• Journal of Arbitration Studies
• /
• v.24 no.4
• /
• pp.99-125
• /
• 2014

The purpose of this paper is to introduce the arbitral proceeding system in Indonesia. Arbitration in Indonesia is governed by Law No. 30 of 1999 on Arbitration and Alternative Dispute Resolution (Arbitration Law). Also, the Indonesian National Board of Arbitration (BANI) is the main arbitration body in Indonesia. BANI handles both domestic and international disputes. BANI has published its Rules of Arbitral Procedure (the BANI Rules). Within a period of not longer than 30 days after receiving the petition for arbitration, the respondent must submit its reply. Also, if the respondent wishes to assert against the claimant a counter-claim in connection with the dispute, the respondent may submit such counter-claim together with its statement of defense no later than the first hearing. This paper suggests that the following may be some of the disadvantages to using arbitration under the BANI Rules. The first is that final decision or approval regarding the designation of all arbitrators shall be in the hands of the Chairman of BANI. It is the chief problem facing the international stream of arbitration systems. The second is that arbitrators must have certain minimum qualifications. BANI Rules provide the same requirements for the qualifications of the arbitrators as the Arbitration Law. The third is that the BANI Rules require arbitrators in BANI-administered references to be chosen from BANI's list of arbitrators. BANI can also consider a recognized foreign arbitrator if the foreign arbitrator meets the qualification requirements and is prepared to comply with the BANI Rules. This includes the requirement that the appointing party must bear the travel, accommodation, and other special expenses related to the appointment of the foreign arbitrator.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.906-915
• /
• 2016

In this study, a network monitoring system, including a secure 460-Network and a 460-Gateway, is designed and developed according with the requirements of the IEC (International Electro-Technical Commission) 61162-460 network standard for the safety and security of networks on board ships. At present, internal or external unauthorized access to or malicious attack on a ship's on board systems are possible threats to the safe operation of a ship's network. To secure the ship's network, a 460-Network was designed and implemented by using a 460-Switch, 460-Nodes, and a 460-Gateway that contains firewalls and a DMZ (Demilitarized Zone) with various application servers. In addition, a 460-firewall was used to block all traffic from unauthorized networks. 460-NMS (Network Monitoring System) is a network-monitoring software application that was developed by using an simple network management protocol (SNMP) SharpNet library with the .Net 4.5 framework and a backhand SQLite database management system, which is used to manage network information. 460-NMS receives network information from a 460-Switch by utilizing SNMP, SNMP Trap, and Syslog. 460-NMS monitors the 460-Network load, traffic flow, current network status, network failure, and unknown devices connected to the network. It notifies the network administrator via alarms, notifications, or warnings in case any network problem occurs. Once developed, 460-NMS was tested both in a laboratory environment and for a real ship network that had been installed by the manufacturer and was confirmed to comply with the IEC 61162-460 requirements. Network safety and security issues onboard ships could be solved by designing a secure 460-Network along with a 460-Gateway and by constantly monitoring the 460-Network according to the requirements of the IEC 61162-460 network standard.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.497-502
• /
• 2008

In this paper, we studied on an attenuation effect of automobile exhaust noise according to the direction of secondary sound source in duct ANC system. Automobile exhaust noise was recorded at 800rpm. 3500rpm and 5000rpm of a diesel engine. Directions of loudspeaker(second sound source) can be exchanged to $30^{\circ}$, $90^{\circ}$ and $150^{\circ}$ against the primary noise flow by acrylic ducts to be made for experimentation. DSP board with TMS320C6416 chip of Texas Instrument Co used to control adaptive ANC system. This ANC system is based on the single-channel FxLMS algorithm. In experiment result, when the loud speaker direction was $150^{\circ}$, the attenuation effect showed largely. In case of $90^{\circ}$ duct, the noise was a little increased. In case of $30^{\circ}$ duct, the noise was a little increased or decreased according to the frequency range and the sound pressure(dB) of exhaust noise to comply with engine rpm.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.3
• /
• pp.41-51
• /
• 2020

A series of corporate failures and financial crises have raised attention to organizational governance issues, especially for financial institutions. In the banking system, corporate governance further plays a unique role because of the uniqueness of the banking organizations. Therefore, this study aims to examine the effect of corporate governance disclosure on bank performance by building a corporate governance disclosure index (CGDI) for 10 Islamic banks operating in Iran, Saudi Arabia and Malaysia. The data used in this study are secondary data taken from annual reports and sourced from the official websites of each banks include Iran Exchange, Stock Market Quotes and Financial News, and Bursa Malaysia. This study uses content analysis of the annual bank report within five years (2014-2018). The results show that Islamic banks comply with 72.4% of the attributes discussed in the CGDI. The most frequently reported and disclosed elements are board structure and audit committee. The regression results provide evidence that Islamic banks with a higher level of corporate governance disclosure reported high operating performance measured by ROA. In contrast to the expectation, the financial performance of ROE and Tobins'q are not significantly related to the disclosure of sharia bank governance.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.6
• /
• pp.299-306
• /
• 2000

