• The Research Journal of the Costume Culture
• /
• v.23 no.5
• /
• pp.768-777
• /
• 2015

In this study, the dyeing of silk fabric with Polygonum cuspidatum extracts was investigated. The contents of this study are as follows. First, the proper dyeing conditions were investigated by measuring the dye uptake (K/S value) that depended on the dyeing conditions when silk fabric was dyed with Polygonum cuspidatum extract. Second, the brightness (L), hue, and chroma differences that appear after mordanting with Al, Cu and Fe were investigated by measuring the CIELAB and Munsell values. And third, the colorfastness and antibacterial property were measured. When the silk fabric was dyed with Polygonum cuspidatum extract, the proper dyeing conditions were a colorant concentration of 90% v/v, a dyeing of time 100 minutes, a dyeing temperature of $70^{\circ}C$, and a dyeing of pH 3. In mordanting methods, the dyeabilities of post-mordanting were higher than those of premordanting. The hue value displayed yellow (Y) and yellow-red (YR) in cases of pre and post mordanting. The C value decreased by the mordanting of Polygonum cuspidatum extracts. Generally the colorfastness of mordanted fabrics was improved by mordanting. The dyed fabrics showed a 90.6% of Staphylococcus aureus reduction rate, and the dyed and mordanted fabrics showed 97.1% bacteria reduction rate. The dyed and mordanted fabrics showed above 90.5% Klebsiella pneumoniae reduction rate, and Cu mordant revealed the most effective bacterial reduction.

• Journal of the Korean Ceramic Society
• /
• v.55 no.2
• /
• pp.116-125
• /
• 2018

Color shade variation was investigated in zirconia dental blocks, prepared using commercial powders. As a reference color-shade block we used the color indexes of A2, A3.5, A4 and B3, according to the VITA classical color scale. The zirconia powders for color shade blocks showed colors of white, yellow, pink and grey, respectively, after firing at $1530^{\circ}C$. The zirconia powders were mixed according to the recipe of color shade blocks and shaped at lower pressure using a uniaxial hydrostatic press. The shaped sample was inserted into a vinyl pack and sealed in a vacuum form machine. The shaped block samples were reshaped at 450 bar using an isostatic cold press and fired at $1530^{\circ}C$ for three hours. In order to investigate the atmospheric color variation with firing temperature, the A2, A3.5, A4 and B3 sintered blocks were fired between $700^{\circ}C$ and $1300^{\circ}C$ under controlled atmosphere of $pN_2$ and $pO_2$. The surface color picture was taken using a smart phone camera and compared with the results obtained using the VITA classical color scale. Quantitative color index value, CIELAB, was measured using a color-meter. Above $800^{\circ}C$, the color darkness greatly increased with the increase of the reduction temperature and keeping time.

• Journal of the Korean Ceramic Society
• /
• v.51 no.3
• /
• pp.150-155
• /
• 2014

In aprevious study, the mutual interaction between $Fe_2O_3$ and $TiO_2$ was found to influence the color of celadon glaze. Celadon samples were prepared with varying concentrations of $TiO_2$ at a fixed level of $Fe_2O_3$. The electronic states of Fe and Ti were analyzed by M$\ddot{o}$ssbauer spectroscopy and electron spin-resonance spectroscopy, respectively. These results were examined with the celadon colors measured according to CIELAB values. This study revealed that an increase of $Ti^{3+}$ in the glassy phase decreased the $Fe^{2+}/Fe^{3+}$ ratio, resulting in a color change of the celadon samples in the GY and Y groups. The maximum reflectance wavelength was shifted from 505 nm to 610 nm with an increase in the $TiO_2$ concentration.

• IE interfaces
• /
• v.19 no.3
• /
• pp.174-180
• /
• 2006

This paper deals with the robot system of recognizing human's expression from a detected human's face and then showing human's emotion. A face detection method is as follows. First, change RGB color space to CIElab color space. Second, extract skin candidate territory. Third, detect a face through facial geometrical interrelation by face filter. Then, the position of eyes, a nose and a mouth which are used as the preliminary data of expression, he uses eyebrows, eyes and a mouth. In this paper, the change of eyebrows and are sent to a robot through serial communication. Then the robot operates a motor that is installed and shows human's expression. Experimental results on 10 Persons show 78.15% accuracy.

