• Korean Journal of Environment and Ecology
• /
• v.30 no.6
• /
• pp.1009-1021
• /
• 2016

The community structure and abundance of epilithic biofilm were bimonthly examined to know spatial and temporal patterns of biofilm biomass and taxonimical composition at the two study sites, Gosapo and Gyeokpo with different degrees of wave exposure levels from November 2010 to September 2011. Biomass was estimated by using chlorophyll a contents (Chl a), normalized difference vegetation index (NDVI), and vegetation index (VI). Cyanobacteria such as Aphanotece spp. predominated in the proportion of 57.53% at Gosapo and of 61.12% at Gyeokpo and they are abundant in mid shore and in summer at both study sites. The diatoms Navicula spp., Achnanthes spp. and Licmophora spp. were common species and they showed an increasing trend from high to low shore. NDVI, VI, and chl a contents were the greatest at mid shore for Gosapo (0.44, 3.05, $24.56{\mu}g/cm^2$) and at low shore for Gyeokpo (0.41, 2.73, $17.98{\mu}g/cm^2$). NDVI, VI, and chl a content were all maximal in January and minimal in March at the both sites. Average NDVI, VI, and chlorophyll a contents of biofilms were greater at Gosapo (0.43, 2.89, $22.84{\mu}g/cm^2$) than Gyeokpo (0.38, 2.48, $15.48{\mu}g/cm^2$).Of three shore levels(high, mid, and low) Chl a contents were positively correlated with NDVI and VI at the two study sites indicating that non-destructive NDVI and VI values can be used in stead of destructive Chl a extraction method. In conclusion, epilithic biofilm was more abundant seasonally in winter, vertically in mid and low intertidal zone, and horizontally at wave exposed shore than in summer, at high and sheltered shore in Korea.

• Korean Journal of Plant Resources
• /
• v.21 no.1
• /
• pp.36-40
• /
• 2008

To product grafts and construct its spread-system effectively, this study was carried out to investigate into effects on the survival percentage and growth in walnut trees(Juglans sinensis Dode) according to transplanting type and post-epicotyl grafting treatment. In the average survival percentage of the grafting according to post-epicotyl grafting transplanting type, TPGB1(transplanting in grafting bed) showing 89.02% was highest. Also, the survival percentage was different from appropriate temperature and humidity within treatment. As a result of the average survival percentage of the grafting by species, KWN-3 having 81.59% was highest with high survival percentage of total treatment in general. In addition, it is concluded that the nutrition condition of scions and collecting parts are strongly related to survival percentage on having significantly difference of its survival percentage by species. The growth rate of the survival grafts by transplanting type after grafting revealed that all of the investigation items(height and diameter growth of grafts, diameter growth of scions and etc.) resulted in same trend. TPGB1 having the highest tree height growth, 15.97cm($2.0{\sim}59.0cm$), showed the highest growth on diameter growth of shoots, 7.55mm($1.65{\sim}14.71mm$), and scions, 8.12mm($1.82{\sim}13.58mm$), as well. In the growth of each treatment according to different developing parts of shoots in grafts, the lateral bud, 12.05cm, was much superior to the terminal bud,9.57cm, on only graft height growth. However, the survival rate according to collecting parts of scions and developing parts of shoots with same treatment was not different with among-species.

• Progress in Medical Physics
• /
• v.23 no.3
• /
• pp.145-153
• /
• 2012

In this study, we quantify the residual motion artifact in 4D-CT scan using the dynamic lung phantom which could simulate respiratory target motion and suggest a simple one-dimension theoretical model to explain and characterize the source of motion artifacts in 4DCT scanning. We set-up regular 1D sine motion and adjusted three level of amplitude (10, 20, 30 mm) with fixed period (4s). The 4DCT scans are acquired in helical mode and phase information provided by the belt type respiratory monitoring system. The images were sorted into ten phase bins ranging from 0% to 90%. The reconstructed images were subsequently imported into the Treatment Planning System (CorePLAN, SC&J) for target delineation using a fixed contour window and dimensions of the three targets are measured along the direction of motion. Target dimension of each phase image have same changing trend. The error is minimum at 50% phase in all case (10, 20, 30 mm) and we found that ${\Delta}S$ (target dimension change) of 10, 20 and 30 mm amplitude were 0 (0%), 0.1 (5%), 0.1 (5%) cm respectively compare to the static image of target diameter (2 cm). while the error is maximum at 30% and 80% phase ${\Delta}S$ of 10, 20 and 30 mm amplitude were 0.2 (10%), 0.7 (35%), 0.9 (45%) cm respectively. Based on these result, we try to analysis the residual motion artifact in 4D-CT scan using a simple one-dimension theoretical model and also we developed a simulation program. Our results explain the effect of residual motion on each phase target displacement and also shown that residual motion artifact was affected that the target velocity at each phase. In this study, we focus on provides a more intuitive understanding about the residual motion artifact and try to explain the relationship motion parameters of the scanner, treatment couch and tumor. In conclusion, our results could help to decide the appropriate reconstruction phase and CT parameters which reduce the residual motion artifact in 4DCT.

