• KIISE Transactions on Computing Practices
• /
• v.22 no.7
• /
• pp.303-309
• /
• 2016

Recently, an increasing number of embedded processors such as ARM Mali begin to support GPGPU programming frameworks, such as OpenCL. Thus, GPGPU technologies that have been used in PC and server environments are beginning to be applied to the embedded systems. However, many embedded systems have different architectural characteristics compare to traditional PCs and low-power consumption and real-time performance are also important performance metrics in these systems. In this paper, we implement a parallel AES cryptographic algorithm for a modern embedded GPU using OpenCL, a standard parallel computing framework, and compare performance against various baselines. Experimental results show that the parallel GPU AES implementation can reduce the response time by about 1/150 and the energy consumption by approximately 1/290 compare to OpenMP implementation when 1000KB input data is applied. Furthermore, an additional 100 % performance improvement of the parallel AES algorithm was achieved by exploiting the characteristics of embedded GPUs such as removing copying data between GPU and host memory. Our results also demonstrate that higher performance improvement can be achieved with larger size of input data.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.314-320
• /
• 1999

Several bisphosphine- and bisphosphite-substituted Re-imido complexes have been prepared from Re(NPh)(PPh3)2Cl3, 1, and Re(N-C6H3-i-Pr2)2Cl3(py), 4. Compound 1 reacted with trimethyl phosphate (P(OMe)3) to give a mixture of two isomers,mer,trans-Re(NPh)(P(OMe)3)2Cl3, 2, and fac,cis-Re(NPh)(P(OMe)3)2Cl3, 2a. In this reaction, the mer,trans-isomer is a major product. Complex 1 also reacted with triethylphosphine (PEt3) to exclusively give mertrans-Re(NPh)(PEt3)2Cl3, 3. Compound 4 reacted with trimethylphosphine (PMe3) to give mer,trans-Re(N-C6H3-i-Pr2)(PMe3)2Cl3, 5, which was converted to mer-Re(N-C6H3-i-Pr2)(PMe)(OPMe3)Cl3, 6, on exposure to air. Crystallographic data for 2: monoclinic space group P21/n, a = 8.870(2) Å, b = 14.393(3) Å, c = 17.114(4) Å, β = 101.43(2)°, Z = 4, R(wR2) = 0.0521(0.1293). Crystallographic data for 5: orthorhombic space group P212121, a = 11.307(l) Å, b = 11.802(l) Å, c = 19.193(2) Å, Z = 4, R(wR2) = 0.0250(0.0593). Crystallographic data for 6: orthorhombic space group P212121, a = 14.036(4) Å, b = 16.486(5) Å, c = 11.397(3) Å, Z = 4, R(wR2) = 0.0261(0.0630).

• Journal of Nutrition and Health
• /
• v.39 no.8
• /
• pp.795-800
• /
• 2006

In order to examine nutritional and behavioral risk factors of atopic dermatitis (AD) in Korean preschoolers, we analyzed data on 144 children aged 3-6 years with AD and their 434 healthy counterparts. The data included breast-feeding history, current weight, food behaviors assessed by the Mini Dietary Assessment (MDA), food intake by a semi-quantitative food frequency questionnaire, and behavior problems by the Preschool and Kindergarten Behavior Scale (PKBS). Multivariate logistic regression analyses were performed after controlling for preschool location and child's age, gender and total energy intake, as appropriate. There was no group difference of child and household characteristics. Breastfeeding history was related to lower AD risk (OR = 0.63, 95% Cl = 0.40-0.99), yet no statistically significant association was found with overweight status. Regarding food behaviors, AD risk was lower in children who drank milk at least one cup per day (OR = 0.52, 95% Cl = 0.35-0.78) and had regular meals (OR = 0.62, 95% Cl =0.42-0.92). Moreover, there were lower risks of AD in the second (OR =0.48, 95% Cl = 0.28-0.82) and the highest (OR = 0.55, 95% Cl = 0.32-0.94) intake quartiles as compared with the lowest quartile of kimchi intake. Similarly, AD risk was lower in the highest quartile of rice (OR = 0.51 Cl = 0.28-0.93) and the second quartile of fruit (OR =0.45, 95% Cl = 0.25-0.82) intakes. AD children had more problems in social interaction (OR = 1.97,95% Cl = 1.26-3.07) and independence (OR = 1.60, 95% Cl = 1.01 -2.54) measures than the healthy controls. Likewise, AD children tended to show more problem behaviors such as anxiety (OR = 1.63, 95% Cl = 0.99-2.69). Our results suggest that nutritional and behavioral dimensions are related to AD risk, yet the case control study design may preclude generalization of these results.

• Human Ecology Research
• /
• v.57 no.1
• /
• pp.127-142
• /
• 2019

This study investigates factors that impact dating relationship stability(DRS) among college students by applying two key concepts from the Interdependence Theory suggested by Kelly & Thibaut (1978; Thibaut & Kelly, 1959), the comparison level(CL) and comparison level for alternatives($CL_{alt}$). This study also examined mediating effects of commitment on the relationship between CL and DRS and $CL_{alt}$ and DRS. The research used a survey data set drawn from 327 college students currently involved in a dating relationship. The collected data set was then analyzed using SPSS software ver. 23.0 and AMOS software ver. 25.0, to produce the descriptive statistics, Pearson's correlations, and path analysis with bootstrapping. First, both CL and $CL_{alt}$ had a significant direct impact on DRS. In terms of effect size, CL's effect size was comparatively larger than $CL{_{alt}}'s$. The mediating effects from the commitment were evidenced. In the model, the commitment partially mediated the relationships between CL and DRS, and $CL_{alt}$ and DRS. The findings suggest that commitment still plays a key role in dating relationships among college students who currently have a romantic partner. The findings of this study show the possibilities in applying the concepts and theory of interdependence to explain current dating relationships among young adults.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.767-772
• /
• 2012

