• Journal of the Korean Geographical Society
• /
• v.46 no.4
• /
• pp.425-441
• /
• 2011

Ridge traversing trail in Mount Jiri National Park is classified as flat, gully-like, unilateral, and asymmetric bilateral, paths based on a location and gradient of paths. These types are interchangeable due to a drainage condition of trail surfaces. Using a rapid survey, the trail is 135.9 cm wide, 23.6 cm deep and $5.1^{\circ}$ in a gradient, respectively. All treads have been compacted due to human trampling. The path width is affected by a slope aspect and a distribution of Sasa borealis. An asymmetric path is wider than a symmetric path. A soil erosion rate is equivalent to $68.9cm^2/year$ for the period from 1960 to 2009, suggesting that the trail has been widened 2.7 cm/year and the tread lowered 0.4 cm/year. Trampling and needle ice action combined with rainwash induced by a pipeflow are dominant erosion processes contributing to the trail expansion.

• Journal of the Korean Home Economics Association
• /
• v.43 no.5 s.207
• /
• pp.117-130
• /
• 2005

Western clothing is adjusted to the figures of the human body unlike Korean traditional clothes. For this adjustment, we need a method, known as dart, to reasonably adjust a wide circumference to curves of the human body. So far, there has been some research in the aspect of clothing engineering on how to decide darts of skirts or trousers, but no theoretical research has yet been conducted on how to decide the number and amount of dart, which has caused difficulties in beginners' understanding of dart. Futhermore, there is no consistent drawing method for the number and amount of darts in existing teaching and teaming materials. Therefore, to develop teaching and teaming methods for darts, this study identified the amount and number of darts for waist girth of 66-72cm and a hip girth of 86-102cm. When the difference between the waist girth and the hips girth, including margins, is above a minimum of 26cm, two darts can be designed, but when the difference is below 24cm, one dart is necessary. The amount of darts increases by 0.5cm for every 2cm increase of the hip girth to the waist girth. In addition, as darts become longer, the cutting of the waist line becomes smoother. For one, rather than two, darts the curve of the waist line is steeper. Based on the above results, it was assured that when belts are curved through adjustment to the waist line of skirts or slacks, their composition can be stable. Therefore, in basic teaching about slacks and skirts, the number and amount of the darts should be designed according to the difference between the girths of the waist and the hip. This difference should be a minimum of 24cm, but if it is below 24cm, the number of darts needed is one.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.54-55
• /
• 2014

The structure of construction management service in the Construction Technology Management Act has changed recently. The new Construction Technology Promotion Act becomes effective to support and promote the development of related construction industries and construction technology for domestic and overseas markets. The purpose of research is to analyze the main contents of Construction Technology Promotion Act and to investigate corporate status, problems, and issues. The research is conducted to improve as reorganization of the CM service system based on the interviews with experts. Accordingly the research is to derive countermeasures of CM enterprises. The research results are presented in the following categories of contract awarding, project management, human resource management, general administration and staff education management as countermeasures of enterprises.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.765-766
• /
• 2015

We present a color-magnitude (CM) diagram of M35, an open cluster. A DSLR camera was used for measuring the color index with the RGB channels. It is cost-effective and has relatively easy controls compared to astronomical CCDs for educational environments. The 8-inch refracting telescope was used at the Korea Science Academy of KAIST in Busan. The B-G color index was obtained from observations and the magnitudes from publications in order to draw CM diagram. The linear correlation of B-G to B-V is found. The RGB channel of the DSLR camera can be easily represented on the CM diagram for astronomical education with aid of easy controls.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.9
• /
• pp.1392-1396
• /
• 2004

The micellization of dodecylpyridinum chloride (DPC) assembled on aqueous gold nanoparticles has been studied as a function of concentration using Surface-Enhanced Raman Scattering (SERS). At the low concentration, the strong SERS band of the benzene ring moiety was observed at 1025 $cm^{-1}$, and assigned to “trigonal ring breathing”. According to high concentration of DPC, a new strong band was also appeared at 1012 $cm^{-1}$, which was assigned to “totally symmetry ring breathing”. The difference of two spectra seems to ascribe to the geometry of polar head group, i.e., pyridinium cation. These geometry exist flat-down at low concentration, whereas standing-up or tilted geometry at high concentration. The critical micelle concentration (CMC) was first obtained from the ratio of intensities of the two bands related to the benzene ring moiety by vibrational spectroscopy, and was about 28 mM. After the CMC, the benzene ring moiety in the micelle state was more restricted than in monomer state because there is no more change of intensities at 1012 $cm^{-1}$. In addition, the size of gold-assembled micelle was estimated using light scattering and it was about 328.3 nm.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.137-140
• /
• 1987

