• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.91-96
• /
• 1987

Plasma etching can obtain less damaged etch surface than reactive ion etching. This study was performed to get anisotropic etching characteristics of Si using two step etching technique with C2CIF5 and SF6 gas mixture. The results show that the etch rate and aspect ratio of silicon was increased with increment of SF6 contents. The bulging phenomenon on trench side wall in the plasma one-step etching technique was eliminated by the two step etching technique. The anisotropy was decreased from 12(at 120m Torr) to 2.2(at 400m Torr) with increasing the chamber pressure. At the low rf power (350 watts) anisotrpy of silicon was obtained 7 lower than that of high rf power (650 watts. A:~9). In Summary we obtained anisotropic etching profiles of silicon with e 6\ulcornerm depth by using the plasma two-step etching technique.

• Korea Trade Review
• /
• v.47 no.2
• /
• pp.31-46
• /
• 2022

The purpose of this study is to measure the degree of discrepancies in the bilateral trade data between South Korea and its five major trade partners and to identify the key factors causing the discrepancies. By analyzing statistics based on the CIF/FOB ratio estimation and taking into consideration the trade flow via Hong Kong, the study finds that the discrepancies in South Korea's trade data with the US, Vietnam, and Japan are insignificant. In case of Hong Kong, however, the value of South Korea's import from Hong Kong is extensively inconsistent with Hong Kong's export to South Korea(i.e. the mirror data) while the value of South Korea's export to Hong Kong generally corresponds to its mirror data. Such discrepancies are caused by differences in recording re-exports, which are often found in the trade flow via entrepôt economics including Hong Kong. Meanwhile, discrepancies in reported bilateral trade flows between South Korea and People's Republic of China(PRC) remain relatively marginal. The discrepancy of statistics between South Korea as the exporter and PRC as the importer is mainly caused by the trade flow via Hong Kong. On the other hand, the discrepancy of statistics between South Korea as the importer and PRC as the exporter is assumably due to the differences in attribution of trade partners.

• The Korean Journal of Applied Statistics
• /
• v.31 no.4
• /
• pp.529-538
• /
• 2018

Tuberculosis causes high morbidity and mortality. However, Korea still has the highest tuberculosis (TB) incidence and mortality among OECD countries despite decreasing incidence and mortality due to the development of modern medicine. Korea has now implemented various policy projects to prevent and control tuberculosis. This study analyzes the effects of public-private mix (PPM) tuberculosis control program on treatment outcomes and identifies the factors that affecting the success of TB treatment. We analyzed 130,000 new tuberculosis patient cohort from 2012 to 2015 using data of tuberculosis patient reports managed by the Disease Control Headquarters. A cumulative incidence function (CIF) compared the cumulative treatment success rates for each factor. We compared the results of the analysis using two popular types of competition risk models (cause-specific Cox's proportional hazards model and subdistribution hazard model) that account for the main event of interest (treatment success) and competing events (death).

• Journal of Home Health Care Nursing
• /
• v.27 no.1
• /
• pp.29-41
• /
• 2020

Purpose: This study aimed to investigate the influence of post-traumatic stress on professional quality of life as mediated by cognitive emotion regulation among nurses working in small and medium hospitals who have experienced violence and to develop and test a structural equation model of that professional quality of life. Methods: Participants were 215 nurses who had experienced violence working in medium and small hospitals. They were surveyed using a structured questionnaire. Results: The final model was shown to have good fit with χ² (2.83), GFI (.90), TLI (.90), and CIF (.90). Therefore, the model was selected as the final model, supporting 7 of the 11 hypotheses. Post-traumatic stress, adaptive emotional regulation, and maladaptive emotional regulation had significant impacts on empathy satisfaction (professional quality of life subscale) and empathy fatigue (subscale of professional life quality) among nurses who had experienced violence, and the explanatory power of these variables was 28.7% and 38.6%, respectively. Conclusion: In the development of nursing intervention programs to improve the professional quality of life of nurses who have experienced violence, factors such as post-traumatic stress and cognitive emotion regulation (adaptive and maladaptive) should be considered as they were identified in this study as influencing the professional quality of life of such nurses in medium and small hospitals.

