• Title/Summary/Keyword: CO-I

Search Result 5,525, Processing Time 0.033 seconds

The Effects of CO2 Enrichment on the Radial Growth of Pinus densiflora

  • En-Bi CHOI;Hyemin LIM;Jeong-Wook SEO
    • Journal of the Korean Wood Science and Technology
    • /
    • v.52 no.3
    • /
    • pp.289-299
    • /
    • 2024
  • The current study aimed to investigate the impact of CO2 enrichment on the width of annual tree rings, earlywood and latewood, and the area of annual growth of Pinus densiflora Siebold & Zucc. grown in open-top chamber (OTC). To this end, two CO2 enrichment cases were considered, namely 1.4 × increment (560 ppm in OTC-II) and 1.8 × (720 ppm in OTC-III) were compared with the current atmosphere (400 ppm in OTC-I). The CO2 enrichment conditions for a period of 12 years (2010-2021) were considered, and all measurements were done through image analysis. The study showed that the increment in CO2 concentrations positively affected the tree growth. The measurement data from the trees in OTC-III were considerably higher than those from OTC-I, whereas those from OTC-II were slightly higher than those from OTC-I. Decreasing patterns of the measured widths and area in 6-7 years after the beginning of CO2 enrichment was found for all the OTCs. These patterns were possibly due to changes in the physiological features, such as aging. The findings of the present study can have potential uses as fundamental data for forest management considering CO2 concentrations.

Wafer-Level CSP(Omega CSP)

  • Park, I.S.;Kang, I.S.;Kim, J.H.;Kim, J.Y.;Cho, S.J.;Park, M.G.;Chun, H.S.;Kih, J.S.;Hun, H.;Yu, J
    • Proceedings of the International Microelectronics And Packaging Society Conference
    • /
    • 2000.10a
    • /
    • pp.195-201
    • /
    • 2000
  • Current Status: Good Electrical performance for high speed device, Solder joint reliability-Passed 1600 cycles for 4M SRAM(3.27mm DNP),-Passed 400 cycles for large die(5.71 mm DNP), Future Plan: Improving Board Level Reliability for large die size, Lead free solder evaluation.

  • PDF

Msp I RFLP of the Human Apolipoprotein AI Gene in Korean Elite Athletes

  • Kang, Byung-Yong;Lee, Kang-Oh;Oh, Sang-Duk;Bae, Joon-Seol;Yoon, Tae-Joong;Jeong, Han-Min;Kim, Ki-Tae
    • Environmental Mutagens and Carcinogens
    • /
    • v.22 no.4
    • /
    • pp.243-247
    • /
    • 2002
  • Prolonged exercise is known to increase steady-state serum high-density lipoprotein cholesterol (HDL-cholesterol) and apolipoprotein AI(apo AI) concentrations. We investigated the effect of adaptation to endurance exercise on the association of the genetic polymorphism in the apo AI gene with these biochemical parameters. 108 male subjects were randomly selected from a group of elite athletes, and 65 male samples used as sedentary control group from Korean general population. The genetic polymorphism in the apo AI gene locus was detected by polymerase chain reaction(PCR) and DNA digestion with Msp I restriction endonuclease. The genotype frequency for the Msp I RFLP was significantly different between the elite athletes and sedentary controls(P<0.05). There were, however, no significant associations between the Msp I RFLP of the apo AI gene and the biochemical parameters in elite athletic group. Therefore, our findings indicate that the Msp I RFLP of the apo AI gene was not associated with the serum apo AI and HDL-cholesterol concentrations in Korean male elite athletes.

  • PDF

A Study on the Indoor Air Pollution Levels in the Classrooms at Public Schools in Suwon (수원지역 초.중.고등학교 교실의 실내 공기오염도에 관한 연구)

  • 신은상;김진우
    • Journal of environmental and Sanitary engineering
    • /
    • v.17 no.1
    • /
    • pp.20-27
    • /
    • 2002
  • This study has researched the indoor air Pollution in the school classrooms. It focused on the school classrooms in which the students take part in many loaming activities for a long time, not focused on the offices or underground facilities that have occupied the interest so far. First, I investigated the origination sources of indoor air pollution which influences on our health, and researched the data on the consequences of it on the human body. Second, I measured the indoor air Pollution level of the classrooms in which the students take part in activities. I selected CO, $CO_2,{\;}SO_2,{\;}NO_2$and $PM_{10}$ as the research items. Each two schools were chosen in the elementary schools, middle schools and high schools as the ones for measurement. And I distinguished the boys' schools from the girls' schools in the middle and high schools. CO, $SO_2{\;}and{\;}NO_2$were comparatively low comparing with the recommendation of the Ministry of Environment. But, $CO_2{\;}and{\;}PM_{10}$ exceeded the standard concentration in most schools and there was a difference between boys'classrooms and girls'classrooms about them. Also, it was different by the number of members a classrooms. Third, I made a questionnaire on the on the indoor air pollution. The questionnaire showed that many students feel the indoor air pollution directly and they are under the influence of it.