New platinum chain compounds, $[M(en)_2]_{0.80}[Pt(ox)_2]{\cdot}2H_2O$ where M = Cu or Pt, en = ethylenediamine and ox = oxalate, have been prepared and found to have a commensurate Peierls structure as evidenced by the five-fold Pt chain periodicity and unusually low electrical conductivity $(1.5{\times}10^{-5}{\sim}5.7{\times}10^{-3}S/cm)$. Including two other compounds with the Peierls structure, their characteristic features were deduced and explained from the point of view of the band theory.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.3
• /
• pp.95-107
• /
• 2013

In order to examine the temperature regime responsible for periglacial processes, air and ground temperatures were monitored from October 2010 to May 2011 at a subalpine bare patch (1,710m asl) of Mt. Halla. Four thermistor sensor probes were installed at 55 cm above a ground surface and depths of 2 cm, 10 cm, and 20 cm, respectively. A mean air temperature is $-0.1^{\circ}C$, while mean ground temperatures are $1.8^{\circ}C$ at 2 cm, $2.6^{\circ}C$ at 10 cm and $3.2^{\circ}C$ at 20 cm deep. A mean monthly ground temperature at 2 cm deep demonstrates below $0^{\circ}C$ successively from January to March, while those at 10 cm and 20 cm deep show no sub-zero temperature. A total of 72 freeze-thaw cycle was observed in air temperature. However, the numbers in ground temperature reduced into 17 at 2 cm, 8 at 10 cm, and 3 at 20 cm deep. The cycles of air temperature and ground temperature at 2 cm deep mostly fluctuated diurnally, while those of ground temperature at 10 cm and 20 cm deep exhibited a several-daily oscillation. Snow cover over 55 cm high remained from January to early April, and it seemed to disappear completely on April 16. A seasonal frost of at least 2 cm thick was formed on late December and the isotherm of $0^{\circ}C$ descended slowly into 10 cm deep on late March to early April due to the insulating snow cover. It showed the maximum freezing depth of 20 cm on April 7 to 14 and then thawed rapidly so that the frozen ground did not longer after April 17. Periglacial processes are predominant during a freezing period than a thawing period when the ground surface is still covered with snow. The periglacial mass movement in the subalpine zone of Mt. Halla is mainly generated by frost creep in terms of the occurrence depth of diurnal freeze-thaw cycle and the maximum freezing depth of ground.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.48-48
• /
• 2019