• Journal of the Korean earth science society
• /
• v.28 no.4
• /
• pp.478-490
• /
• 2007

With groundwater data of seawater intrusion monitoring network in coastal areas of Korea's main land, we analyzed types of seawater intrusion through the coastal aquifer. The data including groundwater level, temperature and electrical conductivity obtained from 45 monitoring wells at 25 watershed regions were evaluated. Based on statistical analysis, correlation analysis and variation type analysis, groundwater levels were mainly affected by rainfall and artificial pumping. About 78% of the monitoring wells showed average temperature higher than $15^{\circ}C$ and about 58% of them showed minimum variations less than $0.2^{\circ}C$. Electrical conductivities showed a large magnitude of variation and irregular characteristics compared with groundwater levels and temperatures. Average electrical conductivities lower than $2,000\;{\mu}S/cm$ were observed at 28 monitoring wells while those of higher than $10,000\;{\mu}S/cm$ were done at 9 monitoring wells. From the cross-correlation analysis, groundwater levels were mostly affected by precipitation while temperature and electrical conductivity showed very low correlation. Meanwhile tidal variations strongly affected the groundwater levels comparing to precipitation. We classified the long-term monitoring data according to variation types such as constant process, linear trend, cyclic variation, impulse, step function and ramp. Impulse type was dominant for variations of groundwater level, which was largely affected by rainfall or artificial pumping, the constant process was dominant for temperature. Compared with groundwater level and temperature, electrical conductivities showed various types like linear trend, step function and ramp. According to the discrepancy of variation characteristics for monitoring data at each well in the same region, periodical analysis of monitoring data is essentially required.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.156-168
• /
• 2012

Chrysanthemum is a cut flower species that normally lasts for 1 to 2 weeks, in some cases 3-4 weeks. This has been attributed to low ethylene production during senescence. Reduction in cut flower quality has been attributed to the formation of air embolisms that partially or completely blocks the water transport from the vase solution to the rest of the cut flower stem, increasing hydraulic resistance which may cause severe water stress, yellowing, wilting of leaf, and chlorophyll degradation. Standard type chrysanthemum can be harvested when buds were still tightly closed and then fully opened with the simple bud-opening solution. Standard type chrysanthemum can also be harvested when the minimum size of the inflorescence is about 5-6 cm bud which opened into the first flower full-sized flower. While spray varieties can be harvested when 2-4 most mature flowers have opened (40% opening). Cut flowers are sorted by stem length, weight, condition, and so on. Standard chrysanthemum is 80 cm length for standard type and 70cm for spray type. Pre-treatment with a STS, plant regulator such as GA, BA, 1-MCP, chrysal, germicide, and sucrose, significantly improved the vase life and quality of cut flowers. It is well established that vase solutions containing sugar can improve the vase life of cut chrysanthemum. Chrysanthemum is normally packed in standard horizontal fiberboard boxes. Chrysanthemum should normally be stored at $5{\sim}7^{\circ}C$. Precooling resulted in reduction in respiration, decomposition, and transpiration activities as well as decoloration retardation. There was significant difference between "wet" storage in 3 weeks and "dry" storage in 2 weeks. In separate pulsing solution trials, various germicides were tested, as well as PGRs to maintain the green color of leaves and turgidity. Prolonging vase life was attained with the application of optimal solution such as HQS, $AgNO_3$, GA, BA and sucrose. This also retarded senescence in leaves of cut flower stems. Fresh cut chrysanthemum can be transported using a refrigerated van with $5{\sim}7^{\circ}C$. Increasing consumption and usage of cut chrysanthemum of various cultivars would require efficient transport system, and effective information exchange among producer, wholesaler, and consumer.

• Current Photovoltaic Research
• /
• v.6 no.2
• /
• pp.43-48
• /
• 2018

The traditional silicon heterojunction solar cells consist of intrinsic amorphous silicon to prevent recombination of the silicon surface and doped amorphous silicon to transport the photo-generated electrons and holes to the electrode. Back contact solar cells with silicon heterojunction exhibit very high open-circuit voltages, but the complexity of the process due to form the emitter and base at the backside must be addressed. In order to solve this problem, the structure, manufacturing method, and new materials enabling the carrier selective contact (CSC) solar cell capable of achieving high efficiency without using a complicated structure have recently been actively developed. CSC solar cells minimize carrier recombination on metal contacts and effectively transfer charge. The CSC structure allows very low levels of recombination current (eg, Jo < 9fA/cm2), thereby achieves high open-circuit voltage and high efficiency. This paper summarizes the core technology of CSC solar cell, which has been spotlighted as the next generation technology, and is aiming to speed up the research and development in this field.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.105-109
• /
• 2017

