• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1753-1755
• /
• 1999

$LaCoO_3$ thick-film sensors were fabricated on alumina substrate by screen printing method. The sensitivity for gases was investigated by varying the heat treatment temperature of the films. X-Ray Diffractions and SEM photographs were used to examine their structural properties. The sensitivity of $LaCoO_3$ thick-film for CO gas was much better than for $C_4H_{10}$, $NH_3$ and NO gases. The best condition of heat treatment was $800^{\circ}C$ and the optimal operating temperature of $LaCoO_3$ thick-film for the highest sensitivity was $150^{\circ}C$. Sensitivities of the $LaCoO_3$ thick-film at 500ppm and l000ppm for CO gas were 72% and 95%, respectively.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1322-1326
• /
• 1999

In2O3 thick film gas sensor for detecting NOx gas of high concentration was fabricated by a screen printing technique. This work focussed on investigation of the change of sensitivity to NOx gas with firing temperatures of sensing layer and on improvement of the sensitivity by adding catalysts such as Al,. Ru, and SnO2 The cross sensitivites of sensor to CO, H2, CH4 and i-C4H10 gases were also examined under NO2 gas concentration of 200ppm Pure In2O3 gas sensor prepared at a firing temperature of 50$0^{\circ}C$ showed a maximum sensitivity to NOx gas at the operating temperature of 40$0^{\circ}C$ Al(0.004 wt%)-In2O3 sensor largely improved the sensitivities to both NO2 and NO gas and showed a superior selectivity compared with other gas sensors.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.622-626
• /
• 2010

Cu doped $SnO_2$ thick films for gas sensors were fabricated by screen printing method on alumina substrates and annealed at $500^{\circ}C$ in air, respectively. Structural properties of $SnO_2$ by X-ray diffraction showed (110), (101) and (211) dominant tetragonal phase. The effects of catalyst Cu in $SnO_2$-based gas sensors were investigated. Sensitivity of $SnO_2$:Cu sensors to 2,000 ppm $CO_2$ gas and 50 ppm $H_2S$ gas was investigated for various Cu concentration. The highest sensitivity to $CO_2$ gas and $H_2S$ gas of Cu doped $SnO_2$ gas sensors was observed at the 8 wt% and 12 wt% Cu concentration, respectively. The improved sensitivity in the Cu doped $SnO_2$ gas sensors was explained by decrease of electron depletion region in Cu and $SnO_2$ junction, and increase of reactive oxygen and surface area in the $SnO_2$.

• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.766-772
• /
• 1986

SnO2/Pt CO gas sensors operating at relatively low temperature were fabricated, and their performance characteristics were measured. When the mixing weight ratio of SnO2/Pt was 99.5/0.5, a good sensitivity to CO gas was obtained. And the experimental results were in consistent with the gas sensing model. The optimum operating, temperature range of the fabricated devices was 50-80\ulcorner and the response time was 15 sec. at 80\ulcorner in 1000 ppm CO ambient. The humidity dependence of sensitibity to CO gas could be reduced by adding hydrophokbic silica to the mixture of SnO2 and Pt. For the practical application of the fabricated devices, a CO gas alarming system has been developed.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1691-1698
• /
• 1989

Gas sensing effects produced by adsorptive reaction between specimen surface and gases are expected to be influenced greatly by the state of the speimen surface. In this study, Co1-xMgxO ceramics oxygen sensors were prepared by pressing at 0.3-1.5ton/cm\ulcornerwith or without binder, intending to change porosity and average grain size on the surface purposely. The composition ratio of CoO to MgO was fixed at 1:1(mol.%). Microstructure of prepared Co0.5Mg0.5O ceramics were observed, the electrical properties and the sensitivity characteristics for oxygen gas were investigated in the device temperature range of 700-1000\ulcorner and for oxygen partical pressure range of 1-10**-4 atm. Temperature dependence of the resistivity of the specimen showed NTC behavior, average grain size increased and porosity decreased with increasing compaction pressure. The slope of the resistivity of the specimen on the oxygen partial pressure decreased with increasing average grain size and with decreasing porosity. Particularly, specimen pressed by 0.3 and 0.5 ton/cm\ulcornershowed the highest sensitivity to oxygen gas.

• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.110-114
• /
• 1999

NOx sensing properties of $Ba_2WO_5$ were investigated by varying the sintering temperature in an effort to study the effects of the neck-width on gas sensitivity. $Ba_2WO_5$ sintered at $800^{\circ}C$, which exhibits neck-controlled conduction provides highest sensitivity of 47 and 29 at $500^{\circ}C$ to NO and $NO_2$, respectively. The samples sintered beyond $800^{\circ}C$ show sintering temperature-independent gas sensitivity. This may be because the grain boundary control is dominant at lower sintering temperatures and open neck control is dominant at higher sintering temperatures than $800{\circ}C$. The NOx sensing mechanism of $Ba_2WO_5$ was briefly discussed.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.16.1-16.1
• /
• 2011

Gas sensor properties of $WO_3$ nanowire structures have been studied. The sensing layer was prepared by deposition of tungsten metal on porous single wall carbon nanotubes followed by thermal oxidation. The morphology and crystalline quality of $WO_3$ material was investigated by SEM, TEM, XRD and Raman analysis. A highly porous $WO_3$ nanowire structure with a mean diameter of 82 nm was obtained. Response to CO, $NH_3$ and $H_2$ gases diluted in air were investigated in the temperature range of $100{\sim}340^{\circ}C$ The sensor exhibited low response to CO gas and quite high response to $NH_3$ and $H_2$ gases. The highest sensitivity was observed at $250^{\circ}C$ for $NH_3$ and $300^{\circ}C$ for $H_2$. The effect of the diameters of $WO_3$ nanowires on the sensor performance was also studied. The $WO_3$ nanowires sensor with diameter of 40 nm showed quite high sensitivity, fast response and recovery times to $H_2$ diluted in dry air. The sensitivity as a function of detecting gas concentrations and gas sensing mechanism was discussed. The effect of dilution carrier gases, dry air and nitrogen, was examined.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.821-825
• /
• 2002

ZnO thick films by Sol-Gel processing were investigated electrics, optics and the sensing characteristics of CO gas. Using the znic acetate dihydrate and acetylaceton (AcAc) as a chelating agent, stable ZnO sol was synthesized. ZnO phase was crystallized through the heat-treatment at $70^{\circ}C$ for 4hrs and influenced the sensing characteristics of the electrics and CO gas by uniform particle distributions not related particle size. The samples on the alumina substrate by thick films were investigated the properties of electrics and the effect of sensing. The sensitivity was so excellent in the sample of the heat-treatment at $600^{\circ}C$ for 12hrs and good in the heat-treatment for 1hrs generally. Crystallization and volatilization of organic materials according to the change of heating treatment temperature of thick films were analyzed by TG-DTA, XRD and mirostructure of thick films were observed by SEM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1470-1471
• /
• 2008

We present a front-side micromachined thermopile with high sensitivity in the 3-5${\mu}m$ window, and discuss its application to a novel non-dispersive infrared (NDIR) $CO_2$ gas sensor with a light source emitting collimated light. The micromachined thermopile shows a measured sensitivity of 30 mV/W and a $D^*$ of $0.3{\times}10^8cm^{\surd}Hz/W$. Using this newly fabricated thermopile, we also have successfully developed a small, sensitive NDIR $CO_2$ detector module for accurate air quality monitoring systems in energy-saving building and automotive applications. The novel sample cavity comprising specular reflectors around the light bulb is configured to uniformly emit collimated light into the entrance aperture of the cavity in order to enhance the sensitivity of NDIR $CO_2$ detector.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.139-142
• /
• 1990

A gas sensor, comprised of both ZnO and $PdCl_2$ powders, has been developed to sense the CO gas of low concentration (100 ppm). When the weight ratio of ZnO/$PdCl_2$ element sintered at $600^{\circ}C$ was 99.5/0.5, the maximum sensitivity to CO gas was obtained at the operating temperature of $200^{\circ}C$. Also, the response characteristics of this element were examined, and then the response time was decreased from 90 to 45 sees, with operating temperature increase in the range of $100-400^{\circ}C$.