• 제목/요약/키워드: CODE V

검색결과 736건 처리시간 0.028초

말단선량계의 광자선량당량환산인자에 대한 이론적 계산 (A Theoretical Calculation of Photon Dose Equivalent Conversion Factor For Extremity Dosimeter)

  • 김광표;이원근;김종수;윤여창;윤석철
    • Journal of Radiation Protection and Research
    • /
    • 제21권1호
    • /
    • pp.41-50
    • /
    • 1996
  • 중성자 및 전자 그리고 광자 수송코드인 MCNP 4A코드를 이 용하여 ANSI N13.32에 제안된 말단팬텀과 한국원자력연구소 제작한 말단팬텀 각각에 대하여 감마선량당량환산인자를 커마근사법에 근거하여 계산하였다. 본 계산은 $15keV{\sim}1.5MeV$ 에너지영역에 대해 단일광자에너지 선원을 고려하였으며 이러한 단일광자에너지함수로서 계산한 공기커마에 대한 선량당량의 비로서 선량당량환산인자를 이론적으로 도출하였다. 본 연구에서 이론적 방법으로 도출한 ANSI와 KAERI의 말단팬텀 각각에 대한 광자선량당량환산인자를 ANSI N13.32의 실험적 방법에 의해 제시된 값들과 비교한 결과 50keV 이상의 단일 광자에너지영역에서는 실험적 방법에 의한 값들과 최대차이 5.7% 내에서 잘 일치함을 보였다. 그러나 40 keV 이하의 에너지영역에서는 본 연구의 계산 결과가 최대 13.6%까지 낮게 평가됨을 알 수 있었으며, 이러한 차이는 낮은 에너지영역에서 두드러지는 단일에너지의 생성과 관련된 실험의 불확실성과 MCNP코드에서 모사한 Geometry의 영향에 기인하는 것으로 사료된다.

  • PDF

Monte Carlo N-Particle Extended Code를 이용한 연 X선 정전기제거장치의 최적제작에 관한 연구(II) (A Study on the Optimal Make of X-ray Ionizer using the Monte Carlo N-Particle Extended Code(II))

  • 정필훈;이동훈
    • 한국안전학회지
    • /
    • 제32권6호
    • /
    • pp.29-33
    • /
    • 2017
  • In order to solve this sort of electrostatic failure in Display and Semiconductor process, Soft X-ray ionizer is mainly used. Soft X-ray Ionizer does not only generate electrical noise and minute particle but also is efficient to remove electrostatic as it has a wide range of ionization. There exist variable factors such as type of tungsten thickness deposited on target, Anode voltage etc., and it takes a lot of time and financial resource to find optimal performance by manufacturing with actual X-ray tube source. Here, MCNPX (Monte Carlo N-Particle Extended) is used for simulation to solve this kind of problem, and optimum efficiency of X-ray generation is anticipated. In this study, X-ray generation efficiency was compared according to target material thickness using MCNPX and actual X-ray tube source under the conditions that tube voltage is 5 keV, 10 keV, 15 keV and the target Material is Tungsten(W). At the result, In Tube voltage 5 keV and distance 100 mm, optimal target thickness is $0.05{\mu}m$ and fastest decay time appears + decay time 0.28 sec. - deacy time 0.30 sec. In Tube voltage 10keV and distance 100 mm, optimal target Thickness is $0.16{\mu}m$ and fastest decay time appears + decay time 0.13 sec. - deacy time 0.12 sec. In the tube voltage 15 keV and distance 100 mm, optimal target Thickness is $0.28{\mu}m$ and fastest decay time appears + decay time 0.04 sec. - deacy time 0.05 sec.

복제 V-I 변환기를 이용한 3.3V 30mW 200MHz CMOS 업 컨버젼 믹서 (A 3.3V 30mW 200MHz CMOS upconversion mixer using replica transconductance)

