• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.173-174
• /
• 2009

The SBN thin films are deposited on Pt-coated electrode(Pt/Ti/$SiO_2/Si$) using RF sputtering method at various deposition conditions. The optimum conditions of RF power and $Ar/O_2$ ratio were 60[W] and 70/30, respectively. Also, The surface rougness showed about 4.33[nm] in RF power 60[W] and $Ar/O_2$ ratio 70/30.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.98-100
• /
• 1996

In this paper, the Two-Double 1-2phase exciting driver circuit, in order to improving the starting characteristics of Linear Stepping Motor(LSM), is designed. And the static thrust forces of LSM is measured through the chopper constant current method according to the 2 phase, the Double 1-2phase, and the Two-Double 1-2phase exciting method.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.201-203
• /
• 2003

This paper presents a simple electronic stater for single phase induction motor(SPIM). To obtain a starting torque, the phase angle of the auxiliary winding is controlled using simple gate trigger control circuit. Because of this electronic stater circuit consists of some passive element and switching device, it is simple and robust. The experimental result shows some good results, and verifies the proposed electronic starter.

• BMB Reports
• /
• v.30 no.2
• /
• pp.162-165
• /
• 1997

RNA I. a negative controller of ColE1-type plasmid replication, is metabolized by several RNases in Escherichia coli. Two small derivatives of RNA I are accumulated at nonpermissive temperatures in an E. coli strain carrying the rnpA49 mutation, a thermosensitive mutation in the rnpA gene encoding the protein component of RNase P. A primer extension analysis was carried out to compare 5' processing of RNA I in the E. coli rnpA49 cells at both permissive and nonpermissive temperatures. Derivatives of RNA I having different 5' ends were observed in the cells grown at permissive and nonpermissive temperatures. Some of the derivatives may be generated by the cleavage of RNase P.

• Annals of Clinical Neurophysiology
• /
• v.20 no.2
• /
• pp.89-92
• /
• 2018

Ullrich congenital muscular dystrophy (UCMD) is caused by mutations in one of three genes encoding collagen VI. Although UCMD usually shows an early onset, progressive weakness, contractures and hyperlaxity of the joints, and respiratory failure, it is well known to exhibit a wide spectrum of clinical severities. The severities of the phenotypic subtypes are mainly divided according to the ambulation status. We report a patient with the early-severe phenotype of UCMD who was diagnosed by the detection of novel recessive mutations in COL6A1.

• The Korean Journal of Quaternary Research
• /
• v.8 no.1
• /
• pp.33-42
• /
• 1994

The study area is filled up by alluvium which can be classified into lower and upper beds by the facies of deposits and their degree of weathering. The lower bed is not of marine but of fluvial. The upper bed is mainly composed of clay and silt or fine sand beds col-ored dark or dark gray which are of neritic or brackish yielding mollusca fossils. The oyster(Crassostrea ariakensis) obstained from the depth of 3m below the present sea level in the upper bed was dated at 4,100 110Y.B.P. and the veneridae(Meretrix lamarck) 1m height above the present delta plain in the old sand bar was dated at 1,700 85Y,B,P. It is therfore concluded that the study area a small kern col of terrestri-al basin prior to postglacial age had experienced the Holocene transgression. Consequently the study area is considered to have been progressively formed under neritic or brackish circumstance before 1,700Y.B.P.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.298-299
• /
• 2006

본 연구에서는 전면 발광 OLED용 투명 금속 전극 소자의 제조를 위해 Al과 Ag 재료를 가지고 박막의 두께에 따른 투과도와 면저항을 조사하였다. Al 금속 재료의 박막 두께가 30nm에 따른 면저항값은 $8{\Omega}/{\square}$로 조사되었고, 70% 이상의 투과도를 가진 금속의 두께는 10nm 이상으로 조사되었다. Ag 금속 재료의 최적의 두께 25nm에 따른 면 저항값는 $4.5{\Omega}/{\square}$로 조사되었고, 70% 이상의 투과도를 가진 Ag 금속의 두께는 5nm 이하로 조사되었다.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.50-51
• /
• 2006

The nanofibrous scaffolds were obtained by co-electrospinning PHBV and collagen Type I in HIFP. The resulting fiber diameters were in the range between 300 and 600 nm. The nanofiber surfaces were characterized by ATR-FTIR, ESCA and AFM. The PHBV and collagen components of the PHBV-Col nanofibrous scaffold were biodegraded by PHB depolymerase and a collagenase Type I aqueous solution, respectively. It was found, from the cell-culture experiment, that the PHBV-Col nanofibrous scaffold accelerated the adhesion of the NIH 3T3 cell compared to the PHBV nanofibrous scaffold, thus showing a good tissue engineering scaffold.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.543-546
• /
• 2004

Bias and frequency-dependent impedance is a technique for the investigation of complex conductivity. At low frequency, complex impedance is dominated by resistive component, and at high frequency by capacitive component. We are going to present the results of the bias and frequency-dependent complex impedance in the device structure of $ITO/Alq_3/Al$ in the temperature range between 10K and 300k. And we will show to change radius of Cole-Cole plot. It will be decrease resistance by temperature. Also equivalent electrical circuit and dielectric relaxation can be accomplished by using the complex impedance analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.142-145
• /
• 1993

$TiO_2-V_2O_5$ thin films are fabricated by Sol-Gel method and humidity sensing properties have been investigated. As the results of humidity sensing properties of thin films fabricated as humidity sensor, it is confirmed to have good humidity sensing properties in high humidity and low frequency regions.