• Title/Summary/Keyword: CM method

Search Result 6,970, Processing Time 0.036 seconds

Pyroelectric Properties of PZT(30/70) Thick film Prepared by Sol-Gel Method (Sol-Gel 법으로 제작된 PZT(30/70) 후막의 초전특성)

  • 송금석;장동훈;강성준;윤영섭
    • Proceedings of the IEEK Conference
    • /
    • 2003.07b
    • /
    • pp.1121-1124
    • /
    • 2003
  • PZT(30/70) thick film was fabricated by using 1,3 propanediol-based sol-gel method. Prepared film of pyroelectric property was investigated by Dynamic method of modulation frequency dependence. Pyroelectric coefficient was obtained about 5.0$\times$10$^{-8}$ C/$\textrm{cm}^2$.K. The figure of merits for voltage responsivity and specific detectivity were 3.4$\times$10$^{-11}$ C.cm/J and 5.9$\times$10$^{-9}$ C.cm/J, respectively, because of relative high-dielectric constant and high-pyroelectric coefficient. Voltage responsivity was increased at low modulation frequency and it was decreased at high modulation frequency. Voltage responsivity was maximum 1.84 V/W at 10 Hz. As Johnson noise is dominant, Noise voltage was increased nearly proportional to f$^{-1}$ 2/. Noise equivalent power and specific detectivity were 2.83$\times$10$^{-7}$ W/Hz$^{1}$2/ and 3.13$\times$10$^{5}$ cm.Hz$^{1}$2//W the same frequency at 80 Hz, respectively.

  • PDF

A Study on the Reproduction of Yoseon-Cheobli (腰線帖裵) of the Earlier Joseon Dynasty (조선초기(朝鮮初期) 요선첩리(腰線帖裏) 재현에 대한 연구)

  • Kim, Jin-Hong;Cho, Woo-Hyun
    • Journal of the Korean Society of Costume
    • /
    • v.61 no.2
    • /
    • pp.102-115
    • /
    • 2011
  • This study is about reproduction of Yoseon-Cheobli excavated from Byun-su tomb in earlier Joseon Dynasty. There are three Yoseon-Cheobli in Byun-su tomb. The producing process is made in concrete by suggesting the process of producing clothing. Based on the Annals of the Joseon Dynasty, the most frequently recorded one, was reproduced by dying fabric with safflower and indigo plants. Through the research about their specific size, sewing method and construction, it have been produced in the following. First, the revealing that collar to be half-square and to compose the line in the center of collar. The width of the collar is 11.6 12.1cm. Second, the 21~22 pairs of waist lines that are 13~14cm in width fixed at intervals of 0.3cm. The method of making waist lines is twisting either fabrics or silk threads. Third, fine gathering around the part of the waist of skirt, and the size of fold surface is 0.2cm. Sewing method needs running stitch and backstitch. As the result of producing the cloth, it became to possess more ornamental features after transformation suitable to the new environment while the same remained functional features for everyday life such as a dressing shape, length of the bodice and curvy completion line of a collar strip.

A Study on the Marking Efficiency of A-line Skirt (A-line Skirt의 Marking 효율에 관한 연구)

  • Uh Mi-Kyung
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.8 no.1
    • /
    • pp.69-79
    • /
    • 2006
  • The purpose of this study is to find the proper width of fabric which can bring high efficiency on productivity. We focus on the marking method by comparing and analyzing the marking efficiency of A-line skirt. This study employs 4 criteria to mark the A-line skirt, which are cutting method, angle, width, and direction, respectively. There can be 2 different cutting methods(fold pattern and add seam pattern at the front and back center line), and 2 different angles(warp angle and bias angle). Also, width of the fabric can be classified into 2 groups(110cm, 150cm), and marking direction can be grouped into 2(one direction marker and one direction per each size marker). These 4 criteria make 16($2^*2^*2^*2$) cases for this study. Main findings are follows. First, the skirt with folded at the center line had higher efficiency rate than the skirt with add seam at the center line. Second, the skirt with the 150cm width has higher efficiency rate than that of 110cm. Third, fixing the warp angle has higher efficiency rate than that of fixing the bias angle at the front and back center line. Finally, one direction per each size marker has much higher efficiency than the one direction marker.