• Journal of Fashion Business
• /
• v.23 no.6
• /
• pp.27-36
• /
• 2019

This study aimed to analyze the color differences by warp direction of textile mosaics by focusing on two representative textile wallcovering types, woven and string. Mosaics made of string can be expressed as having three-dimensionality based on color differences resulting from the warp direction of the string. String wallcoverings, unlike woven or non-woven wallcoverings, only have vertically oriented warp lamination on the backing paper without weft, and therefore, the reflection and backing color can be expressed differently depending on the angle of the mosaic. In this study, two identical wallcoverings were manufactured using the same materials but using different textile types, woven and string. The wallcoverings underwent die-cutting by each angle and were deployed in cube form. The analysis was based on ISO 5631-1:2015. The color difference between the two wallcoverings, woven and string, was shown as ΔE* 9.29. Based on the standard deviation of the color difference for each mosaic angle, woven ranged from ΔE* 0.09 to 0.94 and string ranged from ΔE* 1.92 to 3.74, showing a larger color difference. Thus, using the color differences of string to create a mosaic wallcovering improved dimensionality.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.670-672
• /
• 2005

본 논문은 비전을 기반으로 한 감정인식 로봇에 관한 논문이다. 피부스킨칼라와 얼굴의 기하학적 정보를 이용한 얼굴검출과 감정인식 알고리즘을 제안하고, 개발한 로봇 시스템을 설명한다. 얼굴 검출은 RGB 칼라 공간을 CIElab칼라 공간으로 변환하여, 피부스킨 후보영역을 추출하고, Face Filter로 얼굴의 기하학적 상관관계를 통하여 얼굴을 검출한다. 기하학적인 특징을 이용하여 눈, 코, 입의 위치를 판별하여 표정 인식의 기본 데이터로 활용한다. 눈썹과 입의 영역에 감정 인식 윈도우를 적용하여, 윈도우 내에서의 픽셀값의 변화와 크기의 변화로 감정인식의 특징 칼을 추출한다. 추출된 값은 실험에 의해서 미리 구해진 샘플과 비교를 통해 강정을 표현하고, 표현된 감정은 Serial Communication을 통하여 로봇에 전달되고, 감정 데이터를 받은 얼굴에 장착되어 있는 모터를 통해 표정을 표현한다.

• Science of Emotion and Sensibility
• /
• v.15 no.3
• /
• pp.381-388
• /
• 2012

The purpose of this study is to check if LED lighting can be used as general lighting and examine the color rendering property of full color RGB LED lighting. CRI is one of the important properties of evaluating lighting. However the present CRI does not fully evaluate LED lightings. Firstly, the performance of a simple task was compared other than comparing CRI values for different lighting. For experimental preparation three types of lightings were used; standard D65 fluorescent tube, general household fluorescent tube, and RGB LED lighting. All three lightings show high error for Purple-Red. All three lightings show similar error for all hues and prove that color discrimination is not affected by the lighting. This proves that LED could be used as general lighting. Secondly, problems of the conventional CIE CRI method are considered and new models are suggested for the new lighting source. Each of the models was evaluated with visual experiment results obtained by the white light matching experiment. The suggested model is based on the CIE CRI method but replaces the color space model by CIELAB, color difference model by CIEDE2000, and chromatic adaptation model by CAT02.

• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.19-27
• /
• 2004

The dyeing on cellulose fibers such as cotton and viscose viscose rayon was carried out by the use of solution extracted from natural fresh leaves of indigo plant under several dyeing conditions. The dyeing affinity of viscose rayon was higher than that of cotton. The total K/S value of dyed fabrics was considerably increased with repeated dyeings, while a dyeing time has a little influence on it. Both fibers were hardly dyed by indigo at $60^{\circ)$ and cotton was dyed better at $40^{\circ)$ than at $20^{\circ)$, but in viscose rayon, a little difference of total K/S was shown between $20^{\circ)$ and $40^{\circ)$. The color change of dyed fabric according to dyeing conditions was evaluated by the CIELAB color system. viscose rayon had a lower $b^*$ so that it looked bluer than cotton and when the celluose fibers were dyed by indigo plant at the lower temperature, the bluer it looked. By repeated dyeings the $b^*$value of dyed fabrics was much increased but the $a^*$ value was little influenced and in case of viscose rayon the change was considerable.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.419-421
• /
• 2009

The freezing point would be different as the atmospheric pressure and humidity change. So if we can measure the transparency of ice, it should be easy that we approximate a freezing process and estimate the density of ice. This paper presents the method for estimating the transparency of ice in images. First, ice images are mapped to the $CIEL^*a^*b^*$ color space, and we make a new index for the ice transparency by using the average of $L^*$ and RMS(Root Mean Square) Contrast. In this case, the new index is better than the other existing method, i.e, Weber contrast, and Michelson contrast.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.3
• /
• pp.226-233
• /
• 2021

This article aimed at thermally treating and charactering the Eucalyptus grandis wood under three different temperatures. For this, pristine eucalypt samples were treated by heating in a laboratory oven at 160 ℃, 200 ℃ and 240 ℃, always for 2 h. Treatment parameters (based on weight percentage loss and specific gravity), as well as mechanical (by hardness tests), chemical (by infrared spectroscopy), thermal (by thermogravimetry), and colorimetric (by CIELab method) features were evaluated. Compared to the pristine ones, the treated woods have there was a drop in apparent density at 12 % and consecutively greater thermal stability which is probably related to a previous partial degradation of some major amorphous components (namely cellulose, hemicellulose and lignin), as suggested by the treatment parameters and infrared spectra. Besides of that, the higher the temperature treatment, the higher the loss in surface hardness and the higher the colour darkening.