• 제목/요약/키워드: CIE $L^*a^*b^*$

검색결과 363건 처리시간 0.031초

홍화 황색소를 이용한 모염색의 최적화 (Optimization of Wool Dyeing with Yellow Dye from Carthamus Tinctorius L.)

  • 신윤숙;손경희;류동일
    • 한국의류학회지
    • /
    • 제33권12호
    • /
    • pp.1971-1978
    • /
    • 2009
  • 본 연구는 염색 공정의 표준화와 재현성을 확립하기 위해 홍화 황색소의 모섬유에 대한 염색성을 조사하는데 목적이 있다. 홍화 황색소는 물로 추출한 후 농축, 동결건조하여 분말상태로 만들어 사용하였다. 염색 온도 및 시간, 염료 농도, 염액의 pH 등에 따른 염착성과 색상 변화에 대해 조사하였으며, 세탁 및 일광견뢰도를 평가하였다. 염착량은 $50^{\circ}C$까지 서서히 증가하다가 이후 급격히 증가하여 $90^{\circ}C$에서 최고 값을 나타냈다. 염착은 초기 10분 이내에 빠르게 일어났으며 이후 서서히 증가하다가 40~60분 사이에 평형에 도달하였다. 염료 농도가 증가함에 따라 염착량이 계속 증가하여 점점 진하고 어두운 노랑색이 되었다. 산성 조건에서 염착이 잘 되었으며 pH 3.0에서 최대염착량을 보였다. 얻은 결과를 근거로 최적 염색 조건은 $90^{\circ}C$, 40분, pH 3.5으로 설정하였으며, 최적 조건에서 염색한 시료들 간의 색차는 0.53~1.75로서 재현성이 우수하였다. 후매염은 염착성 증진에 효과가 없었으나, 다양한 톤과 농담의 노랑색을 얻을 수 있었다. 세탁(드라이크리닝)견뢰도는 4/5등급으로 좋은 편이었으나 20시간 조사 후 일광견뢰도는 Fe과 Cu매염한 경우 3/4등급으로 색차가 가장 적었다. 결과를 종합해 볼 때 매염제가 색상톤을 다양하게 하는 효과는 있었지만, 염착량과 견뢰도 향상에 기여하지 못하였다. 홍화 황색소는 모염색에서 매염제 없이 만족스러운 결과를 얻을 수 있고, 따라서 환경에 피해를 주지 않을 것으로 사료된다.

열풍 건조 토마토 분말 첨가가 돈육 패티의 냉장저장 중 품질특성에 미치는 영향 (Effect of Hot-Air Dried Tomato Powder on the Quality Properties of Pork Patties during Cold Storage)

  • 김일석;진상근;남상해;남영욱;양미라;민훈식;김동훈
    • Journal of Animal Science and Technology
    • /
    • 제50권2호
    • /
    • pp.255-264
    • /
    • 2008
  • 미트패티에 무첨가구와 열풍 건조 토마토 분말을 각각 0.00(C), 0.25(T1), 0.50(T2), 0.75(T3) 및 1.00%(T4)씩 첨가하여 제품을 제조한 후 5℃에서 7일간 저장하면서 물리화학적 및 관능적 품질특성을 조사하였다. 건조 토마토 분말은 열풍건조기에서 80℃에서 2시간 동안 열처리 후 60℃에서 48시간 동안 재처리한 것이다. pH는 T4가 대조구와 다른 처리구에 비해 저장 초기에 유의적으로 낮았다가 저장말기에 유의적으로 가장 높게 나타났다(p<0.05). 가열감량은 대조구와 처리구간 유의적인 차이는 없었다(p>0.05). TBARS는 저장 전 기간 동안 첨가구가 대조구에 비해 유의적으로 낮은 값을 보였다(p<0.05). VBN은 T2가 유의적으로 증가하였으나(p<0.05), 대조구와 나머지 처리구에서 유의적인 차이가 없었다(p>0.05). 육색(CIE L*a*b*)은 첨가구가 대조구보다 높은 경향을 보였으며, T4의 a*와 b*값이 다른 제품들보다 유의적으로 가장 높게 나타났다(p<0.05). 저장기간이 경과함에 따라 총균수는 유의적으로 증가하였으며(p<0.05), 저장 7일차에 5.48(T2)~ 6.98(C) log CFU/g 범위 이었다. 관능검사 결과 열풍 건조 토마토 분말을 첨가한 처리구들의 제품이 대조구에 비해 다소 양호한 평가를 받았다.

