• 제목/요약/키워드: CHEMICAL FACTORY

검색결과 142건 처리시간 0.028초

무역네트워크 분석을 통한 한국 화장품 산업의 국제적 위상에 관한 연구 - 한중 FTA 사례를 중심으로 - (Research about Global Positioning of Korean Cosmetic Industry through Trade Network analysis : Focusing on the China-Korea FTA)

  • 김용진;김영진;이덕희
    • 무역학회지
    • /
    • 제41권5호
    • /
    • pp.63-87
    • /
    • 2016
  • 최근 노동비용 상승 등에도 불구하고 세계 최고수준의 외국인 직접투자 및 대다수 글로벌 기업의 현지법인 진출 등으로 중국은 여전히 세계의 공장으로서 역할을 수행하고 있다. 또한 글로벌 기업의 중국현지 공장에서 생산하는 제품에 대해서는 원산지규정에 충족할 경우 2015년 발효된 한중 FTA 혜택을 누릴 수 있다. 이러한 이유로, 대표적인 한중 FTA 수혜산업인 화학산업을 한국과 중국의 관점이 아닌, 글로벌 관점에서 분석할 경우 우리나라 화학산업에 부정적인 결과를 초래할 수 있음을 화장품 기타제품을 사례로 분석해보았다. 분석결과 한국은 해당 제품군에서 중심국가에 위치하지 못하고 주변국에 속하여, 중국내 기초화장품 및 메이크업 등의 공장을 보유하고 있는 다국적 기업에 의한 한국 수출이 증가할 가능성이 있음을 확인하였다. 마지막으로 한중 FTA를 헤쳐 나가기 위한 화학산업계의 정책적 대안으로 첫째, 중국시장으로 직접진출을 꺼려하는 글로벌 화학기업들의 적극적 유치와 둘째, 향후 성장성이 높은 화학제품군에 대한 지속적인 투자를 제시하였다.

  • PDF

Determination of Parathion Metabolite, p-Nitrophenol in Urine of Parathion Factory Workers

  • Han, Don-Hee;Jung, Dong-Gyun;Shin, Ho-Sang
    • Bulletin of the Korean Chemical Society
    • /
    • 제29권5호
    • /
    • pp.985-987
    • /
    • 2008
  • Parathion is an organophosphate pesticide being legally applied for the purpose of agriculture and is being manufactured in Korea. A gas chromatography/mass spectrometric method was developed for the determination of parathion urinary metabolite, p-nitrophenol. p-Nitrophenol was extracted from weak acidic urine, and then measured by gas chromatography-mass spectrometry (selected ion monitoring). The recovery of pnitrophenol in the overall procedure was 88.2%. The detection limit of the assay was 1.0 $\mu$ g/L based upon assayed urine of 2.0 mL. The method was applied to the determination of p-nitrophenol in urine of workers of a parathion industry. Spot urines of workers of a parathion industry were sampled at the end of shift and pnitrophenol was analyzed using above developed method. p-Nitrophenol could be detected in all of the urine samples at concentrations varying from 3.0 to 681 $\mu$ g/L.

제과공장 폐수의 화학적 응집공정 최적화 (Optimization of Chemical Coagulation for Wastewater Treatment in a Confectionery Factory)

  • 금승해;장규섭;송경빈;안길환
    • 한국식품과학회지
    • /
    • 제27권3호
    • /
    • pp.318-323
    • /
    • 1995
  • 제과회사 폐수처리의 화학적 응집공정을 최적화하기 위하여 이 연구를 수행하였다. 미처리 폐수의 $COD_{Mn}$과 총 고형분은 각각 $200{\sim}820ppm$$860{\sim}1360ppm$이었다. 폐수의 총 고형물의 성분은 당 40%, 단백질 10%, hexane-soluble 20%, 회분 30%였다. 650 nm에서의 turbidity와 suspended solid(SS)간에는 상관관계가 있었으므로, turbidity는 폐수의 on-line 측정도구로 사용할 수 있었다. 여러 응집제 중에서 $COD_{Mn}$과 SS 제거에 가장 효과적인 것은 $Al_2(SO_4)_3:Ca(OH)_2$의 조합 사용이었다. 최적의 $Al_2(SO_4)_3:Ca(OH)_2$ 농도는 480 ppm : 200 ppm이었다. 최적의 폐수처리 시간은$(Al_2(SO_4)_3$ 첨가 : $Ca(OH)_2$ 첨가 : 응집 숙성) 2 : 2 : 10분이었다. 이러 번의 $Al_2(SO_4)_3:Ca(OH)_2$ 처리공정은 gelatin과 계면활성제의 응집저해 현상을 극복할 수 있었으며, 미생물 슬러지의 첨가는 이 응집저해 물질들 제거에 도움이 되었다.