A Study on the Fabrication of CsI(T1) Radiation Sensor and its Spectroscopic Characteristics (CsI(T1) 방사선센서의 제작 및 분광특성 연구)

  • 권수일;신동호
    • Progress in Medical Physics
    • /
    • v.13 no.1
    • /
    • pp.44-50
    • /
    • 2002
  • CsI(T1) single crystal was grown in a Bridgman growing apparatus, which has the diameter of 11 mm and the mole ratio of 0.001 mol%. Radiation sensors were made with CsITl)crystal and two photodiodes, and measured spectroscopic characteristics and linearity for gamma-ray and X-ray. The energy resolution of CsI(T1) radiation sensor has been measured with $^{22}$ Na, $^{137}$ Cs and $^{60}$ Co gamma standard sources. Also output linearity of CsITl) sensor was measured for diagnostic radiation region. The energy resolutions of CsI(T1) radiation sensor for 0.511MeV gamma-ray from Na-22 source, 0.662MeV from Cs-137 source, and 1.17MeV and 1.332MeV from Co-60 source were 13.2%, 8.3%, 6.7%, and 5.1% respectively. Also the output linearity up to 80mAs current for 60kVp, 80kvp, 100kVp, 120kVp tube voltages has been studied.

  • PDF

Study on Discharging Agent for Discharge Printing of Fabrics Dyed with Vinylsulfonyl Reactive Dyes ―Discharge Possibility of Some Chemicals― (부가형 반응염료로 염색된 면직물의 발염에 있어 발염제에 관한 연구 -여러가지 약제들에 의한 발염 가능성-)

  • Park, Geon Yong;Ro, Duck Kil
    • Textile Coloration and Finishing
    • /
    • v.8 no.1
    • /
    • pp.1-7
    • /
    • 1996
  • In discharge printing of cotton fabrics dyed with C.I. Reactive Orange 16(O-16), C.I. Reactive Blue 19(B-19) and C.I. Reactive Black 5(Bl-5), when the dyes were discharged by some chemicals, such as $K_{2}CO_{3}$, BASB, DSR, sarcosine and GSB, the single use of those chemicals made a very poor discharge, but mixing them with $K_{2}CO_{3}$ resulted to the outstanding improvement of discharge. Especially the dischargeability of $K_{2}CO_{3}$ BASB or $K_{2}CO_{3}$+DSR was very gratifying. For O―16, $K_{2}CO_{3}$+ DSR was slightly more effective than $K_{2}$CO$_{3}$+BASB, but for B―19 and Bl―5 $K_{2}CO_{3}$+BASB and $K_{2}CO_{3}$+DSR showed similar good results. In discharging of O―16 and B―19 by $K_{2}CO_{3}$+BASB or $K_{2}CO_{3}$ +DSR, the dischargeabilities of them increased as the time of 102$^{\circ}C$ steaming increased under the condition of 102$^{\circ}C$ steaming and no baking, but not under the condition of 102$^{\circ}C$ steaming and 16$0^{\circ}C$ baking. However for Bl-5, without regard to baking, the 102$^{\circ}C$ steaming of more than 15 minutes caused the discharge to be much more remarkable than that of 8 minutes did. Generally baking elevated the dischargeability, and this was sure in discharging by $K_{2}CO_{3}$+BASB or $K_{2}CO_{3}$+DSR. And it was confirmed that the structure of vinylsulfonyl reactive dyes could effect on the dischargeability because the three dyes, though little, showed different discharge behaviors.

  • PDF

Reduction Effect of CO2 Discharge of Green PC (그린 PC의 탄소(CO2) 배출량 감축효과)

  • Kim, Young-Geil
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.39C no.2
    • /
    • pp.115-121
    • /
    • 2014
  • Since the rapid development of information age and information technology might be considered to cause environmental problems, Green IT is perceived as core technology for low carbon green growth and the minimum waste of electricity. In this vein, Green IT is becoming new paradigm of focusing on natural environment. This study examines current various IT required for green growth, and studies various methods for diminution of carbon discharge in Korea and other countries. Especially, it focuses on the diminution effect of carbon discharge by using Green PC, and compares the difference of voltage, voltaic current, and the use of electricity between Normal PC and Green PC by using HPM-300A, and measures carbon discharge of Normal PC and Green PC. The result shows that the diminution effect of $CO_2$ discharge of Green PC is amount to 11.5Kg per year, and the effect of green growth is up to the conservation of 2 or 3 pine trees.

