• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.11-20
• /
• 2014

For Web-based applications in IoT environment, IETF CoRE WG has standardizing the CoAP. One of limitations of CoAP is that CoAP standard does not consider the mobility management of the CoAP sensor node. In this paper, we propose the mobility management protocol of CoAP sensor node by considering the characteristics of the constrained network. The proposed mobility management protocol supports for Web client to be transmitted the sensing data from CoAP node reliably while the CoAP sensor moves into different wireless networks. To do this, we designed the architecture with the separate IP address management of CoAP sensor node and presented the mobility management protocol, which includes the holding and binding mode, in order to provide the reliable transmission. Finally, the numerical analysis and simulation with NS2 tool have been done for the performance evaluation in terms of the handover latency and packet loss with comparing the proposed mobility management protocol with other the existing mobility management protocols. The performance result shows that the proposed mobility management can provide the transmission of sensing data without the packet loss comparing with the existing mobility management protocol reliably.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.430-439
• /
• 2000

$In_2O_3$-based thin film sensor with 500-600 nm thick was fabricated for the detection of CO gas by rf magnetron sputtering. In order to improve both sensitivity to CO gas and selectivity to hydrogen gas containing -CH, ultra-thin transition metal Co catalyst was sputtered over $In_2O_3$ thin film and annealed at $500^{\circ}C$. Sensitivity to CO was maximum at the thickness of Co 2.1 nm and $300^{\circ}C$, and that to $C_3H_8$ was at the thickness of Co 1.4 nm and $350-400^{\circ}C$. From the x-ray photoelectron spectroscopy (XPS) result, ultra-thin Co was existed into CoO covered with $Co_2O_3$ on $In_2O_3$ particles, and thus p-n junction of $In_2O_3(n-type)$-CoO(p-type) was thought to be formed. In this p-n junction type sensors, sensing mechanism with reducing gases can be explained by the variation of depletion layer thickness formed in the interface.

• Journal of Sensor Science and Technology
• /
• v.6 no.3
• /
• pp.207-213
• /
• 1997

A field effect transistor(FET) type dissolved carbon dioxide($pCO_{2}$) sensor with a double layer structure of hydrogel membrane and $CO_{2}$ gas permeable membrane was fabricated by utilizing a $H^{+}$ ion selective field effect transistor(pH-ISFET) with Ag/AgCl reference electrode as a base chip. Formation of hydrogel membrane with photo-crosslinkable PVA-SbQ or PVP-PVAc/photosensitizer system was not suitable with the photolithographic process. Furthermore, hydrogel membrane on pH-ISFET base chip could be fabricated by photolithographic method with the aid of N,N,N',N'-tetramethyl othylenediarnine(TED) as $O_{2}$ quencher without using polyester film as a $O_{2}$ blanket during UV irradiation process. Photosensitive urethane acrylate type oligomer was used as gas permeable membrane on top of hydrogel layer. The FET type $pCO_{2}$ sensor fabricated by photolithographic method showed good linearity (linear calibration curve) in the range of $10^{-3}{\sim}10^{0}\;mol/{\ell}$ of dissolved $CO_{2}$ in aqueous solution with high sensitivity.

• The Magazine of the IEIE
• /
• v.36 no.12
• /
• pp.24-30
• /
• 2009

본 논문은 2.4GHz기반의 RF트랜시버를 이용하여, 대기질 센서로부터 획득한 정보를 전송하기 위한 하드웨어 및 펌웨어의 설계에 대해 제안한다. 하드웨어를 구성하는 대기질 센서는 CO2, Dust, CO, NO2, VCO등의 환경 센서와 온/습도를 센싱할 수 있는 센서로 구성이 된다. 각각의 센서는 하나의 보드에 탑재되며, 무선 플랫폼과 어댑터로부터 필요한 전원을 공급받게 된다. 펌웨어는 응용 및 확장이 용이한 TinyOS를 사용한다. 펌웨어의 기능은 타이머, 센싱, RF전송 등이며, 타이머 분할 및 완료 함수 등을 이용한 각각의 센서 데이터 수집이 가능하도록 설계해야한다. 또한 RF 전송은 멀티 홉(Multi-Hop)이 지원되도록 설계하여, 수신부까지의 거리가 미치지 못하는 노드의 데이터를 받을 수 있도록 함으로서, 지능형 네트워크의 개념을 부가한다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1177-1182
• /
• 2003

