• 한국표면공학회지
• /
• 제49권3호
• /
• pp.301-306
• /
• 2016

The effects of nanotexturing and post-etching on the reflection and quantum efficiency properties of diamond wire sawn (DWS) multicrystalline silicon (mc-Si) solar cell have been investigated. The chemical solutions, which are acidic etching solution (HF-$HNO_3$), metal assisted chemical etching (MAC etch) solutions ($AgNO_3$-HF-DI, HF-$H_2O_2$-DI) and post-etching solution (diluted KOH at $80^{\circ}C$), were used for micro- and nano-texturing at the surface of diamond wire sawn (DWS) mc-Si wafer. Experiments were performed with various post-etching time conditions in order to determine the optimized etching condition for solar cell. The reflectance of mc-Si wafer texturing with acidic etching solution showed a very high reflectance value of about 30% (w/o anti-reflection coating), which indicates the insufficient light absorption for solar cell. The formation of nano-texture on the surface of mc-Si contributed to the enhancement of light absorption. Also, post-etching time condition of 240 s was found adequate to the nano-texturing of mc-Si due to its high external quantum efficiency of about 30% at short wavelengths and high short circuit current density ($J_{sc}$) of $35.4mA/cm^2$.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.56-60
• /
• 2005

We studied fire properties of MOF(Metering Out Fit) insulation cover and field condition of 22.9kV power receiving system. $49.5\%$ of formal equipments were installed indoors, whereas $40.8\%$ of informal equipments were installed as H-type. Insulation treatment was not done at a $22.4\%$ ratio of main line($27.7\%$ of transformer, $70.2\%$ of COS, $10.4\%$ of MOF). Fire pattern analysis showed that the fire started at the secondary part of OC wire. In the result of DTA(Differential Thermal Analysis), normal cover showed exothermic reactions at $310^{\circ}C,\;399^{\circ}C\;and\;510^{\circ}C$ (endothermic reactions at $382^{\circ}C$). Whereas damaged cover showed exothermic reactions at $412^{\circ}C$(endothermic reactions at $389^{\circ}C$). In the result of TGA(Thermo Gravimetric Analysis), the thermal weight change of normal cover was similar compared to damaged cover. In the result of FT-IR analysis, normal cover showed absorption peaks at $3,024cm^{-l},\;2,921cm^{-l},\;1,600cm^{-1},\;1,492cm^{-1},\;1,451cm^{-1},\;1,154cm^{-l},\;1,027cm^{-1},\;906cm^{-1}$. Whereas, in case of tracked cover, the absorption peaks that were shown in normal cover disappeared and different absorption peak was shown at $966cm^{-1}$.

• 한국건축시공학회지
• /
• 제4권1호
• /
• pp.89-96
• /
• 2004

Porous concrete is used of various parts by advantage of porous. Example of growing of plant is possible, and dwelling of creature, and filter functions of various contaminant, and decrease of noise, and so on. This research is for porous concretes that were used by four aggregate rubble, refreshing aggregate, expanded clay, orchid stone. This research estimate that physical and mechanical characteristics of fresh concrete and hardened concrete. The purpose of this research is to make environment-friendly porous concrete. This research's conclusion is as following : 1. Porous Concrete's slump was measured 12~14cm with rubble, 12~16cm with refreshing aggregate, 11~13cm with expanded clay, 11~13cm with orchid stone. Weight of aggregate was bigger, slump price appeared by bigger thing. Because placed Porous Concrete is low viscosity and small resistance between aggregate, it estimated that have high workability. 2. Porous Concrete's unit weight was measured 1.71~1.75t/$\textrm{m}^3$ with rubble, 1.58~1.62t/$\textrm{m}^3$ with refreshing aggregate, 1.19~1.20t/$\textrm{m}^3$ with expanded clay, 0.98~1.06t/$\textrm{m}^3$ with orchid stone. Showed aspect such as weight of aggregate. 3. Porous Concrete's compressive strength was measured 76~102kgf/$\textrm{cm}^2$ with rubble, 51~60kgf/$\textrm{cm}^2$ with refreshing aggregate, 30~40kgf/$\textrm{cm}^2$ with expanded clay, 13~16kgf/$\textrm{cm}^2$ with orchid stone. 4. Tendency of tensile strength and bending strength showed generally similarly with compressive strength, but showed low value fewer than 15kgf/$\textrm{cm}^2$ Therefore, wire mesh, reinforcing rod, such as establishment of frame is considered to need in reinforcement about tensility or flexures in case receive tensility or produce product of thin absence form. It concludes by speculating on the consequences of extrapolating the results of study to remodelling the office building being already existence.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.254.2-254.2
• /
• 2013

Cu wire 발열패드는 대중화된 히터로 많이 이용되지만 높은 소비전력(70 w이상)으로 에너지 효율을 중요시 하는 미래 소재로는 적합하지 않아 효율이 높은 발열 소재의 연구가 이루어지고 있다. 이에 본 실험에서 Graphite표면에 Amide 기능화를 유도된 Carbon nanotube (Electrical Conductivity $10^5$ s/cm, Thermal Conductivity >3,000 w/mk)를 분산 시켜, Graphite의 우수한 전기 전도도의 특성을 이용할 뿐만 아니라 Carbon nanotube의 접착 특성을 통해 물리적 특성을 향상시켜 면상발열체의 도막 특성 향상뿐만 아니라 효율적 발열을 유도 하고자 한다.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.32-43
• /
• 2014

