• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.85-90
• /
• 1998

Reactive ion etching (RIE) of Ta-Al alloy thin film and SiO2 thin films was observed during the etching with the CF4 gas and the could be used effectively to etch the Ta-Al alloy thin film. The etching rate of the thin film at a Ta content of 50 mol% was about 67$\AA$/min. No selectivity between the Ta-Al alloy thin film and SiO2 thin films was observed during the etching with the CF4 gas and the etching rate of the SiO2 layer was 12 times faster than that of the Ta-Al alloy thin film. In addition, it was observed that photoresist of AZ5214 was more useful than Shiepley 1400-2 in RIE with the CF4 gas.

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.886-890
• /
• 2003

단결정 LiNbO$_3$를 helicon wave plasma 방법으로 식각시 bias power와 CF$_4$, HBr, SR$_{6}$가 혼합된 gas 유량에 따른 식각 속도와 rms roughness 값의 특성을 관찰하였다. 식각된 깊이는 surface profiler로 관찰하였으며 rms roughness 값은 Atomic Force Microscopy (AFM)으로 측정하였다. Bias power 증가함에 따라 500W에서 가장 높은 식각 속도와 가장 평탄한 표면형상을 얻을 수 있었으며, CF$_4$, HBr, SF$_{6}$ gas 유량을 각각 10～30 sccm으로 증가시킴에 따라 식각 속도는 CF$_4$, HBr, SF$_{6}$ gas 유량이 10 sccm, 30 sccm, 10 sccm에서 가장 높게 나타났으며, rms roughness 값은 CF$_4$, HBr, SF$_{6}$ gas 유량이 30 sccm, 10 sccm, 30 sccm에서 가장 낮은 표면 조도를 나타내었다.

• 분석과학
• /
• 제16권5호
• /
• pp.368-374
• /
• 2003

반도체 공정에서는 많은 종류의 가스를 사용하는 데 그중 할로겐 가스는 독성과 환경오염 문제를 야기 시키고 있다. 본 실험은 할로겐 가스를 기존의 제거 방식이 아닌 수지를 이용한 제거 방법 및 측정을 하는 연구를 하였다. 우선 실험에 사용한 할로겐 가스로는 $BCl_3$와 $CF_4$ 가스를 제거하는 실험을 하였다. 실험 장치는 실험조건을 고려하여 직접 제작을 하였다. 그리고 수지를 이용한 흡착 제거를 하기 위해 제올라이트, $Ag^+$ 이온으로 치환된 제올라이트, $AgMnO_3$, ZnO등 여러 가지 수지를 이용하여 실험하였다. 가스의 분석을 위해서 실제 사용되어지는 적외선 분광기 (FT-IR)를 이용하여 정성 및 정량분석을 하여 각각의 수지에 대한 할로겐 가스의 제거량을 계산하여 수지의 제거 능력을 확인하였다. 제올라이트, Ag 제올라이트, $AgMnO_3$, ZnO등의 수지중에서 ZnO가 가장 좋은 제거 효율을 보였으며 $BCl_3$ 가스의 경우 수지 1g에 대해 0.094 g을 제거하는 결과를 보였다. 그러나 $CF_4$ 가스는 일반적인 고체 수지는 제거를 하지 못하고 액체인 $CHCl_3$가 약간의 제거능력을 보이는 결과를 얻었다.

• 한국기후변화학회지
• /
• 제8권1호
• /
• pp.63-71
• /
• 2017

It is recognized that tetrafluoromethane ($CF_4$) has a great influence on global warming. The $CF_4$ is known to have a large impact on climate change due to its large global warming index. In this study, a waterjet plasma scrubber (WPS) was designed and manufactured for the $CF_4$ decomposition. The WPS is a novel technology which is combined a gliding arc plasma and water injection at the center of the plasma discharge. This can give an innovative way for $CF_4$ decomposition by achieving larger plasma columnand generating OH radicals. A performance analysis was achieved for the design factors such as waterjet flow rate, total gas flow rate, consumption electric power, and electrode gap. The highest $CF_4$ decomposition and energy efficiencies were 64.8% and 6.43 g/kWh, respectively; Optimal operating conditions were 20 mL/min of waterjet flow rate, 200 L/min total gas flow rate, 5.3 kW consumption electric power, and 4.4 mm electrode gap. As for the 2 stage reactor of the WPS, the $CF_4$ decomposition efficiency improved as the 85.3% while the energy efficiency decreased as the 5.57 g/kWh.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.52-55
• /
• 2000

In this study, (Ba,Sr)$TiO_3$(BST) thin films were etched with a magnetically enhanced inductively coupled plasma(MEICP) as a function Ar/$CF_4$ gas mixing ratio. Experiment was done by varying the etching parameters such as rf power, dc bias voltage and chamber pressure. The maximum etch rate of the BST films was 1700 ${\AA}/min$ under $CF_4/(CF_4+Ar)$ of 0.1, 600 W/350 V and 5 mTorr. The selectivity of BST to Pt and PR was 0.6, 0.7, respectively. X -ray photoelectron spectroscopy(XPS) studies shows that there are surface reaction between Ba, Sr, Ti and C, F radicals during the etching. To analyze the composition of surface residue remaining after the etching, films etched with different $CF_4$/Ar gas mixing ratio were investigated using XPS.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.866-869
• /
• 2001