The primary cause of air pollution by vehicles is imperfect combustion of fuel. One of the most usual causes of this imperfect combustion is the misfire in IC(Intenal Combustion) engine. Recently it is obligated for an ECU to monitor the emission level and warn the driver in case of exceeding specified emission standards. Therefore, in order to comply with this OBD-II regulations, car makers are investing a considerable amount into technology which would enable the detection of misfire and the particular cylinder in which misfire is taking place. So far, it has been able to detect misfire using engine speed, which can be obtained crank angle. However, such a method posed a problem in analyzing at high speed and in recognizing the misfire from the load impact at bumpy road. In this paper, misfire detection is made possible by simple arithmetic using WDFT, especially at high engine speed. In addition, the moving window method of a Walsh function is applied to determine the cylinders under misfire in case of multiple misfires. An actual experiment was conducted to prove that WDFT is applicable to effective in computation speed and to same result in misfire detection and cylinder determination at idle, part load and bumpy road conditions.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.2
• /
• pp.79-84
• /
• 2013

According to the statistics of occupational accidents in 2009, the scaffolds and work platforms were main objects causing fall accidents in construction sites. But many workers install and use the work platforms on the mobile scaffolding without considering about safety standards. We had conducted a nationwide survey about how workers obey safety standards for the work platforms of the mobile scaffolding. As the result of a survey, no one follow a gap standard between materials of work platforms and installation of toe board. And it is a low proportion that comply with the install of safety guard rails and the use of stoppers. This is lack of consciousness for the safety certification and regulations. For safe use a mobile scaffolding, It is needed to educate a manager on the safety standards and to develop a product to install and dismantle easily.

• Nuclear Engineering and Technology
• /
• v.28 no.6
• /
• pp.594-601
• /
• 1996

To assure quality of safety critical software, software should be developed in accordance with software development procedures and rigorous software verification and validation should be performed. Software verification is the formal act of reviewing, testing or checking, and documenting whether software components comply with the specified requirements for a particular stage of the development phase [1]. New software verification methodology was developed and was applied to the Shutdown System No. 1 and 2(SDS1,2) for Wolsong 2, 3 and 4 nuclear power plants by Korea Atomic Energy Research Institute(KAERI) and Atomic Energy of Canada Limited(AECL) in order to satisfy new regulation requirements of Atomic Energy Control Board(AECB). Software verification methodology applied to SDS1 for Wolsong 2, 3 and 4 project will be described in this paper. Some errors were found by this methodology during the software development for SDS1 and were corrected by software designer. Output from Wolsong 2, 3 and 4 project have demonstrated that the use of this methodology results in a high quality, cost-effective product.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.770-775
• /
• 2014

According to ICNIRP guidelines for limiting exposure to time-varying electric, magnetic and electromagnetic fields up to 300GHz, magnetic flux density which range from 3Hz to 150kHz are regulated to lower than $6.25{\mu}T$. In order to comply with its standard, OLEV(On-Line Electric Vehicle) have been designed considering EMF(Electro-Magnetic Field) reduction. However, if a current flowing in power line would be bigger for increasing power transfer efficiency, the established shield system no longer acts their role properly. In this paper, therefore, FCCL(Flexible Copper Clad Laminate) is applied to power line and pick-up devices to solve the problems. Though, the FCCL is normally utilized to insulator on circuit board, because of its high heat resistance characteristic, flexibility and thin properties, it makes effectiveness in the shielding device as well. 4 types of FCCL shielding structure are introduced to power line and pick-up devices. From the results, the FCCL which are placed in proposed positions shows maximum EMF reduction compared to the established shielding structure. Henceforth, if OLEV is applied FCCL shielding structure in practice, it will not only be more safe but also step forward to commercialization near future.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.10
• /
• pp.1054-1061
• /
• 2015

The International Maritime Organization (IMO) has been regulating emissions by making mandatory the compliance with institutions aimed at protecting air quality such as the Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and Tier III. Under the circumstances, one of the response measures considered to be the most feasible is the replacement of existing marine fuel with Liquefied Natural Gas (LNG). The industry has been preemptively building infrastructure and developing and spreading engine technology to enable the use of LNG-fueled ships. The IMO, in turn, recently adopted the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels (IGF Code) as an institutional measure. Thus, it is required to comply with regulations on safety-related design and systems focused on response against potential risk for LNG-fueled ships, in which low-flash-point fuel is handled in the engine room. Especially, the Standards of Training, Certification and Watchkeeping (STCW) Convention was amended accordingly. It has adopted the qualification and training requirements for seafarers who are to provide service aboard ships subject to the IGF Code exemplified by LNG-fueled ships. The expansion in the use of LNG-fueled ships and relevant facilities in fact is expected to increase demand for talents. Thus, the time is ripe to develop methods to set up appropriate STCW training courses for seafarers who board ships subject to the IGF Code. In this study, the STCW Convention and existing STCW training courses applied to seafarers offering service aboard ships subject to the IGF Code are reviewed. The results were reflected to propose ways to design new STCW training courses needed for ships subject to the IGF Code and to identify and improve insufficiencies of the STCW Convention in relation to the IGF Code.

• Journal of Engineering Education Research
• /
• v.3 no.2
• /
• pp.51-60
• /
• 2000

Even though Accreditation Board of Engineering Education in Korea (ABEEK) started its accreditation procedures, the faculty still have difficulties in preparing the accreditation because there are little practical examples of the preparing procedure. This paper explains the practical procedure to determine the educational objectives and the outcomes, which is the first part of the accreditation preparing procedure. The educational objectives of the program should be expressed by the specific and assessable sentences and their contents should comply with the demands of the educational community, the objectives of the educational institute, and the characteristics of the program. The program outcomes consist of 12 outcomes from ABEEK and additional outcomes that reflect the characteristics of the program. Since the educational objectives and the outcomes should have the full connection among the objectives of the institute and the course objectives, the relationships among them should be checked using the relationship analysis matrix.