• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.620-624
• /
• 2004

The Construction Industry become to large. So, construction management is needed. In Korea, an organic law about construction industry was made in 1996. And CM was introduced, too. But CM is not activated with institutional inertia. A reason Is a perpetual friction between CM and Gamri. And it is not thoroughgoing enough about supply of CM's effect with Chf Best Practice checklist and Key Performance Index. This study will develop the CM Best Practice checklist with CM's work and technique in project-dimensional. The CM Best Practice checklist will guide to have a good result.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.290-298
• /
• 2014

Purpose: To ascertain the increase of the farm income that predominantly relies on human resources by mechanizing Welsh onion harvesting, a tractor-mounted Welsh onion harvester was developed in this study. Method: An experiment for evaluating harvesting performance was performed for the developed Welsh onion harvester in an actual Welsh onion farm. The harvest performance was evaluated at the tractor running speeds of 5.0 cm/s, 11.4 cm/s and 15.8 cm/s, by comparing the operating efficiency, harvest rate, and damage rate of the Welsh onion harvester. Results: The performance of the harvester was rated as very good, with a 100% harvest rate, regardless of tractor running speed. Furthermore, it is shown that work efficiency of the harvester is expected to increase as the running speed increases. Nonetheless, the damage rate of the harvested Welsh onions at running speeds 5.0 cm/s, 11.4 cm/s, and 15.8 cm/s, increased correspondingly and proportionally to speeds from 4.55% to 6.53% and to 11.29%. The residual amount of soil on the harvested Welsh onions was about 0.24% of their weight showing excellent soil-removal performance of the harvester. Conclusion: The developed Welsh onion harvester is believed to improve the labor productivity and cultivation environment of Welsh onion farmhouses by the mechanization of the harvesting process that is currently associated with the largest amount of labor hours.

• Korean Management Science Review
• /
• v.18 no.1
• /
• pp.89-105
• /
• 2001

The performance of Cellular Manufacturing (CM) systems has been rigorously investigated during the last two decades, but the extent of empirical research on CM is limited. A major objective of this study is to examine the relationship between critical success factors, employees' implementation attitudes and performance of CM systems. Two hypothesis were formulated &d Tested: (1) The impact of critical success factors on performance and to what extent does certain critical success factors correlate with performance\ulcorner (2) How does the relationship between critical success factors and performance differ by employees' implementation attitudes\ulcorner Results from the study provide partial support for relationship between critical success factors (infrastructure, organizational immersion, autonomous management) and performance. The results also show that differences in performance of organizations grouped by degree of employees' attitudes could be found.

• Journal of Animal Science and Technology
• /
• v.59 no.7
• /
• pp.19.1-19.10
• /
• 2017

Background: To reduce use of main feed ingredient like corn, soy bean meal (SBM) and wheat, alternative ingredients has been studied like copra meal (CM). Production amount of CM which has been high makes CM to be an alternative feed stuff. However, low digestibility on AA and low energy content by high fiber content can be an obstacle for using CM. This experiment was conducted to evaluate the effects of CM supplementation with ${\beta}$-mannanase on growth performance, blood profile, nutrient digestibility, pork quality and economic analysis in growing-finishing pigs. Methods: A total of 100 growing pigs ([Yorkshire ${\times}$ Landrace] ${\times}$ Duroc) averaging $31.22{\pm}2.04kg$ body weight were allotted to 5 different treatments by weight and sex in a randomized complete block (RCB) design in 5 replicate with 4 pigs per pen. Treatments were 1) Control (corn-SBM based diet + 0.1% of ${\beta}$-mannanase (800 IU)), 2) CM10 (10% copra meal + 0.1% ${\beta}$-mannanase (800 IU)), 3) CM15 (15% copra meal + 0.1% ${\beta}$-mannanase (800 IU)), 4) CM20 (20% copra meal + 0.1% ${\beta}$-mannanase (800 IU)) and 5) CM25 (25% copra meal + 0.1% ${\beta}$-mannanase (800 IU)). Four phase feeding program was used: growing I (week 1-3), growing II (week 4-6), finishing I (week 7-9) and finishing II (week 10-12). Results: In growth performance, there was no significant difference among treatments during whole experimental period. In growingI phase, G:F ratio tended to increase when CM was increased (P = 0.05), but ADG and ADFI tended to decrease in finishingII phase (linear, P = 0.08). Also, increasing CM reduced ADG (linear, P = 0.02) and feed efficiency (linear, P = 0.08) during the whole finishing period. In blood profiles, BUN was linearly increased as CM increased (linear, P = 0.02) at growingII period. In digestibility trial, there was no significant difference in dry matter, crude fat, crude ash and nitrogen digestibility. However, crude protein digestibility was decreased linearly (linear, P = 0.02). In economic analysis, feed cost per weight gain and total feed cost per pig were reduced in overall period when CM was provided by 25% (linear, P = 0.02). Conclusion: CM with 0.1% of ${\beta}$-mannanase (800 IU) could be supplemented instead of corn and SBM up to 25% without detrimental effects on growth performance and pork quality of growing-finishing pigs.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.269-274
• /
• 1998

In this study, to increase fluidity and resistance of segregation of materials, the effect of each of the materials, which have effects on high performance concrete from investigating the properties of strength and drying shrinkage of high performance concrete made by the basic mix proportion used fly-ash and ground granulated blast-furnace slag after hardening, has been checked. According to the experimental results, fluidity on W/C = 34% was satisfied within slump-flow 65$\pm$ 5cm and U-type self-compactability difference 5cm. On the properties of strength, high performance concrete produced compressive strength over 400kg/$\textrm{cm}^2$ in 28days when powder was replaced by 40% of fly-ash and 60% of ground granulated blast-furnace slag. And compressive strength was taken over 600kg/$\textrm{cm}^2$ equal to non-replacement in 91days. Also, the length change of concrete with the addition of fly-ash was smaller than that without it. Therefore, it may be effective on the decrease of drying shrinkage volume.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.275-280
• /
• 1998