  • PDF

A quantitative determination of surfactant mixtures by FT-IR (FT-IR을 이용한 계면활성제 혼합물의 정량)

  • 최종근;노경원
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.21 no.2
    • /
    • pp.129-139
    • /
    • 1995
  • To confirm the usefulness of partial least-squares(PLS) and multiple scattering correction(MSC) method for quantitation of surfactants in [quantitative methods using FT-lR, reconsitituted mixtures of LAS, MES and ELA-9 were tested. Each mixture was dissolved in 50% EtOH, dried, and applied to the KBr cell. From the IR spectra of these mixture, the variance spectrum was obtained. After repeated calibrations for the various regios of this spectrum, we found that 1245-1130cm-1 and 1070-1010cm-1 showed the strong correlation with each component of the sample mixture: all the correlation coefficients were 1.000 and quantitative errors did not exceed 0.32%. From this result, we concluded that PLS method and MSC method are very useful and can be successfully applied to Quality control.

  • PDF

A Comparative Study on the Construction Contract Method of Korea and China (한국과 중국의 건설 계약 방식 비교연구)

  • Jang, Ryu-Wee;Lee, Yoon-Sun;Kim, Jae-Jun
    • Proceedings of the Korean Institute Of Construction Engineering and Management
    • /
    • 2007.11a
    • /
    • pp.662-665
    • /
    • 2007
  • There are many contract patterns in the international construction market, such as CM, EPC, PM and so on. To be geared to international standards, the Construction Ministry of P.R.C improved the laws and regulations related to the construction contract. Therefore, some international contract patterns are available in China now, but the application of the international contract patterns is still in the early stage, At the same time South Korea has made a great achievement to use the international contract patterns in the practical projects. This pater carried out a study to identify differences of construction contract patterns between these Chinese construction market and Korean construction market, and to learn from each other to gain more experiences.

  • PDF

Comparison of Parallel Preconditioners for Solving Large Sparse Linear Systems on a Massively Parallel Machine (대형이산 행렬 시스템의 초대형병렬컴퓨터에서의 해법을 위한 병렬준비 행렬의 비교)

  • Ma, Sang-Baek
    • The Transactions of the Korea Information Processing Society
    • /
    • v.2 no.4
    • /
    • pp.535-542
    • /
    • 1995
  • In this paper we present two preconditioners for solving large sparse linear systems arising from elliptic partial differential equations on massively parallel machines, such as the CM-5. Most massively parallel machines do heavily rely on the message-passing for the interprocessor communications. but according to the current manufacturing standards the cost of communications is very high compared to that of floating point arithmetic computations. Due to this we need an algorithm which minimizes the amount of interprocessor communication on the massively parallel machines. We will show that Block SOR(Successive Over Relaxation) method coupled with the multi-coloring technique is one of such preconditioner on the massively parallel machines, by conducting experiments in the CM-5. Also, we implemented the ADI(Alternation Direction Implicit) method in the CM-5, which has been conventionally one of the most powerful parallel preconditioner. Our experiment shows that Block SOR method coupled with the multi-coloring technique could yield a speedup with 50% efficiency with the range of number of processors form 16 to 512 for a matrix with dimension 512x512. On the other hand, the ADI method shows a very poor performance.

  • PDF

Evaluation of sensitivity of soil respiration to temperature in different forest types and developmental stages of maturity using the incubation method

  • Lee, Eun-Hye;Suh, Sang-Uk;Lee, Chang-Seok;Lee, Jae-Seok
    • Journal of Ecology and Environment
    • /
    • v.35 no.1
    • /
    • pp.1-7
    • /
    • 2012
  • To calculate and predict soil carbon budget and cycle, it is important to understand the complex interrelationships involved in soil respiration rate (Rs). We attempted to reveal relationships between Rs and key environmental factors, such as soil temperature, using a laboratory incubation method. Soil samples were collected from mature deciduous (MD), mature coniferous (MC), immature deciduous (ID), and immature coniferous (IC) forests. Prior to measure, soils were pre-incubated for 3 days at $25^{\circ}C$ and 60% of maximum water holding capacity (WHC). Samples of gasses were collected with 0, 2, and 4 h interval after the beginning of the measurement at soil temperatures of 5, 15, 25, and $35^{\circ}C$ (at 60% WHC). Air samples were collected using a syringe attached to the cap of closed bottles that contained the soil samples. The $CO_2$ concentration of each gas sample was measured by gas chromatography. Rs was strongly correlated with soil temperature (r, 0.93 to 0.96; P < 0.001). For MD, MC, ID, and IC soils taken from 0-5 cm below the surface, exponential functions explained 90%, 82%, 92%, and 86% of the respective data plots. The temperature and Rs data for soil taken from 5-10 cm beneath the surface at MD, MC, ID, and IC sites also closely fit exponential functions, with 83%, 95%, 87%, and 89% of the data points, respectively, fitting an exponential curve. The soil organic content in mature forests was significantly higher than in soils from immature forests (P < 0.001 at 0-5 cm and P < 0.005 at 5-10 cm) and surface layer (P = 0.04 at 0-5 cm and P = 0.12). High soil organic matter content is clearly associated with high Rs, especially in the surface layer. We determined that the incubation method used in this study have the possibility for comprehending complex characteristic of Rs.