  • PDF

Cadmium and Zinc Uptake Characteristics of Corn Plant in Arable Soil Contaminated by Smelting Factory Source

  • Hong, Chang-Oh;Gutierrez, Jessie;Oh, Ju-Hwan;Lee, Yong-Bok;Yu, Chan;Kim, Pil-Joo
    • 한국환경농학회지
    • /
    • 제26권3호
    • /
    • pp.210-216
    • /
    • 2007
  • The cadmium (Cd) and zinc (Zn) contamination of soils and cultivated crop plants by zinc smelting activities was studied. In the study area of the vicinity of ${\triangle}{\triangle}$ zinc smelting factory in Korea, soils and corn plants were sampled at corn harvesting stage and analyzed Cd and Zn concentration as well as Cd and Zn fraction and chemical properties in soils. At 600 m radius of studied area, Cd and Zn were highly accumulated in the surface soils (0 - 20 cm) showed greater than the Korean warning criteria (Cd 1.5, Zn 300 mg $kg^{-1}$) with corresponding values 1.7 and 407 mg $kg^{-1}$, respectively. The leaf part gave higher Cd concentration with the corresponding value of 9.5 mg $kg^{-1}$ as compared to the stem and grains pare (1.6 and 0.18 mg $kg^{-1}$), respectively. Higher Zn concentration was also obtained from the leaf part of the corn plant which gave the value of 1,733 mg $kg^{-1}$. The stem and grain part gave corresponding values of 547 and 61 mg $kg^{-1}$. The order of the mean Cd concentration in fractions is F3 (oxidizable fraction) > F2 (reducible fraction) > F4 (residual fraction) > F1 (exchangeable + acidic fraction). A highly positive correlation is observed between F2 and concentration of Cd and Zn in both plant pare, leaf and grain. Highly positive correlations are shown in the pH exchangeable Ca and Mg, and CEC when correlated with Cd and Zn bound to F4 fractions. To reduce Cd and Zn uptake by corn plant in an arable land heavily contaminated with Cd and Zn as affected by smelting factory, an efficient and effective soil management to increase soil pH and CEC is thus recommended.

시멘트계 결합재로서 레미콘 슬러지의 재활용 방안에 관한 기초적 연구 (The Fundamental Study on Reusing Method of Ready-Mixed Concrete Sludge as Cement Binder)

  • 박진섭;서경호;김효열;강병희
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2004년도 학술대회지
    • /
    • pp.21-26
    • /
    • 2004
  • This study deals with the Hydrated Ability of the Ready-Mixed Concrete's Sludge which is the recycling technology of that sludge. The experiment gathers sludge from Ready-mixed factory. shatters these into pieces in dry condition and understands the differences between current using Portland cement. And then. this examines the possibility of the recycle as a bonding agent through the Compressive Strength and considers the recovery of the hydration. This experiment concludes the same Chemical Composition with the normal Portland cement. while. under the appropriate procedure in hydration recovery. this sludge can be used as the bonding agent in cement. The chemical composition of solid Remicon sludge shows that it has 1.8 times $SiO_2$ than the normal Portland cement. meaning lots of aggregate in Remicon sludge. Also. the specific gravity of Remicon sluge increases with the rise of Baking Temperature and has no difference between 2.77 and 2.94. The mortar flow used for combining the baking material of Remicon sludge does was not changed and is the highest between $750^{\circ}C{\cdot}120min\;and\;800^{\circ}C{\cdot}180min$. Additionally. the Compressive Strength increases with the age, certifying the same Hydrated Ability like cement and the best condition for hydration is $750^{\circ}C{\cdot}120min.$