한우고기 및 호주산 Wagyu 쇠고기 채끝육의 이화학특성과 관능특성 (Comparison of Chemical, Physical and Sensory Traits of Longissimus Lumborum Hanwoo Beef and Australian Wagyu Beef)

  • 이종문;김태우;김진형;조수현;성필남;정명옥;조용민;박범영;김동훈
    • 한국축산식품학회지
    • /
    • 제29권1호
    • /
    • pp.91-98
    • /
    • 2009
  • 한우고기 채끝부위 $1^{++}$등급의 조지방 함량이 26.58%로 가장 높았으며 호주산 쇠고기의 조지방 함량은 11.87%로 한우고기 1등급과 비슷한 수준으로 분석되었다. 한우고기 $1^{++}$등급과 $1^+$등급 및 1등급의 조지방 함량은 각각 26.58%, 16.39%, 11.29% 로서 육질등급 간에 차이가 크게 나타났다. 보수력은 한우고기 $1^{++}$등급이 60.05%로 가장 높았다. 전단력은 호주산 쇠고기가 2.81 kg로 가장 낮아 호주산 쇠고기의 연도증진 효과가 있는 것으로 분석되었으며 관능 검사 요원이 평가한 맛은 전체평점에서 한우고기($1^{++}$등 급, $1^+$등급, 1등급)가 호주산 쇠고기 보다 우수하였다. 한우고기 육질등급 간 관능평가 결과 $1^{++}$등급은 가장 우수 하였으나(p<0.05) $1^+$등급과 1등급간에는 차이가 없었다. 이상의 결과에서 호주산 Wagyu 쇠고기는 한우1등급 및 $1^+$등급 쇠고기와 비교할 때 향미는 다소 나쁘지만 전체적인 관능검사 평점은 비슷하였다.

금속염화물 착색제 침투가 정방정 지르코니아 다결정체의 색조와 강도 변화에 미치는 영향 (Effect of Metal Chloride Coloring Liquids on Color and Strength Changes of Tetragonal Zirconia Polycrystals)

  • 오종진;노형록
    • 치위생과학회지
    • /
    • 제15권5호
    • /
    • pp.577-584
    • /
    • 2015
  • 본 연구에서는 $1,040^{\circ}C$에서 예비소결한 Y-TZP 시편을 크롬 염화물 0.03~0.08 wt%, 테르븀 염화물 0.03~0.07wt%를 함유한 금속염화물 수용액에 3분간 침지하고서 $1,450^{\circ}C$에서 2시간 동안 소결하였으며, 이를 금속염화물 침투가 Y-TZP 소결체의 색상, 소결밀도, 굴곡강도 및 미세조직의 변화에 미치는 영향을 조사한 결과, 다음과 같은 결론을 얻었다. 지르코니아 예비소결체에 대한 크롬과 테르븀 염화물 침투로 A1, A2 및 A3에 근사한 색조의 재현이 가능하였다. 크롬과 테르븀 염화물을 첨가했을 때 지르코니아의 결정립 크기가 증가하였다. Y-TZP 소결체의 2축 굴곡강도는 크롬과 테르븀 염화물 침투에 의해서 유의한 변화를 보이지 않았다(p>0.05). X-선 회절 분석결과, 크롬과 테르븀 염화물의 첨가 여부와 함량에 따른 지르코니아 결정상의 차이점은 관찰되지 않았다. 이상의 결과로 크롬과 테르븀 염화물을 사용하여 지르코니아의 색상을 조절할 수 있음을 확인하였고, 착색된 지르코니아의 색상은 Vita shade guide의 색상과 다소 차이가 있었지만 임상에서 이중구조 세라믹 보철물 재작 시 사용 가능할 것으로 생각된다.