In support of optimizing electrorefining technology for treating spent nuclear fuel, lithium drawdown has been investigated for separating actinides from molten salt electrolyte. Drawdown reaction selectivity is a major issue that requires investigation, since the goal is to remove actinides while leaving the fission products and other components in the salt. A series of lithium drawdown tests with surrogate fission product chlorides was run to obtain selectivity data with non-radioactive salts, develop a predictive model, and draw conclusions about the viability of using this process with actinide-loaded salt. Results of tests with CsCl, $LaCl_3$, $CeCl_3$, and $NdCl_3$ are reported here. Equilibrium was typically achieved in less than 10 hours of contact between lithium metal and molten salt under well-stirred conditions. Maintaining low oxygen and water impurity concentrations (<10 ppm) in the atmosphere was observed to be critical to minimize side reactions and maintain stable salt compositions. An equilibrium model has been formulated and fit to the experimental data. Good fits to the data were achieved. Based on analysis and results obtained to date, it is concluded that clean separation between minor actinides and lanthanides will be difficult to achieve using lithium drawdown.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.87-94
• /
• 2007

In this paper, with water-LiCl-$CaCl_2-Zn(NO_3)_2$ mixture which utilizes solar energy at the evaporator heat source, a thermodynamic analysis was performed to provide design data for a double-effect absorption heating system. A comparative study of the water-LiCl-$CaCl_2-Zn(NO_3)_2$ mixture against the water-LiBr pair was conducted by a computer simulation. The computer simulation is based on mass, material and heat balance equations for each part of the system. Coefficients of performance and flow ratios for effects of different operating temperatures are investigated. It is found that the heating COP is higher for the water-LiCl-$CaCl_2-Zn(NO_3)_2$ mixture than for the water-LiBr pair, and FR is lower for the former.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.453-454
• /
• 2006

This paper describes a processing verification technique for developing about end-milling cutters. Developed software is processing verification module for manufacturing. By using cutting simulation method, we can obtain center points of finding wheel via Boolean operation between a grinding wheel and a cylindrical workpiece. The obtained CL data can be used for calculating NC data. After then, we can simulate by using designed grinding machine and NC data. This research has been implemented on a commercial CAD system by using the API function programming. The operator can evaluate the cutting simulation process and reduce the time of design and manufacturing.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.3
• /
• pp.116-119
• /
• 2010

The etching characteristics of zinc oxide (ZnO) were investigated, including the etch rate and the selectivity of ZnO in a $Cl_2/BCl_3$/Ar plasma. It was found that the ZnO etch rate, the RF power, and the gas pressure showed non-monotonic behaviors with an increasing Cl2 fraction in the $Cl_2/BCl_3$/Ar plasma, a gas mixture of $Cl_2$(3 sccm)/$BCl_3$(16 sccm)/Ar (4 sccm) resulted in a maximum ZnO etch rate of 53 nm/min and a maximum etch selectivity of 0.89 for ZnO/$SiO_2$. We used atomic force microscopy to determine the roughness of the surface. Based on these data, the ion-assisted chemical reaction was proposed as the main etch mechanism for the plasmas. Due to the relatively low volatility of the by-products formed during etching with $Cl_2/BCl_3$/Ar plasma, ion bombardment and physical sputtering were required to obtain the high ZnO etch rate. The chemical states of the etched surfaces were investigated using X-ray photoelectron spectroscopy (XPS). This data suggested that the ZnO etch mechanism was due to ion enhanced chemical etching.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.547-552
• /
• 2003

In mold machining, there are many concave machining regions where chatter and tool deflection occur since MRR (material removal rate) increases as curvature increases even though cutting speed and depth of cut are constant. Boolean operation between stock and tool model is widely used to compute MRR in NC milling simulation. In finish cutting, the side step is reduced to about 0.3mm and tool path length is sometimes over 300m. so Boolean operation takes long computation time and includes much error if the resolution of stock and tool model is larger than the side step. In this paper, curvature of CL(cutter location) surface and side step of tool path is used to compute the feedrate for constant MRR machining. The data structure of CL surface is Z-map generated from NC tool path. The algorithm to get local curvature from discrete data was developed and applied to compute local curvature of CL surface. The side step of tool path was computed by point density map which includes cutter location point density at each grid element. The feedrate computed from curvature and side step is inserted to new tool path to regulate MRR. The resultants wire applied to feedrate optimization system which generates new tool path with feedrate from NC codes for finish cutting. The system was applied to speaker mold machining. The finishing time was reduced to 12.6%. tool wear was reduced from 2mm to 1.1mm and chatter marks and over cut on corner were removed.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.2
• /
• pp.69-77
• /
• 2001

This paper describes a method of calculating the feedrate for the constant cutting speed at a CL-point in 5-axis machining. Unlike 3-axis machining, 5-axis machining has the flexibility of the tool motions due to two rotation axes. But the feedrate at joint space differs from the feedrate at a tool tip(the CL-point) of the 3D Euclidean space for the tool motions. The proposed algorithm adjusts the feedrate based on 5-axis NC data, the kinematics of a machine, and the tool length. The following calculations is processed for each NC block to generate the new feedrate; 1) calculating the moving distance at the CL-point, 2) calculating the moving time by the given feedrate, 3) calculating the feedrate of each axis, 4) getting the new feedrate. The proposed algorithm was applied to a 5-axis machine which had a tilting spindle and a rotary table. Totally, the result of the algorithm reduced the machining time and smoothed the cutting-load by the constant cutting speed at the CL-point.