Effect of Stem Number and Propagation Method on Yield Components of Boxthorn(Lycium chines Mill.) (주당 적정줄기수와 번식방법이 구기자의 수량형질에 미치는 영향)

  • 이봉춘
    • Korean Journal of Plant Resources
    • /
    • v.9 no.1
    • /
    • pp.71-75
    • /
    • 1996
  • Experiments were conducted to investigate the proper stem number and the propagation method of Lycium Chinense Mill. from 1993 to 1994.The results obtained were summerized as follows. The most effective propagation method was stem cutting 20cm in which flowering time was 15days earlier and dry fruit weight was 30 percent heavier(91kg/10a) than in seed propagation. The optimal diameter of cutting was 0.9cm of which dry fruit weight was 227kg/10a and 28 percent heavier compared with that of 0.5cm. stem number 5 had the best top growth and the heaviest 100 fruit weight as 13.4g. Fruit number per plant was increased as 864 in stem number 5. Dry fruit yield of stem number 5 was 104kg/10a and 16 percent increased compared with that of control.

  • PDF

Mulching Cultivation Method and Harvesting Implement of Pleurotus ostreatus (느타리버섯 멀칭재배 방법과 수확도구)

    • Korean Journal of Plant Resources
    • /
    • v.12 no.3
    • /
    • pp.179-185
    • /
    • 1999
  • The study which was conducted to determine the effects of the polyethylene film on the culture of Pleurotus ostreatus is summarized in the following: 1) The fresh weight of Pleurotus ostreatus cultured by the box culture method mulching with black polyethylene film was 2,237g/box and, 2,028g/box by white polyethylene film mulching, and 1,695g/box at the conventional culture which was by 24.2% and 16.4% higher than that of the conventional culture.2) The fresh weight of P. ostreatus cultured by the shelf culture method mulching with the black polyethylene film was 17.4kg/m$^2$ at the white polyethylene film culture, 14.6kg/m$^2$ at the conventional culture which was by 16.2%, 7.5% higher than that of the conventional culture. 3) The best shape appearance in terms of the diameter in P. ostreatus was 5~30mm and the intervals were 10cm respectively. 4) The black polyethylene film mulching in P. ostreatus observed in good protection against Pseudomonas spp., Trichoderma, or mushroom flies. 5) The black polyethylene film mulching method for the culture of P. ostreatus was much better than that of the shelf-culture, box-culture or the sack culture in terms of total yield and quality. 6) The length of harvesting implement of P. ostreatus was suitable for 45~120cm in order to use on the harvest of the mulching.

  • PDF

Chemical control of Sycamore Lace Bug, Corythucha ciliata(Say) (버즘나무방페벌레의 약제방제(藥劑防除)에 관(關)한 연구(硏究))

  • Kim, Chul-Su;Park, Ji-Doo;Byun, Byung-Ho;Park, Il-Kwon;Chae, Chung-Suck
    • Journal of Korean Society of Forest Science
    • /
    • v.89 no.3
    • /
    • pp.384-388
    • /
    • 2000
  • For the control of Corythucha ciliata, the insecticidal activity of five commercial pesticides (Monocrotophos 25%SL, Phosphamidon 50%SL, Imidacloprid 20%DC, Thiamethoxam 15%DC and Acetamiprid 20%SL) were examined with trunk injection method in Seoul, Sanbon and Chungju. The insecticidal activity of five commercial pesticides was >88%. The insecticidal activity of Monocrotophos maintained 31 days later after trunk injection when treated leaves were supplied to this pest. This result indicates that one application of trunk injection is enough to control this pest, and this method can save the control cost compared with ground application which should be applied two or three times per year to control this pest. To make the model of treatment dosage at each D.B.H class (cm), $1.0m{\ell}/DBH$, $1.5m{\ell}/DBH$ and $2.0m{\ell}/DBH$ pesticide dosage was used. At <20cm, the insecticidal activity of $1.0m{\ell}$ dosage was >95%, and $1.5-2.5m{\ell}$ dosage was needed for the effective control at 30~50cm. More than $2.5m{\ell}$ dosage was effective at >50cm. Spray method was used in laboratory to select pesticides for ground application. Three commercial pesticides (Ethofenprox 20%EC, Ethofenprox 10%WP and Cyfluthrin 1%EC) were used, and all pesticides showed >95% insecticidal activity.

  • PDF