비육돈의 교배조합이 부분육 생산수율 및 육질에 미치는 영향 (Effects of the Mating System on Retail Cut Yield and Meat Quality in Commercial Pigs)

  • 김효선;양한술;이정일;주선태;전진태;이정규
    • Journal of Animal Science and Technology
    • /
    • 제49권3호
    • /
    • pp.379-386
    • /
    • 2007
  • 비육돈 생산에 있어 교배조합이 부분육수율과 육질에 미치는 영향에 대해 알아보고자 (주)가야육종의 계통돈을 이용하여 생산된 York- shireLandrace (F1) 모돈에 종료웅돈으로 (주)가야육종이 보유하고 있는 계통돈인 Duroc종(YLD), 경남첨단양돈연구소의 5세대까지 계통돈으로 조성한 American Berkshire 종(YLB), American Berkshire (♀) 종에 (주)가야육종의 Duroc (♂)을 교배하여 생산 및 선발한 BD (F1)을 이용하였다. 부분육의 경우 YLD 및 BD이 YLB에 비해 높은 삼겹살, 목심 수율을 나타내었고, 전체 정육의 수율도 높았다(P<0.05). 육질 측정 결과, 조단백 및 회분은 교배조합별 차이를 보이지 않으나, 등심과 목심의 수분 함량 결과 YLB와 YLD에 비해 BD에서 낮은 값을 나타내었다(P<0.05). 조지방 함량은 목심에서 YLB와 YLD에 비해 BD에서 높게 나타났다(P<0.05). pH의 경우 YLB, YLD에 비해 BD에서 높은 값을 보이며, 가열감량 및 육색 측정 결과 BD에서 낮은 가열감량 및 명도(L*)값을 보였다(P<0.05). 지방산 분석 결과, 등심의 경우 BD가 유의적으로 높은 myristic acid 및 oleic acid값을 나타냈으며, stearic acid는 BD에 비해 YLB와 YLD가 유의적으로 높은 값을 나타내었다(P< 0.05). 그 결과 YLD와 YLB에 비해 BD 품종에서 불포화지방산 함량이 높게 나타났다. 목심의 경우 YLD와 YLB에 비해 BD 품종에서 낮은 palmitic acid 및 linonenic acid 값을 나타내었다. 또한 삼겹살의 경우 BD 품종에서 myristic acid 및 palmitic acid는 높게 나타났으며, palmitoleic acid 및 stearic acid는 낮은 값을 나타내었다(P<0.05). 관능평가 결과에서도 YLD와 YLB 품종에 비해 BD에서 육즙삼출, 마블링 및 전체적인 기호도에 있어서 높은 점수를 획득하였다.

레진 강화형 글라스아이오노머의 색 안정성에 관한 연구 (A STUDY ON THE COLOR STABILITY OF RESIN MODIFIED GLASS IONOMERS)

  • 구대회;이용근;손호현;임미겸
    • Restorative Dentistry and Endodontics
    • /
    • 제22권1호
    • /
    • pp.358-373
    • /
    • 1997
  • Resin modified glass ionomers were introduced in 1988 to overcome the problems of moisture sensitivity and low early mechanical strength of conventional glass ionomers and to maintain their clinical advantages. The purpose of this study was to evaluate the color stability of four resin modified glass ionomers(Fuji II LC, Vitremer, Dyract and VariGlass), one resin composite material(Z-100), and one conventional glass ionomer(GC Fuji II) under several conditions. These conditions were as follows: 1) before curing, 2) after curing, 3) after polishing, 4) after 500 thermocycling, 5) after 1,000 thermocycling, 6) after 1,500 thermocycling and 7) after 2,000 thermocycling. Three specimens of each material/shade combination were made. Materials were condensed into metal mold with a diameter of 10 mm and a thickness of 2.0 mm, and were pressed between glass plates. The material was polymerized using a light polymerizing unit(Visilux II, 3M, USA). After removal of excess, the surface was polished sequentially on wet sandpapers. A reflection spectrophotometer(Model TC-6FX, Tokyo Denshoku Co., Japan) was used to determine CIELAB coordinates($L^*,a^*$ and $b^*$) of each specimen. CIE standard illumination C was used as the light source. The results were as follows : 1. In comparing different shades of same material, CIELAB color difference(${\Delta}E^*$) value was not significantly different from each other(p>0.05). 2. CIELAB color difference(${\Delta}E^*$) values between after-curing and after-polishing were ranged from 5.53 to 27.08. These values were higher than those of other condition combinations. 3. CIELAB color difference(${\Delta}E^*$) values between before-thermocycling and after-thermocycling were ranged from 1.40 to 7.81. Despite the number of thermocycling increased, CIELAB color difference(${\Delta}E^*$) value was low. 4. The color stability of resin modified glass ionomers was more stable than that of conventional glass ionomers but less stable than that of Z100.