The porous sensing materials for BaTiO$_3$ gas sensors were fabricated by adding the graphite powders. The crystalline structure and microstructure of the porous BaTiO$_3$-based ceramics were studied. All the sintered bodies showed a tetragonal perovskite structure. The porosity increased with increasing graphite contents. This is mainly due to an enhanced evolution of CO and $CO_2$ gases resulting from the exothermic reactions of graphite and oxygen during the sintering. It was found that the discrepancy in the resistivities measured in air and CO atmospheres at high temperatures (>∼20$0^{\circ}C$) became remarkable with increasing temperature. The sensitivity of CO gas increased with porosity, since the reactions between CO gas and $O_2$$^{[-10]}$ and between CO gas and $O^{[-10]}$ are active due to the formation of many reaction sites. The porous BaTiO$_3$-based ceramics could be promising as a sensing material for CO gas sensors.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.4
• /
• pp.28-38
• /
• 2009

In this study, a remote air quality monitoring system for underground spaces was developed by using NDIR-based CO$_2$ sensor. And the remote monitoring system based on wireless sensor networks was installed practically on the subway station platform. More than 6.5 million citizens commutate everyday by the Seoul subway transportation that is the most typical public transportation. They concern about air quality with increasing interest on public health or many workers in subway stations or underground shopping centers. Recently, the Korean Ministry of Environment has operated the air quality monitoring system in some subway stations for testing phase. However, it showed many defects which are large-scale, high-cost and maintenance of precision sensors imported from abroad. Therefore this research includes the reliability test and a theoretical study about the inexpensive commercialized CO$_2$ sensor for reliable measurement of air quality which changes rapidly by the surrounding environments. And then we develop the wireless sensor nodes and the gateway applied for remote air quality monitoring. In addition, web server program was realized to manage air quality in the subway platform. This result will be valuable for a basic research for air quality management in underground spaces for future study.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.37-42
• /
• 2009

In this study, nanopower ZnO and $SnO_2$ as sensing materials were prepared by hydrazine and hydrothermal routes, respectively, and were doped with Pd, Ru catalyst. The CO and $NO_2$ sensors were fabricated by coating of sensing materials on the MEMS-based structure with electrodes and heaters. The 0.1 wt% Pd doped $SnO_2$ sensor and Ru doped ZnO sensor showed the high sensor response to CO 30 ppm and $NO_2$ 1 ppm, respectively. The sensor signal was stable. This can be used for the detection of pollutant gases emitted from gasoline engine.

• Journal of Sensor Science and Technology
• /
• v.6 no.6
• /
• pp.476-482
• /
• 1997

A portable electronic nose system has been fabricated and characterized using an oxide semiconductor gas sensor array and pattern recognition techniques such as principal component analysis and back-propagation artificial neural network. The sensor array consists of six thick-film gas sensors whose sensing layers are Pd-doped $WO_{3}$, Pt-doped $SnO_{2}$, $TiO_{2}-Sb_{2}O_{5}-Pd$-doped $SnO_{2}$, $TiO_{2}-Sb_{2}O_{5}-Pd$-doped $SnO_{2}$ + Pd coated layer, $Al_{2}O_{3}$-doped ZnO and $PdCl_{2}$-doped $SnO_{2}$. The portable electronic nose system consists of an 16bit Intel 80c196kc as CPU, an EPROM for storing system main program, an EEPROM for containing optimized connection weights of artificial neural network, an LCD for displaying gas concentrations. As an application the system has been used to identify 26 carbon monoxide/hydrocarbon (CO/HC) car exhausting gases in the concentration range of CO 0%/HC 0 ppm to CO 7.6%/HC 400 ppm and the identification has been successfully demonstrated.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.7-12
• /
• 2014

IETF (Internet Engineering Task Force) CoAP (Constrained Application Protocol) protocol is supported communication between sensor or actuator nodes by in a constrained environment, such as small amount of memory, and low power. CoAP and HTTP protocol can convert easily, and can use to monitor or controll the infrastructure utility through low-power sensor and actuator networks in IoT (Internet of Thing) and M2M (Machine-to-Machine) environment. IETF CoRE(Constrained RESTful environments) Working Group proposed CoAP protocol in 2010, and began to standardize it. Recently, CoAP protocol is published RFC (Request for Comments) 7252. In this paper, we design and implement of CoAP protocol for testing the interoperability in heterogeneous operating environments. For this experiment, we developed the CoAP client program based on Windows environment and CoAP server program in Linux environment to test the interoperability.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.1
• /
• pp.22-31
• /
• 2002

A Safety Monitoring System using a laser and 2-D arrayed photo sensors is developed. To monitor of the deformation and small rotation of structure the developed optical system using 2-D photo sensor array was used to detect the variation of optical orbit of laser which was induced by deformation of the structure. Also, an operating program to manage the system and an algorithm for the data acquisition and the database are introduced. In this study, we demonstrated the capabilities of this system by laboratory experiments before applying the system to the field.