  • PDF

미가공 잎담배 저장 중 색상, 화학성분 및 끽미 변화 (Changes of Chromatic, Chemical and Organoleptic Characteristics of Green Leaf Tobaccos during Storage in Warehouse)

  • 정기택;안대진;이종률;김상범
    • 한국연초학회지
    • /
    • 제24권2호
    • /
    • pp.88-93
    • /
    • 2002
  • This study was carried out to investigate the changes of chromatic, chemical and organoleptic characteristics of green leaf tobaccos during storage in warehouse. Eight grades(flue-cured ; A2O, B2O, C2L and D2L, burley ; A2T, B2T, C2W and D2W) of green loaves produced in 2001 were stored during 8 months(Oct. 30, 2001 to Jun. 30, 2002) in warehouse of Kimcheon(flue-cured) and Namwon(burley) Leaf Tobacco Processing factory, respectively. Moisture contents of D2L in flue-cured and four grades in burley were significantly decreased during storage in warehouse. Redness(a) values of six grades except for D2L and D2W were significantly increased during storage. Lightness(L), yellow(b) and pH values, and the contents of nicotine, total nitrogen and total sugar were not changed during storage. Irritations of flue-cured tobacco were increased, whereas tastes were decreased during storage. Irritations and tastes of burley tobacco were little changed during storage. The result suggests that the flue-cured green leaf being processed as early as possible for minimizing the deterioration of smoke taste during storage in warehouse.

작업장에서 사용 가능한 방독마스크 정화통 교체주기 프로그램의 개발(I) - 폐정화통을 이용한 파과시간 예측 실험 (Development of exchange period program for chemical cartridge feasible in the work spot (1) - Experiment of estimated breakthrough time using discarded cartridges)

  • 한돈희;이상영
    • 한국산업보건학회지
    • /
    • 제18권3호
    • /
    • pp.204-215
    • /
    • 2008
  • Many researches for service-life of chemical cartridges of respirators have been performed in many countries. On the result of these researches a few softwares programs were eventually developed to be used. In spite of that, it is difficult to apply these researches and softwares practically in the work spot because of too many factors that influence on service-life of chemical cartridges. This study was the first of two conducted for the purpose of developing program for estimating exchange period or service-life of chemical cartridges available feasibly in the workplaces. Collecting plan of cartridges discarded after use is in principle that three cartridges from three workers at a time, three steps of 1/2 exchange time due to smelling, just routine exchange time and 1.2 to 1.3 expanded time of routine exchange, total nine cartridges are collected in the same job site. 33 cartridges for organic vapor were collected in paint spray process of ship yard and paint factory, and 6 cartridges for acid were collected in plating process. These cartridges were analysed the remaining breakthrough time in 3M Innovation Center. Challenge vapor and breakthrough concentration were complied with Korean regulation for chemical cartridge respirators. Estimated breakthrough time was determined from previously used time plus breakthrough time for the remaining. Exchange period of cartridge would be the shortest time among three estimated breakthrough times. On the result breakthrough time for organic vapor was found to be relatively easily estimated, but that for acid aerosol or vapor was difficult to be confident. Even though this method was difficult to be precisely predicted exchange period of cartridge, it could be an alternative program practically available in the job site.

기능성 실란커플링제가 2-FCCL의 접착특성에 미치는 영향 (The Effect of Functionalized Organosilane Coupling Agent on the Adhesion Properties of 2 Layer Flexible Copper Clad Laminate)

  • 박진영;임재필;김용석;정현민;이재흥;류종호;원종찬
    • 폴리머
    • /
    • 제33권6호
    • /
    • pp.525-529
    • /
    • 2009
  • 우수한 성능의 2층 연성동박적층판(이하 FCCL)을 제조하기 위해서는 동박과 폴리이미드 사이에서 높은 접착력이 요구된다. 이를 위해 이종 재료로 인한 두 계면 사이의 접착력을 향상시키기 위해서는 일반적으로 기능성 실란커플링제가 사용된다. 본 연구에서는 압연동박과 폴리이미드 사이의 접착력 향상과 이미드화를 위한 고온의 열처리 조건에서도 안정한 새로운 형태의 실란커플링제를 합성하였다. 또한, 합성된 실란커플링제를 압연동박에 처리하였을 때, 표면처리제의 농도에 따른 표면변화를 관찰하였으며, 이로 인해 발생되는 접착력 변화를 확인하기 위해서 2층 FCCL을 제조하여 $90^{\circ}$ peel test를 통해 관찰하였다. 그리고, 두 종류의 폴리이미드를 이용한 FCCL에서 실란 커플링제가 접착력에 미치는 영향을 확인하였다.