The effect of temperature and vanadium metal concentration on the electronic and thermoelectric properties of Si in the diamond cubic structure has been investigated using a combination of density functional theory simulations and the semi classical Boltzmann's theory. The BotzTrap code within the constant relaxation time approximation has been used to obtain the Seebeck coefficient and other transport properties of interest for alloys of the structure $Si_{1-x}V_x$, where x is 0, 0.125, 0.25, 0.375, and 0.5. The thermoelectric properties have been extracted for a temperature range of 300 K to 1,000 K. The general trend with V atom substitution for Si causes the Seeback coefficient to increase and the thermal conductivity to decrease for the various alloys. The optimum values are for $Si_5V_3$ and $Si_4V_4$ alloys for charge carrier concentrations of $10^{21}cm^{-3}$ in the mid temperature range of 500~800 K. This is a very desirable effect for a promising thermoelectric and the figure of merit ZT approaches 0.2 at 600 K for the p-type $Si_5V_3$ alloy.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1076-1085
• /
• 2001

Experimental investigations of the longitudinal vortices, which are produced by wing type vortex generators set up behind a circular cylinder in a rectangular channel, are presented. When the circular cylinder is set up in the rectangular channel, a horseshoe vortex is formed just upsteam of the circular cylinder. It generates a turbulent wake region behind the circular cylinder. Therefore, the region of the pressure loss behind the circular cylinder in increased and the size of the wake is small. These problems can be achieved by longitudinal vortices which are generated by wing-type vortex generator. In order to control the strength of longitudinal vortices, the angle of attack of the vortex generators is varied from 20 degree to 45, but the spacing between the vortex generators is fixed 6cm. The 3-dimensional mean velocity measurements are made using a five-hole probe. The vorticity field and streamwise velocity contour are obtained from the velocity field. The following results are obtained. Circulation strength is the maximum value when the angle of attack($\beta$) is $30^{\circ}$, and the vorticity field and streamwise velocity contour in case of $\beta$=$20^{\circ}$ show the trend similar to these in case of $\beta$=$30^{\circ}$, but do not in case of $\beta$=$45^{\circ}$.

• Korean journal of food and cookery science
• /
• v.16 no.1
• /
• pp.75-83
• /
• 2000

The effects of salting methods on sensory and microbiological properties of Kakdugi were evaluated during fermentation at 10$\^{C}$ for up to 52 days. Kakdugi samples were prepared by 4 different salting methods at the final salt concentration about 1.5%, which was appropriate for organoleptic quality. The salting methods for radish cubes(2cm size) of Kakdugi included; 1) Treatment S-1: spraying dry salt uniformly onto the radish cubes, at the concentration of about 1.5%(w/w) and cured for 1 hr, 2) Treatment S-5: spraying dry salt uniformly onto the radish cubes, at the concentration of about 1.2%(w/w) and cured for 5 hr, 3) Treatment B-1: brining radish cubes in a 8.5%(w/v) salt solution and cured for 1 hr, 4) Treatment B-5: brining radish cubes in a 4.0%(w/v) salt solution and cured for 5 hr. During the early stage of fermentation, sensory test showed higher scores in the overall acceptability of Kakdugi prepared with salting methods S-1 and S-5 than those with B-1 and B-5. However, the trend of acceptability has been reversed by the treatments B-1 and, more notably, by B-5 at the later stage of fermentation. The counts of lactic acid bacteria increased remarkably and then decreased gradually after the optimum ripening period. The major lactic acid bacteria isolated and identified from Kakdugi were Pediococcus, Streptococcus, Leuconostoc, and Lactobacillus.

• 한국해양학회지
• /
• v.11 no.1
• /
• pp.1-8
• /
• 1976

This work concerns ecological studies on the larvae of the ark shell, Anadara broughtonii(SCHRENCK), in the aea adjacent to Gajyo-do in Jinhae Bay. Marine environmental factors, namely, temperatue, salinity, depth, and tidal current were observed in connection with the larval distributions. Water temperature appeared to be one of the main factors that influence the spawning activity. The numbers of the drifting larvae fluctuated greatly during the study period. The trend, however, was for numbers to be low in early summern, increasing in mid summer, and reaching a peak in late summer, at high bottom water temperature and low bottom salinities. Significantly increased numbers of the drifting larvae were observed during the period in which the bottom water temperatures and salinities were very close to those at the surface. the numbers of the drifting larvae showed a positive relationship with velocities of the water mass within the range of 0∼20 cm/sec. It was also noticed that the drifting larvae were relatively abundant in the area of eddy motion.