• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.8
• /
• pp.791-797
• /
• 2013

This paper proposes a new way to verify the performance of an absorber lined shielded enclosure(ALSE) in accordance with CISPR25, EMC standards dedicated to testing automotive components. CISPR16 requires the use of NSA and VSWR methods to test the performance of a chamber. As for CISPR25, however, there hasn't been standardized ways to verify the performance of ALSE. This paper purports to present an improved method for the verification based on a long-wire antenna method under discussion at CISPR25 JFT. Existing discussions on a long-wire antenna method proposes that an antenna should reach 500 millimeters in length, while this paper adopts the antenna length of 1,700 millimeters. This paper also assesses the effects of matching conditions and studies problems related to methods which have been already proposed and key parameters in order to improve verification methods.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.277-286
• /
• 2010

In this paper we analyse radiation measurement method for UWB wireless system of the wideband low power frequency characteristics. In the radiation measurement environment we discuss RMS electric field strength, UWB PSD, UWB detect signal level, UWB noise signal collection etc.. also, we discuss power measure method of the CISPR16-1, low level e.i.r.p radiation measurement method. lastly we analyse consideration problem for the signal analyser of the UWB system.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.1 s.53
• /
• pp.5-15
• /
• 2005

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.77-83
• /
• 1999

Due to the high cost of constructing anechoic chamber, the multi-usage of a chamber in various applications is very effective in terms of cost as well as space. In this paper, we describe an anechoic chamber currently used at SK Telecom in Korea. This is designed for the measurements of both far/near field antenna and EMC/EMI in the identical chamber. This anechoic chamber and measurement system support antenna test in the frequency range of 150 MHz to 40 GHz and meet the requirement of ANSI C63.4 and CISPR 16.1 for EMC/EMI.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.304-310
• /
• 2011

The application of time-domain methods in emission measurement instruments allows for a reduction in scan time by several orders of magnitude and for new evaluation methods to be realized such as the real-time spectrogram to characterize transient emissions. In this paper two novel systems for time-domain EMI measurements above 1 GHz are presented. The first system combines ultra-fast analog-to-digital-conversion and real-time digital signal processing on a field-programmable-gate-array (FPGA) with ultra-broadband multi-stage down-conversion to enable measurements in the range from 10 Hz to 26 GHz with high sensitivity and full-compliance with the requirements of CISPR 16-1-1. The required IF bandwidths were added to allow for measurements according to MIL-461F and DO-160F. The second system realizes a system of time-interleaved analog-to-digital converters (ADCs) and has an upper bandwidth limit of 4 GHz. With the implementation of an automatic mismatch calibration, the system fulfills CISPR 16-1-1 dynamic range requirements. Measurements of the radiated emissions of electronic consumer devices and household appliances like the non-stationary emissions of a microwave oven are presented. A measurement of a personal computer's conducted emissions on a power supply line according to DO-160F is given.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.81-88
• /
• 2003

CISPR has published the limits on the noises emitting from power lines and signal lines. But different measurement environment and measurement methods are used in every countries. This difference causes much confusion in understanding the results measured by different test laboratories. In this paper, we measure EMI noise using the absorbing clamp method that takes short measurement time and is described in CISPR 13, 14-1, 16-2. We analyze the cause of the difference of measurement results and propose the method for improving the uncertainty

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.336-339
• /
• 2002

CISPR(Committee Internationale Special des Perturbations Radio Electriques) has proposed limits on the noises emitting from power lines and signal lines. But different measurement environment and different measurement methods are used in different countries. This difference causes much confusion in understanding the results measured by different test laboratories. In this paper, we measure EMI noise using the absorbing clamp method that takes short measurement time and is described in CISPR 13, 14-1, 16-2. We analyze the cause of the difference of measurement results.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.343-343
• /
• 2001

최근 전자산업과 전파통신산업의 발달에 따라 불요전자파에 의한 전자파장해가 심각한 수 준에 이르게 되었다. 그 결과 국 . 내외 전자파환경은 나날이 악화되고 있으며, 이로 인한 사 회적 문제가 점차 증가되고 있는 실정이다. 이에 대한 대책으로 CISPR(Comite Internationale S Special des Perturbations Radioelectrique), FCC (Federal Communications Commissions) A ANSI(Amercian National Standards Institute) 둥이 주축이 되어 국제 규정이 제정되어 각종 전자기기들에 대해 방사(EMI) 및 내성(EMS)의 규제가 강화되고 있다. 그러나 국제규정이 요구하는(30 MHz - 18 GHz) 주파수 범위에서의 EMIjEMS 측정을 하기 위해 광대역(Broad-band) 전파무향실(Anechoic Chamber)이 필요하지만1 기존의 Ferrite T Tile 또는 그리드형 전파홉수체는 20 dB 이상 전파를 홉수할 수 잇는 주파수 대역이 30 M MHz - 400 MHz 또는 780 MHz에 불과하기 때문에 상기의 조건을 만족하는 전파무향실 을 구성하기에는 곤란한 실정이다. 본 논문에서는 국제 규격을 만족하는 전파무향실을 위한 광대역 전파홉수체를 개발하기 위해, 다충형으로 구성하고, 전파흡수체의 형상을 변화시켜 등가재료정수법을 사용하여 설계하고 그 특성을 평가함을 그 목적으로 하였다. 따라서 본 논문에서는 본 연구실에서 기폰에 제안한바 있는, 금속판 위에 타일형 페라이 트 충, 그 위에 원추절단형 페라이트 층과 원통형 페라이트 층을 적층시칸 형상의 전파홉수 체는 30 MHz - 6 GHz 정도까지 커버할 수 있으나, 1 GHz 부근의 주파수 대에서 16 dB 정도의 홉수능 밖에 가지지 못하였다. 이를 개선하기 위해, 금속판 위에 타일형 페라이트 층 을 형성하고 그 위에 원통형 페라이트 충, 원추절단형 페라이트 충I 원통형 페라이트 충, 타 원형 페라이트 충을 형성한 새로운 형태의 전파홉수체를 제안하였다. 본 논문에 제안한 새로운 형태의 전파흡수체의 시물레이션 결과 30 MHz - 20 GHz의 주파수 범위에서 전반적으로 25 dB이상의 전파흡수능을 가짐을 확인하였으며/ 특히 기폰에 제안한 전파홉수체와 비교하면,1GHz 부끈에서의 전파홉수능을 10 dB 이상 개선하였다. 나아가서/ 실재로 제작한 전파흡수체의 측정된 주파수특성이 시율레이션에 의한 이론치와 3 30 MHz - 6 GHz의 범위에서 잘 일치함을 확인하였다. 또한y 전파 홉수체의 전체 높이는 2 27 mm 밖에 되지 않으므로 본 연구에서 제안한 전파 홉수체를 사용할 경우 전파무향실의 유 효공간 확보에 매우 유리한 이점을 가진다