식물공장 시스템에서 광원의 종류를 달리하여 재배한 브로콜리 새싹의 이화학적 특성 (Physico-Chemical Properties of Broccoli Sprouts Cultivated in a Plant Factory System with Different Lighting Conditions)

  • 김태수;이성표;박소이;이진영;이수연;전혜지
    • 한국식품영양과학회지
    • /
    • 제40권12호
    • /
    • pp.1757-1763
    • /
    • 2011
  • LED광원에 따른 건조한 브로콜리 새싹의 일반성분을 분석한 결과 광원에 따라 유의적인 차이를 나타냈으며, 구성당은 glucose가 2.94~3.12%로 가장 많았고, fructose는 1.54~2.04% 검출되어 총 2종이 검출되었다. 클로로필 함량은 WLD(일반광원)을 쬐인 브로콜리 새싹에서 총 클로로필 함량 $1,157{\pm}0.004$ mg%, 클로로필 a $777{\pm}0.01$ mg%로 높게 나타났다. 유기산은 총 2종의 유기산이 검출되었으며, citric acid, malic acid는 모든 시료에서 검출되었고, citric acid 함량은 908~1,136 mg%로 청색광원(BLD)에서 가장 높게 측정되었으며, malic acid는 514~834 mg%로 적색광원(RLD)에서 가장 높은 함량을 보였다. 무기질은 총 7종의 성분이 검출되었고, 이중 K 함량이 518 mg%로 가장 많았으며, 다음으로 Mg, Na 순이었고, Zn, Fe, Cu의 함량은 미량이었다. 비타민 A와 C 및 E 함량은 각각 RLD $860.62{\pm}0.02\;{\mu}gRE$, $134.570{\pm}0.14$ mg%, $1.44{\pm}0.1$ IU, BLD $432.48{\pm}0.05\;{\mu}gRE$, $137.05{\pm}0.1$ mg%, $1.11{\pm}0.12$ IU, RBLD $667.33{\pm}0.11\;{\mu}gRE$, $118.50{\pm}0.09$ mg%, $1.47{\pm}0.1$ IU, WLD $640.25{\pm}0.08\;{\mu}gRE$, $119.87{\pm}0.07$ mg%, $1.31{\pm}0.15$ IU이었다. 이상의 결과 브로콜리 새싹은 LED 광원에 따라 식물체가 발아하여 새싹으로 되면 발아와 함께 식물체 내 영양 화학적 성분에 큰 변화를 일으키는 것으로 나타났다.

의약품 원료 DIET 합성 중 H2O2를 이용한 붕소제거 반응공정에서의 폭주반응 위험성 평가 (Hazard Evaluation of Runaway Reaction in Deboronation Process Using H2O2 in DIET Synthesis of Pharmaceutical Raw Material)

  • 김원성;이근원
    • 한국가스학회지
    • /
    • 제22권4호
    • /
    • pp.49-54
    • /
    • 2018
  • 원료의약품 제조회사에서는 화학반응에 의해 제품이 생산되기 때문에 화학반응 전 단계인 원료 분말을 투입하는 과정에서 화재 폭발사고가 자주 발생하고 있다. 이에 대한 실질적인 화학반응 단계에서 사고원인 분석을 통한 안전대책 연구는 많지 않다. 본 연구에서는 화학반응 단계에서의 위험성을 알아보고자 붕소제거 반응공정에서 발열에 대한 실험을 진행했다. 연구대상 반응공정은 실제 원료의약품 공장에서 합성하고 있는 제품을 대상으로 반응열량계를 이용하여 열적 거동을 조사하였다. 실제 제조현장의 반응공정에서 냉각실패 등의 이유로 발열할 수 있는 합성반응의 최대온도와 기술적 근거에 의한 최대온도를 비교해서 위험도를 예측하였다. 이러한 결과를 가지고 실제 제조현장에 적용하여 발열에 따른 폭주반응 위험성을 제어하는 안전대책을 제시하였다.