• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.676-685
• /
• 2016

본 연구는 폴리스타렌(PS) 수지의 유화공정 효율성 향상을 위해 저온열분해 회분식 반응기를 이용하여, 단일 PS 수지와 Co 및 Mo 촉매를 각각 첨가한 PS 수지를 반응온도(425, 450, $475^{\circ}C$), 반응시간(20~80분, 15분 간격), 촉매 농도변화에 따른 PS수지의 액화생성물 전환율을 측정하였다. 최적의 열분해 조건은 반응온도 $450^{\circ}C$, 반응시간 35분으로 판단되며, 전환된 액화생성물의 주요 성분은 GC/MS 분석결과 스타이렌 및 벤젠유도체가 대부분으로 나타났다. 생성물은 산업통상자원부에서 고시한 증류성상 온도에 따라 가스, 가솔린, 등유, 경유, 중유로 분류하여 그 수율을 측정하였다. 그리고 $450^{\circ}C$ 반응온도에서 촉매 사용에 따른 전환율은 Co 촉매 > Mo 촉매 > 무촉매 순이었으며, 생성물 중 가스, 등유, 경유수율은 Mo 촉매, 가솔린은 무촉매, 중유는 Co 촉매에서 우수한 것으로 나타났다. Co 및 Mo 촉매 혼합 농도별 전환율 및 열분해 생성물 수율은 Co 촉매 100% 사용 시 가장 우수한 것으로 판단된다.

• 한국연소학회지
• /
• 제13권4호
• /
• pp.47-53
• /
• 2008

The reaction mechanism of methane dry reforming has been investigated using an arc-jet reactor. The effects of input power, $CO_2/CH_4$ and added $O_2$ were investigated by product analysis, including CO, $H_2$, $C_{2}H_{Y}$ and $C_{3}H_{Y}$ as well as $CH_4$ and $CO_2$. In the process, input electrical power activated the reactions between $CH_4$ and $CO_2$ significantly. The increased feed ratio of the $CO_2$ to $CH_4$ in the dry reforming does not affect to the $CH_4$ conversion. but we could observe increase in CO selectivity together with decreasing $H_2$ generation. Added oxygen can also increase not only CO selectivity but also $CH_4$ conversion. However, hydrogen selectivity was decreased significantly due to a increased $H_{2}O$ formation.

• 한국세라믹학회지
• /
• 제53권2호
• /
• pp.258-262
• /
• 2016

The effect of zirconium dioxide ($ZrO_2$) on the properties of color conversion glasses was examined in the $BaO-ZnO-B_2O_3-SiO_2$ system. The difference in refractive index between glass and phosphor affect the optical properties of the color conversion glass because of light scattering. Reducing the difference in refractive index is a method to improve the luminous efficacy of color conversion glasses. As a reference, a type of glass that contains 25 mol% of each component was used. To increase the refractive index of the glass samples, the BaO content was increased from 25 to 40 mol%, and $ZrO_2$ was added at levels of 1, 3, and 5 mol%. Color conversion glasses were prepared by sintering a mixture of glass and 5 wt% $YAG:Ce^{3+}$ phosphor. As a result, the refractive index of the glass was found to be dependent on the BaO and $ZrO_2$ contents in the BaO-ZnO-$B_2O_3-SiO_2$ system. As the BaO and $ZrO_2$ contents were increased, the luminous efficacy of the color conversion glass was improved because the refractive index difference between the glass and the $YAG:Ce^{3+}$ phosphor decreased.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.700-704
• /
• 2009

GTL(gas-to-liquid) 합성유 제조용 SCR(steam carbon dioxide reforming) 공정의 시뮬레이션 연구를 수행하였다. 온도 및 $CH_4/steam/CO_2$ 반응물 비와 같은 변수를 바꾸어 가면서 SCR 공정을 위한 최적 운전조건을 살펴보았다. 공정 시뮬레이션을 위해 Aspen Plus를 사용하였다. 또한 정상상태 가정하의 열역학적 물성치 계산을 위해 Aspen Plus의 RSK (Redlich-Kwong-Soave) 상태방정식을 사용하였다. FT 공정을 위한$H_2/CO$ 비, $CH_4$ 전환율, $CO_2$ 전환율을 살펴봄으로써 최적의 온도와 최적의 반응물 비를 결정하였다. 시뮬레이션 결과, SCR reformer 촉매층 출구 최적온도는 상압에서 $850^{\circ}C$ 였으며, 이 온도에서 $CH_4$ 전환율은 99%, $CO_2$ 전환율은 49%로 계산되었고, $CH_4/steam/CO_2$ 최적 반응물 비율은 1.0/1.6/0.7로 나타났다.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.116-120
• /
• 2013

관상의 광촉매 반응기에서 Pt가 담지된 $TiO_2$ 광촉매를 사용한 CO 전환 반응에 의해 CO를 제거하는 광촉매 공정에 대해 고찰하였다. $TiO_2$ 촉매에 Pt를 담지하는 방법, CO를 포함한 기체흐름속도, 기체흐름에 포함된 CO의 농도 그리고 기체의 수분함량이 CO를 $CO_2$로 전환하는 반응의 전환율에 미치는 영향을 검토하였다. Pt/$TiO_2$ 광촉매가 관의 내부에 코팅된 관상광촉매 반응기에서 진행된 실험결과 기체의 흐름속도 범위가 0.01~0.25 m/s, CO의 농도가 20~100 ppm 그리고 기체의 상대습도가 20~40%의 범위에서 CO는 UV의 조사 조건에서 거의 100% 정도 제거될 수 있었다. 기체흐름에 포함된 CO의 전환율은 기체의 흐름속도가 증가할수록 그리고 포함된 CO의 농도가 증가할수록 점점 감소하였다. 기체 흐름에 포함된 수분은 OH 라디칼을 형성함으로써 CO의 제거를 촉진할 수 있었다.