• Journal of Broadcast Engineering
• /
• v.16 no.6
• /
• pp.1018-1025
• /
• 2011

Scalable Video Coding (SVC) extension of H.264/AVC is a new video coding standard for media convergence by providing diverse videos of different spatial-temporal-quality layers with a single bitstream. Recently, real-time SVC codecs are being developed for the application areas of surveillance video and mobile video, etc. This paper presents the design and implementation of a H.264/SVC decoder based on an embedded DSP using Open SVC Decoder (OSD) which is a real-time software decoder designed for the PC environment. The implementation consists of porting C code of the OSD software from PC to DSP environment, profiling the complexity performance of OSD with further optimization, and integrating the optimized decoder into the TI Davinci EVM (Evaluation Module). 50 QCIF/CIF frames or 15 SD frames per second can be decoded with the implemented DSP-based SVC decoder.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.250-258
• /
• 2003

Recently, the transition from conventional analog broadcasting to digital broadcasting has been proceeding as a result of the advance in digital multimedia broadcasting technique. In radio broadcasting, Eureka-147 DAB(Digital Audio Broadcasting) was decided as the standard system of digital radio broadcasting in Korea. In addition to CD quality audio, a variety of data services and excellent performance in mobile reception can be served by DAB, and DAB was evolved into DMB(Digital Multimedia Broadcasting) in Korea for the purpose of emphasizing moving picture multimedia service by DAB. In case of digital broadcasting, it is absolutely essential to measure the BER(Bit Error Rate) in the received signal in order to evaluate the coverage obtained by a transmitter and the quality of the received signal. In this paper, we propose efficient subchannel data structure and BER measurement algorithm. and then verify it by laboratory experiments. With a proposed method, the synchronization for BER measurement is easily obtained and especially the exact results can be obtained by classifying the lost bits which are included in the reception-failed CIFs(Common Interleaved Frame) into errors. This makes the proposed BER measurement system especially appropriate to DMB in which the frequent changes in channel status caused by mobile reception environment exist.

• Journal of Information Technology Services
• /
• v.10 no.2
• /
• pp.177-188
• /
• 2011

This paper proposes a DEA model for the performance evaluation of each brand of coking coals in an integrated steel mill. The performance is defined as the efficiency which is the ratio of two linear combinations of the output factors to the input factors. There is only one input factor considered in the model : unit price of each brand based on CIF. Five output factors are chosen in consideration of their impact to the quality of cokes such as Ash, VM, LMF, TD, and Rm. Some of the output factors are treated as undesirable in DEA model because the quality criteria are given by the range. The CCR and BCC efficiencies are derived by the DEA model, and the scale efficiency is calculated, too. Each brand of coking coal is classified into four categories according to the CCR and BCC efficiencies, and the most inferior brands are identified as a result. The impact of the input and output factors to the efficiency is analyzed using a multiple regression, then the unit price is revealed as the most critical among them. Also, ANOVA results show that there exist efficiency differences among the coal types and the countries imported, respectively. Finally, the quantitative projection for the inefficient brands is performed if they are to be efficient. The result could be utilized in selecting the good or bad brands of coking coal based on the efficiency in an integrated steel mill. Also, this model will be used to assess the relative efficiency of a new brand of coking coal if it is a candidate to be imported.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.418-423
• /
• 2004

The motion estimation algorithm based block matching is a widely used in the international standards related to video compression, such as the MPEG series and H.26x series. Full search algorithm(FA) ones of this block matching algorithms is usually impractical because of the large number of computations required for large search region. Fast search algorithms and conventional binary block matching algorithms reduce computational complexity and data processing time but this algorithms have disadvantages that is less performance than full search algorithm. This paper presents new Boolean matching algorithm, called BCBM(Bit Converted Boolean Matching). Proposed algorithm has performance closed to the FA by Boolean only block matching that may be very efficiently implemented in hardware for real time video communication. Simulation results show that the PSNR of the proposed algorithm is about 0.08㏈ loss than FA but is about 0.96∼2.02㏈ gain than fast search algorithm and conventional Boolean matching algorithm.