  • PDF

The Improvement of the Opacity and Printing Strength of Fancy Paper Overlaid Plywood

  • Kuo Lan-Sheng;Perng Yuan-Shing;Wang Eugene I-Chen;Yen Chen-Fa;Kao Tsuen-Han
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
    • /
    • pp.91-98
    • /
    • 2006
  • The purpose of this study is to investigate the opacity and printing strength of MG paper overlaid plywood. The printing strength of ink on MG paper can be evaluated effectively by a formula $E^{*2}=[(L^{*})^{2}+(a^{*})^{2}+(b^{*})^{2}]^{1/2}$ that we proposed. Higher E value indicates good printing strength of ink-on-paper. We also assess the real color of translucent printed MG paper with a formula CIE ${\bigtriangleup}E^{*}$ (color difference between a pile of same paper to be opaque and fancy paper laminated board). In addition, the color difference on paper surface caused by the color of wood-based board (bottom) can be evaluated by a formula of Pc. No. Generally, an acceptable appearance quality of fancy boards is ${\bigtriangleup}E^{*}$ <2.0 and small Pc.No. value. The experimental results showed that Japan-made MG papers -J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for $??g/m^{2}$ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can't be shown through for the high-opacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufscture of various handsheets ($30g/m^{2}$) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable ${\bigtriangleup}E^{*}$ <2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.

  • PDF

착체중합법을 이용한 (Co,Mg)Al2O4 및 (Ni,Mg)Al2O4 청색 나노 무기안료 합성 (Synthesis of (Co,Mg)Al2O4 and (Ni,Mg)Al2O4 Blue Ceramic Nano Pigment by Polymerized Complex Method)

  • 손보람;윤대호;김진호;한규성;조우석;황광택
    • 한국세라믹학회지
    • /
    • 제50권6호
    • /
    • pp.510-517
    • /
    • 2013
  • In this study, the properties of blue inorganic nano-pigments with a spinel structure were systematically investigated. We report the preparation of a blue ceramic nano-pigment and the Co and Ni substitutional effects on the blue color. $MgAl_2O_4$ was selected as the crystalline host network for the synthesis of cobalt and nickel-based blue ceramic nano-pigments. Various compositions of $Co_xMg_{1-x}Al_2O_4$ and $Ni_xMg_{1-x}Al_2O_4$ ($0{\leq}x{\leq}1$) powders were prepared using apolymerized complex method. The obtained powder was preheated at $400^{\circ}C$ for 5 h and then calcined at $1000^{\circ}C$ for 5 h. XRD patterns of the (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ samples showed a single phase of the spinel structure in all compositions. TEM results indicated nano-sized pigments for (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ with a particle size ranging from 20 to 50 nm. The characteristics of the color tones of (Co,Mg)$Al_2O_4$ and (Ni,Mg)$Al_2O_4$ were analyzed by CIE $L^*a^*b^*$ measurements. In addition, the thermal stability and the binding characteristics of (Co,Mg)$Al_2O_4$, (Ni,Mg)$Al_2O_4$ are discussed in terms of the TG-DSC and FT-IR results, respectively.

