• 전기기술인
• /
• 통권350호
• /
• pp.21-25
• /
• 2011

전기설비에 접근하여 활선작업을 수행하는 과정에서 "안전조치, 작업공구, 먼지, 분진, 쥐, 절연" 등의 문제로 기인하는 단락사고가 발생하면 플라즈마(plasma) 아크 형태의 전기적 방전이 일어나므로, 아크 플래시 위험에 노출된 작업자는 심각한 화상은 물론 생명에 위험을 초래할 수 있다. 이러한 위험으로부터 근로자를 보호하기 위하여 IEEE Std. 1584에 수행절차와 방법에 대하여 상세히 해설하고 있고, NFPA 70E는 보호기준 등을 규정하고 있다. 국내에서도 이 기준 등을 참고하여 산업안전기준에 관한 규칙에 의거, 활선작업 및 활선근접작업에 관한 기술지침(KOSHA CODE E-3G-2005)과 난연성 전기 작업복 선정에 관한 기술지침(KOSHA CODE E-32-2006을 규정하고 있다. 그러나 국내에서는 외국 기업 일부를 제외하고는 아크 플래시 위험분석 업무를 실무에 적용하는 사례를 찾아보기 어렵다. 또한 적용 범위에 있어서도 난연성 전기 작업복 선정에 관한 기술지침을 600V 이상의 활선작업 및 활선근접 작업시만 착용하도록 한정한 것은 아크 플래시 위험에 대한 보호가 충분하지 않은 것으로 판단된다. 오히려 고압보다도 저압회로 고장 지점의 최소 단락전류에서 차단기의 동작시간이 지연되는 경우, 사고에너지를 더 증가시키기 때문에 위험성과 빈도는 높아질 수 있다 이와 관련하여 본문에서는 "아크 플래시 위험" 분석 및 평가방법에 대하여 살펴보기로 한다.

• 한국분무공학회지
• /
• 제15권4호
• /
• pp.170-176
• /
• 2010

This paper describes the grid-size dependency of the conventional Eulerian-Lagrangian method to spray characteristics such as spray penetration and SMD in modeling DME sprays. In addition, the reduction of the grid-size dependency of the present Gas-jet model was investigated. The calculations were performed using the KIVA code and the calculated results were compared to those of experimental result. The results showed that the conventional Eulerian-Laglangian model predicts shorter spray penetration for large cell because of inaccurate calculation of momentum exchange between liquid and gas phase. However, it was shown that the gas-jet model reduced grid-size dependency to spray penetration by calculating relative velocity between liquid and ambient gas based on gas jet velocity.

• International Journal of Reliability and Applications
• /
• 제9권1호
• /
• pp.53-70
• /
• 2008

In this paper, we discuss the plethora of uses for the software package R, and focus specifically on its helpful applications in reliability data analyses. Examples are presented; including the R coding protocol, R code, and plots for various statistical as well as reliability analyses. We explore Kaplan-Meier estimates and maximum likelihood estimation for distributions including the Weibull. Finally, we discuss future applications of R, and usages of quantile regression in reliability.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.847-852
• /
• 1995

A shielding analysis for KSC-7, the shipping cask for transporting the 7 PWR spent fuel assemblies, has been carried out. Radiation source term has been calculated on spent fuel with burnup of 50,000 MWD/MTU and 1.5 years cooling time by ORIGEN2 code. The shielding calculation for the cask has been made by using MCNP4A code with continuous cross section data library from ENDF/B-V. As a result of neutron dose rate analysis, another shielding calculational model on spent fuel shipping cask was provided which is using the Monte Carlo method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.470-480
• /
• 2008

After 1th line was built in 1974, the history of subway in Korea has been expended to 9th line which is under construction. It is time to prepare nation wide subway grounding system urgently according to the domestic electric standard that aligns to world wide standard by WTO/TBT treat (1995). Newly added grounding system to the fundamentally different system caused many problems. PSD(platform screen door) and other newly added equipment are also need grounding system. By the electrical code(established by Korea Electric Association), low voltage equipment(including grounding system) under 1,000V AC are in the process of change into IEC 60374. IEC 60364 standard will be added to the electrical code(established by Korea Electric Association) in 2007 and amended and after 3-5 years later, it will become a complete IEC 60364. So the purpose of this study is to compare the domestic rail road grounding system and suggest the standardized grounding system for the newly built subway.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.169-174
• /
• 1998

An 1200-day time-dependent fuel-management for the transition from 37-element fuel to CANFLEX-NU fuel in a CANDU 6 reactor has been simulated to show the compatibility of the CANFLEX-NU fuel with the reactor operation. The simulation calculation were carried out with the RFSP code, provided by cell averaged hel properties obtained from the POWDERPUFS-V code. The refueling scheme for both fuels was an eight bundle shift art a time. The simulation results show that the maximum channel and bundle powers were maintained below the licence limit of the CANDU 6. This indicates that the CANFLEX-NU fuel bundle is compatible with the CANDU 6 reactor operation during the transition period.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.465-466
• /
• 2006

In this paper, novel analog duty cycle corrector (DCC) with a digital duty error detector is proposed. The digital duty error detector measures the duty error of the clock and converts it into a digital code. This digital code is then used to accurately correct the duty ratio by adaptively steering the charge-pump current. The proposed duty cycle corrector was implemented using an 80nm DRAM process with 1.8V supply voltage. The simulation result shows that the proposed duty cycle corrector improves the settling time up to $70{\sim}80%$ at 500MHz clock frequency for the same duty correction accuracy as the conventional analog DCC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.180-181
• /
• 2006

In this paper, there have been brief review about the important consideration in laboratory planning and construction of the reliability assessment infrastructure including 400 kV, 120 kVA AC test system, which enable to evaluate the HV long-term overcharged withstand performance for spacers using in Gas Insulated Switchgears up to transmission class, Also it is described simply about its trial running of the whole test system and its assessment example. To inform the founded national code, RS C 0084, and the procedure for getting a reliability assessment certificate issued by the government, brief description of the code and summation of test results have been conducted.

• Structural Engineering and Mechanics
• /
• 제31권2호
• /
• pp.225-235
• /
• 2009

The present paper reviews the shear design (of reinforced concrete beam) provisions of four different national codes and proposes a new but simplified shear strength empirical expression, incorporating variables such as compressive strength of concrete, percentage of longitudinal and vertical steel/s, depth of beam in terms of shear span-to-depth ratio, for reinforced concrete (RC) beams without shear reinforcement. The expression is based on the experimental investigation on RC beams without shear reinforcement. Further, the comparisons of shear design provisions of four National codes viz.: (i) IS 456-2000, (iii) BS 8110-1997, (iv) ACI 318-2002 (v) EuroCode-2-2002 and the proposed expression for the prediction of shear capacity of normal beam/s, have been made by solving a numerical example. The results of the numerical example worked out suggest that there is need for revision in the shear design procedure of different codes. Also, the proposed expression is less conservative among the IS, BS & Eurocode.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.550-559
• /
• 2004

Theoretical studies have been carried out to examine the influence of the grain geometry-dependent driving forces, which control the internal flow pattern of solid rockets. Numerical studies have been executed with the help of a two-dimensional code. This code solves standard k-omega turbulence equations using the coupled second order implicit unsteady formulation. It has been concluded that the grain port divergence angles have significant leverage on the formation of recirculation bubbles leading for pressure oscillations, flow separation and reattachment. In solid rockets flow reattachment will favour secondary ignition and that will add to the complexity of the starting transient prediction.