This paper presents the intra capacitance modeling according to the winding method, section bobbin and coil structure for hybrid choke coil capable of the EMI attenuation of broad bands from lower frequency bands to higher frequency bands and high frequency type common-mode choke coil capable of the EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. In case of high frequency type CM choke coil, it can be explained the parasitic capacitance of A type and section bobbin type winding methods among them is much smaller than the other. The first resonant frequency of the proposed CM choke coil tends to increase as the parasitic capacitance becomes small and its impedance characteristics also show improved performance as the first resonant frequency increases. In case of hybrid choke coil using rectangular copper wire, it has investigated its parasitic capacitance compared to CM choke coil of conventional toroidal type becomes small. Also it has confirmed through the experiment results that CE margin and RE margin in frequency bands 0.5MHz to 5MHz and 30MHz to 200MHz are respectively 10dB and 15dB greater than that of conventional type in case of one stage EMI filter structure adopting hybrid choke coil compared to two stage EMI Filter structure using two of each CM choke coil used in the lower and higher frequency bands or two of CM choke coil used in only the lower frequency bands. In the future, the hybrid choke coil and CM choke coil of high frequency type show it can be practically used in not only LED/LCD-TV SMPS but also several applications such as LED Lighting, Laptop Adapter, Server Power Supply and so on.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.844-847
• /
• 2002

This paper is to investigate the wear behavior of submerged-arc clad materials by the wear test with a ball-on-disk type wear testing machine in air. The specimens were clad with Stoody105 alloy wire on a carbon steel (SM45C) substrate by submerged-arc cladding process under different welding parameters. The wear behavior of the cladding through ball-en-disk test has been studied under the wear load from 5N to 16N and sliding speed from 8cm/s to 35cm/s. The weight of the specimen loss was measured. Scanning electron micrographs of the worn surface show a layer of oxide film formed on the worn surface. Oxidation wear mechanism controls the wear process. The spalling of the oxide is caused by the repeated rubbing fatigue mechanism.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.958-964
• /
• 1994

To study on the superconducting properties with cooling conditions, silver-sheathed Bi-Pb-Sr-Ca-Cu-O wires fabricated by the powder-in-tube method. The wires cooled down in the furnace, air and liquid NS12T after sintering at 840$^{\circ}C$ Critical current density of sample cooled in the furnace is 5.1${\times}$10S03TA/cmS02T and sample cooled in the air is 40A/cmS02T at 77K, zero magnetic field. The latter is very low critical current density of Bi system. 2223 high-Tc superconducting phase of sample cooled in the air was distroyed. Properties of sample cooled down in the liquid nitrogen is the same as cooled in the furnace.

• E2M - 전기 전자와 첨단 소재
• /
• 제6권5호
• /
• pp.407-416
• /
• 1993

무산소동을 안정화 모재로한 Cu/Nb-Ti 빌렛트를 제작한 다음 간접 열간방식의 압출에 의해 얻어진 봉재를 인발한 후 신선과 열처리를 반복하여 단심 및 다심 Nb-Ti 초전도 선재를 제조하였다. 가공 조직을 조사한 결과, 단심 선재의 경우 Nb-Ti 심의 단면이 균일하게 가공된 것을 확인하였으며 다심선재의 경우는 신선가공에 의하여 다소 불균질한 필라멘트부분이 관찰되었다. 4.2K, 자장하에서 4단자법으로 직선형 단척시료의 임계전류를 측정하여 가공 열처리 조건에 따른 임계전류밀도의 자장특성을 조사하였는데 열처리시간을 길게하고 가공도를 높인 시료일수록 자장하의 임계전류밀도가 높게 나타나는 것을 확인하였다. 4.2K, 5T 자장하에서 각각 4 x $10^{5}$A/$cm^{2}$ 및 2 x $10^{5}$A/$cm^{2}$의 임계전류밀도를 나타내는 Nb-Ti 단심 및 다심 초전도선재를 제작 할 수 있었다.있었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.433-438
• /
• 1998

수소와 물 사이의 촉매교환공정은 중수 생산 및 삼중수소 분리를 위해 개발되어 왔다. 국산 소수성 촉매를 이용하여 새로운 튜브형 촉매탑을 고안하고, 수소와 물 사이의 수소 동위원소 분리를 실증하는 실험을 수행하였다. 국산 소수성 측매는 Styrene Divinyl Benzene Copolymer 담체에 백금을 담지한 촉매로써, 모양은 실린더형이며, 직경이 4mm이다. 촉매 작용을 하지 않는 충전물은 wire mesh ring(3mmx3mm)이고, 튜브는 PCI사 membrane(PVDF)이다. 촉매합의 직경은 2.5cm, 높이는 35cm였고, 온도는 333k, 압력은 0.1MPa였다. 기상 촉매반응만 시켰을 때 촉매탑이 정상상태에 도달되는데 약 3-5시간이 필요했으며, 액체 흐름이 있는 경우가 훨씬 짧았다. 촉매탑의 분리성능을 평가하기 위해 수소 동위원소 분리실험에서 얻은 기체 농도를 이용하여 물질전달계수(Kya)를 계산하였다. Kya는 0.2-0.5 sec$^{-1}$였으며, 액체와 기체 유속에 의해 크게 영향을 받았다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.341-346
• /
• 2000

This experimental study investigated the flow motion of the working fluid for various diameters of miniature thermosyphons and the performance characteristics for the various amount of the working fluid. The temperatures of condenser surface were measured and visual observations were conducted. The test results show that some fluid condensed in the tube diameters of 0.18cm and 0.22cm is not returned to the evaporator section due to capillary effect so that large temperature gradients are measured. To enhance returning the working fluid, one copper wire of 0.5mm diameter was inserted and the test results show good performance. When the liquid charge was less than 10% in volume dry-out was occurred fur the thermosyphons of the inner diameter of 1.8mm and 2.2mm.