Comparison of Drying Yield, Meat Quality, Oxidation Stability and Sensory Properties of Bone-in Shell Loin Cut by Different Dry-aging Conditions

  • Cho, Soohyun;Kang, Sun-Moon;Kim, Yun-Seok;Kim, Young-Chun;Ba, Hoa Van;Seo, Hyun-Woo;Lee, Eun-Mi;Seong, Pil-Nam;Kim, Jin-Hyoung
    • 한국축산식품학회지
    • /
    • 제38권6호
    • /
    • pp.1131-1143
    • /
    • 2018
  • This study aimed to investigate the drying yield, meat quality, oxidation stability and sensory properties of Hanwoo beef loin subjected to different dry-aging conditions. A total of 54 Hanwoo beef loins (bone-in, $6^{th}-13^{th}$ ribs) with fat cover at 2 d postmortem were assigned to four groups and hung in a dry-aging room at a controlled temperature ($2^{\circ}C-4^{\circ}C$), humidity (65%-85%) and air velocity (3 m/s). Four treatment conditions were tested; the respective temperature, humidity and treatment duration are as follows: T1, $2^{\circ}C$, 85%, 60 d; T2, $2^{\circ}C$, 65%, $20d+2^{\circ}C$, 75%, $20d+4^{\circ}C$, 85%, 20 d; T3, $2^{\circ}C$, 75%, $20d+4^{\circ}C$, 85%, 40 d; T4, $4^{\circ}C$, 85%, 60 d. The drying yield, total aerobic counts and fat contents increased, whereas the moisture content, meat color (CIE $L^*$, $a^*$, and $b^*$), and Warner-Bratzler shear force values decreased significantly during the aging period for all treatments (p<0.05). The cooking loss (%) did not change significantly until 40 d, and it was significantly higher in T1 and T4 than in T2 and T3 at 60 d (p<0.05). The water-holding capacity, pH and lipid oxidation [thiobarbituric acid reactive substance (TBARS) values] increased during aging (p<0.05). The sensory scores for tenderness, juiciness, flavor, and overall acceptability of dry-aged loin muscles increased as the aging period increased. T2 and T3 had significantly higher sensory scores and T1 had significantly lower scores for tenderness, juiciness, flavor, and overall acceptability at 20, 40, and 60 d for loin muscles (p<0.05).

천연염색직물의 물리적 색채 특성과 심리적 감성 요인 (Physical Colorimetric Properties and Psychological Sensibility Factor of Naturally Dyed Fabrics)

  • 이유진;이경현;조길수
    • 감성과학
    • /
    • 제19권3호
    • /
    • pp.3-14
    • /
    • 2016
  • 본 연구에서는 천연염료와 직물종류, 매염유무의 세 가지 조건에 대한 천연염색직물의 물리적 색채 특성을 측정하고, 심리적 색채감성평가를 실시하였다. 이에 대하여 염료의 종류, 직물의 종류, 매염제의 유무에 따른 물리적 색채 특성 차이를 살펴보기 위하여 분산분석을 실시하였으며, 상관관계분석을 통해 물리적 색채 특성과 심리적 감성간의 관계를 분석하고, 회귀분석을 이용해 천연염색에 대한 예측식을 도출하였다. 최종적으로, 천연염색직물에 대한 감성 이미지 맵을 제안하기 위하여 다차원 척도법(Multidimensional Scaling: MDS)을 이용하였다. 이를 통해, 대표적으로 남성적인(masculine)인 이미지에는 무거운, 딱딱한 색채감성을 갖는 치자염색이, 여성스러운(feminine) 이미지에는 밝고 투명하고 부드러우면서 가벼운 색채감성을 갖는 소목과 락, 치자청을 사용한 염색이 적합하다. 내츄럴(natural)한 이미지를 나타내기 위해서는 은은한 색채감성의 쑥 염색이 적절하고, 화려한 색채감성의 쪽으로 염색을 한다면 액티브(active)한 이미지를 가질 수 있을 것이라 예측 가능하다.