USLE P factor) is to represent distinct features in agricultural fields, it is challenging to find studies regarding the factor improvements. Moreover, the factor is typically defined using slopes. The factor defining approach was suggested in the study, the approach is a step-by-step method allowing USLE P factor definition with given condition. The minimum condition is slope and field location to provide an opportunity for using in any GIS software and to reflect regionally distinct features. If watershed location, slope, crop type, and mulching type on furrows are given, detailed definition of the factors are possible. The approach was developed from field survey in South-Korea, it is expected to be used for potential soil loss using USLE in South-Korea.

• Journal of the Korean housing association
• /
• v.6 no.1
• /
• pp.31-37
• /
• 1995

The purpose of this study is to analyse the distribution of thermal sensation response and thermal environment condition in convective heating space. The contents of this study are as follows: 1)the spatial distributions of thermal conditions are measured 2)the thermal sensation vote of residents is taken in order to investigate the relation between thermal condition and human thermal sensation in sedentary condition 3)to analyse the distribution of subject's thermal sensation vote and thermal environment condition by two methods-regression method and graph method.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.2
• /
• pp.39-48
• /
• 2003

This paper present a summary of the results of statistical study of the ductility factor which is key component of response modification factor(R). To compute the ductility factor, a group of 1,860 ground motions recorded from various earthquake was considered. Based on the local site conditions at the recording station, ground motions were classified into four groups according to average shear wave velocity. Inleastic spectrum were computed for elastic perfectly plastic SDOF systems undergoing different level of inelastic deformation and period. Ductility factors were calculated by deviding elastic response spectrum by inelastic response spectrum. The influence f displacement ductility ratio, site condition, magnitude and epicentral distance on ductility factors were studied. The coefficient of variation was computed to evaluated the dispersion of ductility factors as the defined ratio of the standard deviation to the mean.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.4
• /
• pp.149-158
• /
• 2017

In general, the air-side j and f factors of evaporators or condensers are obtained through single-design tests performed under air-dry and wet-bulb temperatures. Considering that the indoor or outdoor air temperatures vary significantly during the operation of an air conditioner, it is necessary to confirm that the experimentally-obtained j and f factors are widely applicable under variable air conditions. In this study, a series of tests were conducted on a two-row slit-finned heat exchanger to confirm the applicability. The results showed that, for the dry-surface condition, the changes of the tube-side water temperature, water-flow rate, and air temperature had virtually no effect on the air-side j and f factors. For the wet condition, however, the f factor was significantly affected by these changes; contrarily, the j factor is relatively independent regarding this change. The formulation of the possible reasoning is in consideration of the condensation behavior underneath the tube. The wet-surface j and f factors are larger than those of the dry surface, with a larger amount for the f factor.

• Journal of Welding and Joining
• /
• v.6 no.3
• /
• pp.43-55
• /
• 1988

An experimental study was carried out to identify the fatigue fractue behavior of weld zone in generally rolled steel for marine structure. The bending an shear loads were applied simultaneously on the specimens to simulate real load condition for marine structure. The effect of the stress intensity factor under mode I with II loading condition on the initiation and the propagation of a crack were investigated, with particular emphaiss on mode II. When the $K_{II}$ stress intensiy factor in mode II was applied under mode I load condition, the growth behavior of a crack seems to be affected mainly by the anisotropic characteristic of materials. Especially, when the crack was located in and near the weld zone and parallel to th weld line, the propagation behaviour was turned out to be quite different from that of the base metal along the direction transverse to the weld line. In general, the propagation veiocity of the cracks in and near the weld zone was found to be slower that the velocity in base metal.

• Fisheries and Aquatic Sciences
• /
• v.26 no.3
• /
• pp.224-233
• /
• 2023

This research was conducted at Langgur City, Southeast Maluku Regency, Maluku Province, Eastern Indonesia from November 2020 to February 2021 to study biological aspects of roundscads (Decapterus spp.) which consist of species composition, sex ratio, gonad maturation level, size distribution, length-weight relationship and condition factor. Samples were collected at traditional fish market in Langgur City. Fish samples collected at the market were put into cool box and then brought to the laboratory for further examination. Fish samples were identified, separated based on species, dissected to determine their sex and gonad maturation stage and then measured. Totally, there were 290 specimen collected which consist of five species namely Decapterus kurroides, D. macarellus, D. macrosoma, D. muroadsi and D. russelli. Sex ratio between male and female for all species showed 1:1. Gonad maturation level showed that stage I and II have higher percentage than stage III and IV indicates immature fish more dominant compare to mature one. Among five species found, D. macarellus has larger size while the smaller belongs to D. muroadsi. Results of length-weight relationship analysis showed that roundscads inhabiting Southeast Maluku waters have isometric and negative allometric growth pattern with relative condition factor around 1.00.

• Journal of the Korean Geosynthetics Society
• /
• v.6 no.3
• /
• pp.9-16
• /
• 2007

Soil vapor extraction (SVE) is an effective and cost efficient method of removing volatile organic compounds (VOCs) and petroleum hydrocarbons from unsaturated soils. Incorporating PVDs in an SVE system can extend the effectiveness of SVE to lower permeability soils by shortening the air flow-paths and ultimately expediting contaminant removal. With this approach, the real bounded system is replaced for the purposes of analysis by an imaginary system of infinite areal extent. The boundary conditions for the contaminant remediation model test include constant head and no flow condition. Due to these parallel boundaries conditions, image wells should be developed in order to maintain the condition of no flow across the impermeable boundary. It is also assumed that the flow is drawdown along the constant head boundary condition. The factors contributing to the difference between the theoretical and measured pressure heads were also analyzed. The flow factor increases as the flow rate is increased. The flow rate is the most important factor that affects the difference between the measured and theoretical pressure heads.