Ligand Design of 5,5'-Diphenylimidazolidine-2,4-dione Analogues as A New Class of Potent Inhibitors of Fatty Acid Amide Hydrolase (새로운 Fatty Acid Amide Hydrolase 저해제로서 5,5'-Diphenylimidazolidine-2,4-dione 유도체의 리간드 설계)

  • Cho, Jong-Un;Soung, Min-Gyu;Sung, Nack-Do
    • Applied Biological Chemistry
    • /
    • v.51 no.2
    • /
    • pp.119-123
    • /
    • 2008
  • 3D-QSARs (3 dimensional quantitative structrue-activity relationships) on the inhibition activities of 3-substituted-5,5'-diphenylimidazolidine-2,4-dione derivatives (1-22) against FAAH (fatty acid amide hydrolase) were studied quantitatively using CoMFA (comparative molecular field analysis) and CoMSIA (comparative molecular similarity indice analysis) methods. The statistical results of the CoMFA 1A and CoMSIA 2F model are better predictability and fitness. And also, the designed X=I, Y=$N_{2}^{+}$-substituent (P1: $Pred.pI_{50}$=6.55), according to the contour maps with information of the two models, showed the most inhibition activity against FAAH.

Synthesis, Structural Characterization and Thermal Behaviour of Block Copolymers of Aminopropyl-Terminated Polydimethylsiloxane and Polyamide Having Trichlorogermyl Pendant Group (Aminopropyl-Terminated Polydimethylsiloxane과 Trichlorogermyl 곁가지 그룹을 갖는 Polyamide 블록공중합체의 합성, 구조분석 및 열적거동)

  • Gill, Rohama;Mazhar, M.;Mahboob, Sumera;Siddiq, Muhammad
    • Polymer(Korea)
    • /
    • v.32 no.3
    • /
    • pp.239-245
    • /
    • 2008
  • Block copolymers of the general formula $[(-CO-R'-CO-HN-Ar-NH-CO-R'-CO)_xNH(CH_2)_3-(Me_2SiO)_y(CH_2)_3NH_2]_n$, [n=18.00 to 1175.0] where $R'=CH_2CH(CH_2GeCl_3)$;$CH_2CHGeCl_3CH_2$; and $Ar=-C_6H_4$;$-(o.CH_3C_6H_4)_2$;$-o.CH_3OC_6H_4)_2$;$-(o.CH_3C_6H_4)$ were prepared by a polycondensation reaction of polyamide containing a pendant trichlorogermyl group and terminal acid chloride $Cl(-CO-R'-CO-NH-Ar-NH-CO-R'-CO-)_xCl$ with aminopropyl-terminated polydimethylsiloxane $H_2N(CH_2)_3(Me_2SiO)_y-(CH_2)_3NH_2]$, (PDMS). These polymers were characterized by elemental analysis, $T_g$, FT-IR, $^1H$-NMR, solid state $^{13}C$-NMR, and molecular weight determination. The thermal stability of these copolymers was examined using thermal analysis techniques, such as TGA and DSC. Their molecular weights as determined by laser light scattering technique ranged $5.13{\times}10^5$ to $331{\times}10^5\;g/mol$. These polymers display their $T_g$ in the range of 337 to $393^{\circ}C$ with an average decomposition temperature at $582^{\circ}C$.

Synthesis Study of CF$_3$I and $C_2$F$_{5}I$ from Halon-1301 (하론-1301로부터 CF$_3$I와 $C_2$F$_{5}I$ 의 합성)

  • 김재덕;임종성;이윤우;이윤용
    • Fire Science and Engineering
    • /
    • v.16 no.3
    • /
    • pp.32-38
    • /
    • 2002
  • The synthesis of $CF_3$I and $C_2F_5I from $CF_3Br$ was studied for the reuse of $CF_3Br$ which is abolished to save the ozone layer of the earth. Reaction experiments were carried out in experimental scale synthesis equipment with catalysts, such as CuI, Kl, $K_2$$CO_3$, KF metal salt/active carbon and alumina support at $400~600^{\circ}C$. Main products of reaction were $CF_3i$ and $C_2F_5I$ with small amounts of $C_2F_5I$, $CF_4$, $CF_2Br_2$ by-products. 7.5wt% KI and $K_2CO_3$over activated carbon catalysts show the highest yield of $CF_3$I and 7.5wt% CuI over alumina catalysts show the highest yield of $C_2F_5i$. And optimal reaction temperature was about $500^{\circ}C$.