  • 권종기;김욱;오창준;이종렬;송원철;김경수
    • 한국통신학회논문지
    • /
    • 제22권9호
    • /
    • pp.1941-1948
    • /
    • 1997
  • Code Division Multiple Access(CDMA) 통신방식을 채택한 휴대용 이동전화기의 중간주파수(intermediate frequency: IF) 아날로그 IC의 송신부를 구성하고 있는 저전력 선형특성을 지닌 CMOS 업 컨버젼 믹서(upconversion mixer)의 설계, 제작 및 특성 측정에 대해 기술하였다. 업 컨버젼 믹서의 구조는 복제 V-I 변환기를 사용하여 그 선형성을 확장한 형태의 회로기술을 채택하였다. 설계된 업 컨버젼 믹서는 $0.8{\mu}\textrm{m}$ N-well CMOS 2-poly/2-metal 공정기술을 사용하여 IC로 구현하였으며 그 크기는 $0.53mm{\times}0.92mm$이다. 소비전력은 3.3V 공급전원과 130MHz Local Oscillation(LO) 클럭이 인가되었을 때 30mW이다. 출력의 1dB compression 특성은 2-tone 입력신호가 인가되고 $25{\Omega}$ 부하를 가질 때에 -28dBm이다.

  • PDF

50 MeV 사이클로트론 조사 서비스로 인한 방사화 평가 (Evaluating Activation for 50 MeV Cyclotron Irradiation Service using Monte Carlo Method and Inventory Code)

  • 김상록;김기섭;허재승;안윤진
    • 한국방사선학회논문지
    • /
    • 제15권4호
    • /
    • pp.415-427
    • /
    • 2021
  • 한국원자력의학원에서는 50 MeV 사이클로트론의 빔 라인을 이용하여 연구자들에게 다양한 빔 조사 서비스를 수행하고 있다. 특히 중성자 빔 서비스는 양성자와 베릴륨의 핵반응을 이용하기 때문에 높은 전류를 사용하므로 조사 시료의 방사화 가능성이 높아진다. 본 연구에서는 연구자들이 선호하는 35 MeV 20 ㎂ 중성자 빔 서비스에 의해 발생 가능한 방사화에 대해 MCNP 6.2와 FISPACT-II 4.0을 이용해 평가했다. 평가결과 철, 구리, 텅스텐 시료는 1시간 이상 조사하는 경우 장반감기 핵종이 생성되는 방사화가 발생하여 자체처분농도를 초과했다. 매일 2시간 사용 조건에서 건축물에 대한 방사화는 발생하지 않았고 조사실 내부 공기의 방사화로 인한 종사자의 내부피폭은 매우 미비했고, 이 공기를 배기하는 경우 배출기준도 만족했다.

Rayleigh Fading AWGN채널에 대한 Dual-K길쌈부호의 평균자승오차 (MSE of Dual-k Convolutional Codes for an AWGN Channel with Rayleigh Fading)

  • 문상재
    • 한국통신학회:학술대회논문집
    • /
    • 한국통신학회 1986년도 춘계학술발표회 논문집
    • /
    • pp.1-3
    • /
    • 1986
  • We are concerned with transmitting numerical source data of {0, 1, 2, ..., 2k-1} through a channel coding system. The rate 1/v dual-k convolutional code with the orthogonal MFSK modulation and the Viterbl decoding is employed for the implementation of the channel coding system. The mean square error of the dual-k convolutional code is evaluated for the numerical source transmitted over an additive white Gaussian noise channel with Rayleigh fading.

  • PDF

Calculation of gamma buildup factors for point sources

  • Kiyani, Abouzar;Karami, Abbas Ali;Bahiraee, Marziye;Moghadamian, Hossein
    • Advances in materials Research
    • /
    • 제2권2호
    • /
    • pp.93-98
    • /
    • 2013
  • Objective of this study is to calculate gamma buildup factors for pointed and isotropic gamma sources in depleted uranium, uranium dioxide, natural uranium, tin, water and concrete using MCNP4C code. The thickness of the media ranges from 0.5 to 10 mean-free-path (mfp) and gamma energy ranges from 0.5 to 10 MeV. Owing to the outstanding accuracy of MCNP in calculation involving gamma interaction, results fairly match those reported previously. The maximum relative error is 2%.