• 대한기계학회논문집B
• /
• 제41권11호
• /
• pp.727-734
• /
• 2017

이산화탄소의 농도를 줄이는 방법 중 하나로 전기화학을 이용하여 이산화탄소를 고부가 가치인 탄소로 전환하는 연구가 진행 중이다. 본 연구에서는 4.0 V, $600^{\circ}C$의 실험 조건에서 은, 니켈, 백금, 이리듐 전극을 사용하였다. 720분 동안 이산화탄소의 전환을 수행하였으며, 각 전극에서 생성된 탄소는 열중량 분석 및 XRD 분석을 수행하였다. 이산화탄소의 전환 및 생성 탄소의 양은 은, 백금, 니켈, 이리듐으로 나타났다. 열중량 분석을 통해 각 전극에서 생성된 탄소는 유사한 열 반응성을 가지며, XRD 분석을 통해 전극의 반응성에 따라 탄소의 결정성이 달라짐을 확인할 수 있었다. 은 전극은 전기화학적 전환 성능은 가장 높지만 약한 내구성을 보이며, 전극의 반응성 및 내구성을 고려하였을 때 백금이 4개의 재질 중에서 가장 적합함을 확인하였다.

• Journal of Power Electronics
• /
• 제5권3호
• /
• pp.233-239
• /
• 2005

In this paper, a new conceptual circuit configuration of a 3-phase voltage source, soft switching AC-DC-AC converter using an IGBT module, which has one ARCPL circuit and one ARDCL circuit, is presented. In actuality, the ARCPL circuit is applied in the 3-phase voltage source rectifier side, and the ARDCL circuit is in the inverter side. And more, each power semiconductor device has a novel clamp snubber circuit, which can save the power semiconductor device from voltage and current across each power device. The proposed soft switching circuits have only two active power semiconductor devices. These ARCPL and ARDCL circuits consist of fewer parts than the conventional soft switching circuit. Furthermore, the proposed 3-phase voltage source soft switching AC-DC-AC power conversion system needs no additional sensor for complete soft switching as compared with the conventional 3-phase voltage source AC-DC-AC power conversion system. In addition to this, these soft switching circuits operate only once in one sampling term. Therefore, the power conversion efficiency of the proposed AC-DC-AC converter system will get higher than a conventional soft switching converter system because of the reduced ARCPL and ARDCL circuit losses. The operation timing and terms for ARDCL and ARCPL circuits are calculated and controlled by the smoothing DC capacitor voltage and the output AC current. Using this control, the loss of the soft switching circuits are reduced owing to reduced resonant inductor current in ARCPL and ARDCL circuits as compared with the conventional controlled soft switching power conversion system. The operating performances of proposed soft switching AC-DC-AC converter treated here are evaluated on the basis of experimental results in a 50kVA setup in this paper. As a result of experiment on the 50kVA system, it was confirmed that the proposed circuit could reduce conduction noise below 10 MHz and improve the conversion efficiency from 88. 5% to 90.5%, when compared with the hard switching circuit.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.116-116
• /
• 2009

$TiO_2$ pastes was synthesized to obtained of high efficiency dye-sensitized solar cells using size dependent co-polymer. SBM co-polymer binder is consist of styrene, n-butyl acrylate, and methacrylic acid (SBM) monodisperse co-polymer binder materials and this $TiO_2$ pastes were applied of dye-sensitized solar cells (DSSCs). The photoanodes were characterized by ATR-Fourier Transform spectrometer, X-ray diffraction (XRD) and morphology was investigated by field emission scanning electron microscopy (FE-SEM). The photoelectrochemical properties of the thin films and the performance of DSSCs were measured by photovoltaic-current density, AC impedance and monochromatic incident photon-to-current conversion efficiency (IPCE). DSSC based on the 100nm size co-polymer binder was obtained conversion efficiency of 8.1% under irradiation of AM 1.5(100 $mWcm^2$).

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2065-2069
• /
• 2014

The DAC-7512E is a 12-bit digital to analog converter that is low power and a single package with internal buffers. The DAC-7512E takes up minimal PCB area for applications of space power electronics design. The spacecraft mass is a crucial point considering spacecraft launch into space. Therefore, we have performed a TID test for the DAC-7512E 12-bit serial input digital to analog converter to reduce the spacecraft mass by using a low-level Gamma-ray irradiator with $Co^{60}$ gamma-ray sources. The irradiation with $Co^{60}$ gamma-rays was carried out at doses from 0 krad to 100 krad to check the error status of the device in terms of current, voltage and bit error status during conversion. The DAC-7512E 12-bit serial digital to analog converter should work properly from 0 krad to 30 krad without any error.

• 한국분말재료학회지
• /
• 제5권4호
• /
• pp.273-278
• /
• 1998

$De-NO_x$ transition metals(Cu, Co)/ZSM-5 catalyst was made by mechanical alloying method, and their microstructures and repeated usage-properties were investigated by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The conversions ability of NO in the catalyst was measured. A part of ZSM-5 in CO/ZSM-5 composite powders was amorphous and the amorphous phase became less stable with increasing Co content. Conversion ability of NO in 10Cu/ZSM-5 powders decreased from 89% to 12% and that in 10Co/ZSM-5 decreased from 22% to 17% by 7 times conversion tests.