In this study, (Ba,Sr)TiO$_3$(BST) thin films were etched with a magnetically enhanced inductively coupled plasma(MEICP). Etching characteristics of BST thin films including etch rate and selectivity were evaluated as a function of the etching parameters such as gas mixing ratio, rf power, dc bias voltage and chamber pressure. The maximum etch rate of the BST films was 1700 $\AA$/min at Ar(90)/CF$_4$(10), 600 W/350 V and 5 mTorr. The selectivity of BST to PR was 0.6, 0.7, respectively. To analyze the composition of surface residue remaining after the etching, samples etched with different CF$_4$/Ar gas mixing ratio were investigated with X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). From the results of XPS and SIMS, there are chemical reaction between Ba, Sr, Ti and C, F radicals during the etching and remained on the surface.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1504-1507
• /
• 2009

In this paper, the etching behavior of ZnO in $CF_4$ plasma mixed Ar was investigated. Previously, the etch rate in $CF_4$/Ar plasma was reported that it is slower than that in Cl containing plasma. But, plasma included Cl atom can produce the by-product such as $ZnCl_2$. In order to solve this film contamination, no Cl containing etching gas is required. We controlled the etching parameter such as source power, substrate bias power, and $CF_4$/Ar gas ratio to acquire the fast etch rate using a ICP etcher. We accomplished the etching rate of 144.85 nm/min with the substrate bias power of 200W. As the energetic fluorine atoms were bonded with Zinc atoms, the fluoride zinc crystal ($ZnF_2$) was observed by X-ray photoelectron spectroscopy (XPS).

• 한국표면공학회지
• /
• 제32권2호
• /
• pp.165-171
• /
• 1999

The etching reaction of $UO_2$ in $CF_4/O_2$ gas plasma is examined as functions of $CF_4/O_2$ ratio, plasma power, and substrate temperature at up to $370^{\circ}C$ under the total pressure of 0.30 Torr. It is found that the highest etching rate is obtained at 20% $O_2$ mole fraction, regardless of r. f. power and substrate temperature. The existence of the optimum $CF_4/O_2$ ratio is confirmed by SEM, XPS and XRD analysis. The highest etching reaction rate at $370^{\circ}C$ under 150W exceeds 1000 monolayers/min., which is equivalent to 0.4$\mu\textrm{m}$/min. The mass spectrometry analysis results reveal that the major reaction product is uranium hexa-fluoride $UF_6$. Based on the experimental findings, dominant overall reaction of uranium dioxide in $CF_4/O_2$ plasma is determined : $8UO_2+12CF_4+3O_2=8UF_6+12CO_{2-x}$ where $CO_{2-x}$ represents the undetermined mix of $CO_2$ and CO.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.388-392
• /
• 2002

In this work, the etching of $CeO_2$ thin films has been performed in an inductively coupled $Ar/CF_4/Cl_2$ plasma. The highest etch rate of the $CeO_2$ thin film ws 250 ${\AA}/min$ and the selectivity of CeO$_2$to SBT was 0.4 at a 10% additive $Cl_2$ into Ar/($Ar+CF_4$)gas mixing ratio of 0.8. From result of X-ray photoelectron spectroscopy (XPS) analysis, there are Ce-Cl and Ce-F bonding by chemical reaction between Cl, F and Ce. During the etching of $CeO_2$ thin films in $Ar/CF_4/Cl_2$ plama, Ce-Cl and Ce-F bond is formed, and these prodcuts can be removed by the physical bombardment of Ar ions. The 10% additive $Cl_2$ into the Ar/($Ar+CF_4$)gas mixing ratio of 0.8 could enhance the reaction between Cl, F and Ce.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.60-63
• /
• 1999

Ta-Al 합금 박막의 건식식각에 대하여 조사하였다. $CF_{4}$ 기체를 이용한 반응성 이온 식각(Reactive Ion Etching, RIE)이 1:1 조성의 Ta-Al 합금 박막의 식각에 적용될 수 있음을 확인하였으며, 식각속도는 $67{\AA}/min$으로 측정되었다. 그리고 $CF_{4}$ 기체는 Ta-Al 합금 박막과 $SiO_{2}$ 층간에 선택성이 없다는 것이 확인되었으며, $SiO_{2}$ 층의 식각속도는 Ta-Al 박막의 경우보다 약 12배 빠른 $800{\AA}/min$으로 측정되었다. 그 외에 $CF_{4}$ 기체를 이용한 반응성 이온 식각에서는 Shiepley 1400-27 Photo Resist 보다 AZ 5214 Photo Resist가 더 안정적이라는 것이 조사되었다.