• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.142-145
• /
• 1993

$TiO_2-V_2O_5$ thin films are fabricated by Sol-Gel method and humidity sensing properties have been investigated. As the results of humidity sensing properties of thin films fabricated as humidity sensor, it is confirmed to have good humidity sensing properties in high humidity and low frequency regions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.185-186
• /
• 2008

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/SiO2/Si) using RF sputtering method at various substrate temperature. The optimum conditions of RF power and Ar/O2 ratio were 60[W] and 70/30, respectively. The rougness showed about 4.33[nm]. Deposition rate of SBN thin films was about 4.17[nm/min]. The capacitance of SBN thin films were increased with the increase of substrate temperature.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1624-1626
• /
• 1996

PoIyimide thin films fabricated at substrate temperature $20^{\circ}C$, $40^{\circ}C$and $70^{\circ}C$ by vapor deposition polymerization method were confirmed by FT-IR spectra. It is found that deposition rate decreas according as increasing substrate temperature. Defusion depth of evaporation Al at which thin films be used for an insulating films between layers of semiconductor were about $300{\AA}$.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1636-1638
• /
• 1996

MMA-Styrene-Tetramethyltin(MST) thin films were fabricated by plasma polymerization method, and their electrical properties were confirmed by IR and GPC. The electrical conductivity increased with increasing temperature, and the adsorption current hardly appeared. The high-field electrical conduction mechanism is the electronic one such as schottky, and the activation energy is about 1.1 eV.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1639-1641
• /
• 1996

Polyirnide thin films were fabricated an using vapor deposition polymerization apparatus, and their FT-IR and TGA characteristics were investigated. The peaks of $720cm^{-1}$ and $1380cm^{-1}$ show C=O stretch mode and C-N stretch mode, and that of the cured polyimide at $300^{\circ}C$ were saturated. TGI(Thormogravi metric index) was showed at $459^{\circ}C$ from reaserch of thermal resistivity characteristics by TGA.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1630-1632
• /
• 1996

The static charges are generated by streaming electrification phenomena when insulating oil flowing by force for the purpose of cooling at the internal of Ultra-high power transformer. In this thesis, their elimination method was studied. In this paper the effect of Additive on the electric conductivity of Insulating oil is studied. The variation of electric conductivity disappear when Additive is molten in insulating oil, the variation of Additive is not enough to decrease streaming electrification of insulating oil(${\sigma}>10^{-12}$[S/cm]).

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.420-422
• /
• 1995

PVDF (polyvinylidene fluoride) has at least from known crystalline structure ( ; they are referred to as the $\alpha$, $\beta$, $\gamma$ and $\alpha_p$ phase or forms II, I, III and $IV_p$). In this study, the manufactured PVDF thin films through vapor deposition method had for II ( ; the substrate temperature at 30$^{\circ}C$). The dielectric behavior of poly(vinylidene fluoride) is affected by orientation and crystal modification. The very high value of the dielectric constant for high temperature conditioned film is believed to be due to the orientation effect. The loss peak caused by molecular motion of the molecules in crystalline regions.

• Korea-Australia Rheology Journal
• /
• v.19 no.2
• /
• pp.81-88
• /
• 2007

Blends of collagen dispersion (COL) with poly(vinyl alcohol) (PVA) in different weight ratios were investigated by oscillatory rheometry, Fourier transform-infrared spectroscopy and scanning electron microscopy. It was found that even with 80% of PVA, the COL/PVA blends behaved more like collagen dispersion than pure PVA solution in the dynamic thermal and frequency processing, for instance, a dominant elastic appearance (G'>G"), a similar shear thinning behavior and the thermal denaturation below $40^{\circ}C$. However, influence on the blend behaviour by PVA was noticeable, for instance, an increase of dynamic denaturation temperature, the decreasing intensity of amide I, II and III bands as well as the diminishing irregular pores on the surface of blends. The interaction between collagen and PVA could be observed, especially at the regions with low content or high content of PVA.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2388-2390
• /
• 2002

Small type electric energy saving system is proposed in this paper. The system improves power factor fastly according to load variation of each customer. Phases of voltage and current are detected as 1[ms] unit. Phase coincident algorithm is applied for power factor improvement. Capacitance is controlled for optimal power factor correction. Series reactor is controlled for harmonics reduction. Non-contact device is used for fast response and long life. Test result shows the effect of this system. Power factor of 40[W] electric fan is improved from 95[%] to 100[%]. In the case of electric light, power factor is improved from 82[%] to 100[%]. Response time for load variation is less than 1[ms].

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1537-1539
• /
• 1997

In this study, the dielectric properties of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3$ Ceramics have been investigated as a addition of the amount of $MnO_2(0{\leq}x{\leq}0.9wt%)$. The Temperature-dependant dielectric characteristics of 0.9PMN-0.1PT relaxor ferroelectric system were improved by enhencing the extent of the diffuse phase transition(DPT). The maximum dielectric permittivity decreased by substitution $MnO_2$ and the dielectric loss decreased with increasing $MnO_2$ substitution amount. It is expected decreasing in inner heat energy for temperature with increasing $MnO_2$ substitution.