이중 구조의 X선 차폐시트 설계를 위한 FLUKA 수송코드의 신뢰성 검증 (Reliability Verification of FLUKA Transport Code for Double Layered X-ray Protective Sheet Design)

  • 강상식;허승욱;최일홍;전제훈;양승우;김교태;허예지;박지군
    • 한국방사선학회논문지
    • /
    • 제11권7호
    • /
    • pp.547-553
    • /
    • 2017
  • 현재 의료분야에서는 방사선 차폐체로서 납(Pb)이 널리 쓰이고 있다. 하지만 납은 무게가 매우 무거워 납치마 등의 방호복은 장시간 착용이 어려우며, 인체에 치명적인 납 중독의 위험이 상시 가지고 있다는 문제점을 가지고 있다. 이러한 문제점을 해결하고자 납을 대체 할 수 있는 물질에 대한 많은 연구가 진행되고 있다. 현재 납의 대체물질로써 대표적인 바륨(Ba)과 요오드(I) 등은 우수한 차폐능을 가지고 있지만, 30keV 근처의 에너지 영역에서 특성 X선을 방출하는 특성을 가지고 있다. 환자나 방사선 종사자의 경우 차폐체를 인체에 접촉하고 있는 경우가 많으므로 차폐체에서 발생되는 특성 X선이 인체에 직접 조사되어 방사선 피폭을 증가시킬 위험이 매우 높다. 본 연구에서는 바륨(Ba)과 요오드(I)등에서 발생되는 특성 X선을 제거하기에 적절한 이중구조 차폐체를 방사선 수송코드 중 하나인 FLUKA 수송코드를 개발하여 선행연구로서 진행된 MCNPX 시뮬레이션과 비교 분석하여 이중구조 차폐체의 차폐율에 대한 신뢰성을 검증하고자 하였다. MCNPX와 FLUKA를 이용하여 황산바륨($BaSO_4$)과 산화비스무스($Bi_2O_3$)로 이루어진 다양한 두께조합의 이중구조 차폐체를 설계하였으며, IEC61331-1에 제시된 모식도를 기하학적으로 동일하게 시뮬레이션 상에 구현하였다. 또한, 120 kVp의 연속 X선 스펙트럼에 대한 차폐체의 투과스펙트럼과 흡수선량을 납과 비교 평가하였다. 평가결과, $0.3mm-BaSO_4/0.3mm-Bi_2O_3$$0.1mm-BaSO_4/0.5mm-Bi_2O_3$ 구조에서는 33 keV와 37 keV의 특성 X선을 모두 흡수하였으며, 90 keV 이상의 고에너지 X선에 대해서도 납과 거의 유사한 차폐효율을 보였다. 또한, FLUKA의 수송코드는 33 keV 이하에서는 cut-off 가 발생하여 저에너지 X선 광자에 대한 전산모사에 제약이 있지만, 40 keV 이상의 고에너지 영역에서 MCNPX와의 상대오차가 6 % 이내로 신뢰성이 매우 우수하다는 것을 확인할 수 있었다.

Ti-6Al-4V 고강도 볼트 성형 기술 개발 (Hot Forging Process of High Strength Ti-6Al-4V Bolt)

  • 김정한;이채훈;홍재근;김재호;염종택
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2008년도 추계학술대회 논문집
    • /
    • pp.87-90
    • /
    • 2008
  • Since fastener bolt for airplane require high specific strength and corrosion resistance, Ti-6Al-4V alloy is widely used. However, the Ti-6Al-4V bolt is generally manufactured by cutting and rolling because of their poor workability. The aim of present work is to develop hot forming technology for high strength Ti-6Al-4V. Various heat-treatments were applied to specimen in order to increase hot-workability and prevent galling with die Multiple forging were simulated with FE code to determine optimum process parameters including specimen temperature, strain rate, local strain, and thermal shrinkage. Forged samples were heat-treated again to increase their mechanical properties.

  • PDF

Ti-6Al-4V 고강도 볼트의 성형성에 미치는 표면산화효과 (Effect of Thermal Oxidation Coating on the Hot Forging Process of High Strength Ti-6Al-4V Bolt)

  • 김정한;이채훈;홍재근;김재호;염종택
    • 소성∙가공
    • /
    • 제18권3호
    • /
    • pp.251-255
    • /
    • 2009
  • Since fastener bolt for airplane require high specific strength and corrosion resistance, Ti-6Al-4V alloy is widely used. However, the Ti-6Al-4V bolt is generally manufactured by cutting and rolling because of their poor workability. The aim of present work is to develop hot forming technology for high strength Ti-6Al-4V. Various heat-treatments were applied to specimen in order to increase hot-workability and prevent galling with die. Multiple forging were simulated with FE code to determine optimum process parameters including specimen temperature, strain rate, local strain, and thermal shrinkage. Forged samples were heat-treated again to increase their mechanical properties.