Amorphophallus paeoniifolius (Dennst.) Nicolson는 영명으로 Elephant yam 또는 Whitespot giant arum 으로 불리는 천남성과(Araceae) 식물로 동아시아, 뉴기니, 오세아니아, 마다가스카르 등지에서 자생하고 있으며 숲의 가장자리 또는 2차림에서 발견 된다. 다년생 식물로 덩이줄기는 어두운 갈색의 둥근모양으로 직경 20~25 cm로 자라고 수염뿌리가 사방으로 달린다. IUCN 적색목록(Red List)에 관심대상 종(LC: Least Concern)에 속하는 식물이다. 현지인들은 마(Dioscorea Polystachya Turcz.)처럼 채소로 먹기도 하며 약용으로 쓰이기도 하는데 복부장애, 소화불량, 천식, 기관지염, 빈혈 등에 약효가 있다. Amorphophallus paeoniifolius은 $25^{\circ}C{\sim}35^{\circ}C$, 연강수량 1,000~1,500 mm에서 잘 자란다. 가운데 눈이 올라오면서 생장을 시작하고 며칠이 지나서야 잎 또는 꽃으로 자라는지 알 수 있다. 잎의 생육주기는 잎눈이 생장을 시작하면 잎자루 끝에 소엽과 소잎자루가 접힌 채로 올라온다. 소엽들이 펴지면서 완전한 모습을 갖추는데 30일 이상의 생장기간을 갖는다. 잎의 형태는 우상복엽(pinnate compound leaf)으로 우산처럼 보이는 잎 하나로 광합성을 한다. 잎은 최대 높이 2.5~3 m, 너비 3 m까지 자라며, 잎자루의 색은 녹색과 청색으로 얼룩덜룩한 무늬가 있다. 인공환경 조건에서 Amorphophallus paeoniifolius 생활사 중 잎의 주기를 연구하기 위해서 광, 온도 등의 지상부 환경은 열대 및 아열대 식물의 자생지와 유사하게 조성하였고, 지하부 환경은 인공 배합토를 사용하여 조성하였다. 평균온도는 $25{\sim}28^{\circ}C$, 겨울철 최저 $16^{\circ}C$, 여름철 최고 $33^{\circ}C$를 유지 관리 하였다. 자동 환경제어시스템으로 온도 및 환기를 유지 관리하고 필요에 따라 수동제어 관리를 병행하여 조절하였다. Amorphophallus paeoniifolius는 잎을 먼저 생성하고 광합성으로 생산된 영양물질을 덩이뿌리에 저장을 하고 그 영양물질을 이용하여 꽃을 피우는 생육 특성을 지닌다. 실험에 사용된 공시 식물은 2018년 12월 미얀마에서 생체(덩이줄기) 형태로 도입되었다. 화분에 식재 후 약 5개월이 지난 시점에서 잎의 생장이 시작되었다. 2019년 7월 29일 기준으로 높이 80 cm, 너비 60 cm의 크기로 성장하였으며, 생육환경에 따라 3~5개월 뒤 잎이 지고 나면 다시 덩이줄기로 되돌아갈 것으로 판단된다. 하지만 지금까지 이 식물에 알려진 정보는 인공환경에서의 연구가 아닌 자연환경에서의 연구결과이기 때문에 인공적인 온실 환경에서 자란 Amorphophallus paeoniifolius는 잎의 주기는 더 오래 갈 수도 있으며 꽃의 주기 또한 느리거나 빠를 수 있다. 잎의 생장주기(Leaf Cycle)시 잎자루가 낮과 밤의 방향을 달리 하여 자라는 것이 관찰되었다. 이는 광합성을 위해서 잎자루의 방향을 햇빛 방향으로 돌리는 것으로 판단된다. Amorphophallus paeoniifolius를 실내 조경 식물 또는 식 약용의 소재식물로 활용하기 위해서는 꽃의 생장주기 등 추가적인 모니터링과 연구가 필요하다.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.3
• /
• pp.22-27
• /
• 2023

Magnetic properties of MgB₂ superconducting powder were investigated. M(H), the magnetic field H dependence of magnetization M, was measured and analyzed using a PPMS instrument. The MgB₂ superconducting powder showed high critical current density J_c > ~ 10⁷ A/cm² and clean limit superconducting properties. The equilibrium magnetization M_eq properties of MgB₂ powders exhibiting various superconducting properties were studied. We find that the equilibrium magnetization M_eq(H) properties of MgB₂ powders showing conventional BCS properties deviate from the predictions of the standard local-London theory at temperatures below T = 19 K and are in good agreement with the generalized nonlocal-London theory. Nonlocal-London analysis was used to determine and analyze the nonlocal parameters. The temperature dependence of the London penetration depth values λ(T) was studied.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.3-14
• /
• 2015

Since the global financial crisis, the Korean domestic construction market has continuously experienced downturns, and the Korean domain construction firms'profitability has been persistently deteriorated. Domestic construction firms have rapidly advanced to overseas markets exclusively for the construction contract packages. However, the profitability for the construction contracts has been lower compared to engineering or project management contracts. One of the critical issues the Korean firms have faced was project management capability across all phases in project execution. Even though several project management capability assessment tools were introduced, most tools were applicable to a wide variety of industry sectors rather than construction industry. Project management capability assessment tool specifically applicable to domestic CM firms was developed through this research, in order to assess project and program management capabilities and improve the competitiveness in overseas market Also, the correlation between project, programs, and the CM infrastructure were identified. The CM firms were divided into two groups according to the size of the business, and both were evaluated at the project and the program level based for the 9 different criteria. The project management capability assessment tool developed for the CM firms can be used for self-assessment to distinguish the strengths and weaknesses of each company at the project and program level. In addition, the current status of each group can be identified by spotting improvement areas for the management capabilities.