In this study, to increase fluidity and resistance of segregation of materials, the effect of each of the materials, which have effects on high performance concrete from investigating the properties of strength and drying shrinkage of high performance concrete made by the basic mix proportion used fly-ash and ground granulated blast-furnace slag after hardening, has been checked. By the results of this experiment, fluidity on W/C=34% was satisfied within slump-flow 65$\pm$5cm and U-type self-compacting difference 5cm. On the properties of strength, high performance concrete produced compressive strength over 400kg/$\textrm{cm}^2$ in 28days when powder was replaced by 40% of fly-ash and 60% of ground granulated blast-furnace slag. And compressive strength was taken over 600kg/$\textrm{cm}^2$ equal to non-replacement in 91days. Also, the length change of concrete with the addition of fly-ash was smaller than that without it. Therefore, it may be effective on the decrease of drying shrinkage volume.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.10
• /
• pp.1457-1463
• /
• 2005

In this research, the possibilities of using canola meal (CM) in place of soybean meal (SBM), and also the effects of multi-enzyme and phytase supplementation on the performance of quails were investigated. For this purpose, soybean meal (44% CP), canola meal (37% CP), phytase (produced from Peniophora luci) and multi-enzyme ($\beta$-glucanases, pectinases, cellulases and hemicellulases) were used. CM was used supplying 0, 25 and 50% of CP from SBM and each of the phytase and multi-enzyme blends were added to the each level. This study was conducted with 675 day old quails (Coturnix coturnix Japonica) in 9 groups with 3 replicates including 25 birds (mixed sex) per replicate. Nine isocalaric and isonitrogenous diets were prepared. The effects of enzymes and CM levels were studied with a 3${\times}$3${\times}$3 factorial arrangement for three CM levels (0, 25 and 50%), three treatments (without enzyme, phytase enzyme and multi-enzyme) and three replicates. While the 25% CM level did not affect the liveweight gain 50% CM level decreased the liveweight gain (p<0.05). Multi-enzyme addition to the 50% CM group increased the liveweight gain compared to the other groups (p<0.05). CM levels and enzyme supplementation had no effect on feed consumption, feed conversion ratio, dressing percentage, viability, tibia ash content, Ca and P contents of tibia ash, viscera weight, gizzard weight and length of growth period. While heart weight and liver weight were not affected by CM levels, but they were affected by enzyme supplementation. CM levels and enzyme supplementation did not affect final liveweight, feed consumption, feed conversion ratio, egg yield, egg weight, shell weight and shell index during laying period. The increase in the CM level lightened the colour of the yolk (p<0.05).

• Magazine of the Korea Concrete Institute
• /
• v.10 no.4
• /
• pp.93-100
• /
• 1998

This paper presents a study on the flexural stiffness, plastic hinge length and plastic hinge rotation capacity of reinforced high performance concrete beams. 15 beams with different strength of concrete, reinforcement ratio and the pattern of loadings were tested. From the test results of reinforced normal strength concrete beams and reinforced high performance concrete beams with the concrete which has cylinder compressive strength of 700kg/${cm}^2$, slump value of 20~25cm and slump-flow value of 60~70cm. It is found that an extreme fiber concrete compressive strain of ${\varepsilon}_{cu}=0.0047$ may be used in ultimate curvature computations of reinforced high performance concrete beams. An empirical equation is proposed to estimate the effective moment of inertia. length and rotation capacity of plastic hinge of simply supported reinforced high performance concrete beams. The estimated deflections using this equation agree well with the experimental values.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.10 no.2
• /
• pp.39-47
• /
• 2010

In this study, there should be a debation on the methods, such as considerations on the CM organization of skyscraper project for the client's side, process and impact factors need to be taken, and suggesting the evaluation and selection criteria, which may lead strategic decision-making by the client. Owner of the CM organizational decision to establish a variety of alternatives, the range of CM performance characteristics of the project, considering the weight and also by evaluating the effectiveness of appropriate alternative is selected. Domestic skyscraper project, decisions about the CM organization for 'S Tower' prior to the proposed decision and the criteria was applied. As a result, domestic CM/PM companies and overseas CM/PM companies were doing business as J/V, Supervision of the integration work order types showed the highest performance levels. when they ordered CM services. The project cost reduced and organizational improvements, the results of applying alternative way, improve on-site construction plans, sharing key technologies, process improvement plan could benefit from such expectations.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.53-61
• /
• 2012

This study was conducted to clarify reasonable root pruning and transplanting density for efficient production of seedlings of Quercus species, which is a representative planting species in Korea. Seedlings of Q. acutissima and Q. serrata, which were pruned roots by 5 cm, showed poorer above-ground and root growth compared to those pruned by 10 cm and 15 cm, and growth performance of seedlings pruned by 10 cm was shown similarly those pruned by 15 cm. The growth performance of seedlings transplanted in the density of below 64 seedlings per $m^2$ was greater than those transplanted in the density of over 81 seedlings per $m^2$. Therefore, one-year-old seedlings of Q. acutissima and Q. serrata should be transplanted in the density of 64 seedlings per $m^2$ after pruning their roots by 10 cm to obtain excellent growth performance and increase the efficiency of transplanting. The results of this study can be used as baseline for producing superior seedlings of Q. acutissima and Q. serrata at nursery and understanding early transplanting performance of the species.