• Korean Journal of Community Nutrition
• /
• v.1 no.3
• /
• pp.335-345
• /
• 1996

The solids(supplementary food) consumption of 200 healthy infants aged from 4 to 6 months have been measured. Five groups were assigned to different feeding patterns. Breastfed group(BF, n=38), formula-fed group(FF, n=102) and mixed-fed group(MF, n=14) were fed breast milk, formula and mixed(breast mile+formula) from birth until 6 months of age respectively. Convert 1 group(C1F, n=14) and convert 2 group(C2F, n=32) were fed breast milk and mixed milk at 2 months of age respectively and were switched to formula thereafter. All infants received solids form 4 months of age. The energy intake from solids at 4 and 6 months averaged 59.1 and 110.3㎉/d among BF groups vs 151.9 and 239.3㎉/d among FF groups respectively. Intakes of protein, calcium and iron were 38-46$\%$, 34-44% and 25-37$\%$ higher in the FF than in the Bf group during the first 6 months. However, no significant differences were found in the intakes of energy and nutrient intakes from solids in all 4 groups excluding BF group(39$\%$). Although BF infant's nutrient intakes from solids were lower than other group's intakes, they intaked evenly solids from various food groups. As the age of infant had increased, the energy intake ratio from solids was cereals and dairy products was increased whereas energy intake ratio from meats, eggs, fruits and vegetables was decreased. TSC4, TSC6(the frequency score for the kinds of weaning food taken) showed no significant difference among 5 feeding groups but CIF-and C2F group's scores tended to be high. Consequently, these results suggest that BF group's solid intake pattern is more desirable and that Korean lactating Mother's dependence on commercial weaning food is too high.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.151-192
• /
• 2000

This study has been focused on the revisions and characteristics of the 7 non-maritime trade terms(EXW, FCA, CPT, CIP, DAF, DDU and DDP) in Incoterms 2000. Main characteristics are as follows: First, the use of different expressions intended to convey the same meaning has been avoided and the same expressions as appear CISG have been used. Second, the content of preamble in each trade terms has been shortened and definitedly. Third, if the parties are going to use variants of trade terms in Incotrems 2000, the meanings should be made clear by adding explicit wording in the contract of sale. Main revisions of the 7 trade terms are as belows: First, Incoterms 2000 has emphasized that in EXW, the seller delivers when he places the goods at the disposal of the buyer at the seller's premises or another named place(i.e. works, factory, warehouse, etc.) not cleared for export and not loaded on any collecting vehicle. Second, in FCA, delivery is completed; a) If delivery occurs at the seller's premises, the seller is responsible for loading. b) If delivery occurs at any other place, the seller is not responsible for unloading. Third, in CPT and CIP, all costs and charges relating to the goods whilst in transit until their arrival at the agreed place of destination, unloading costs and all duties, taxes and other charges as well as the costs of carrying out customs formalities payable upon import of the goods and for their transit through any country are linked with the content under the contract of carriage. Fourth, Incoterms 2000 has emphasized that in DAF, the seller delivers when the goods are placed at the disposal of the buyer on the arriving means of transport not unloaded, cleared for export, but not cleared for import at the named point and place at the frontier, but before the customs border of the adjoining country. Fifth, Incoterms 2000 has emphasized that in DDU, the seller delivers the goods to the buyer, not cleared for import(in DDP, cleared for import), and not unloaded from any arriving means of transport at the named place of destination. Sixth, if the parties do not intend to deliver the goods across the ship's rail, FCA, CPT and CIP instead of FOB, CFR and CIF should be used.