• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.1-11
• /
• 2005

S-CDMA is the advanced physical layer modulation techniques of DOCSIS 2.0 specification. S-DMT is another challenging modulation technique for cable modem upstream channel due to the intrinsic robustness for fading and impulse noise. The BER performance of S-DMT and S-CDMA over the mixed channel model of AWGN and impulse noise were evaluated in comparison with TDMA. The mathematical BER derivation and the comparison of those three types of technique were performed based on the ${\varepsilon}-mixture$ non-Gaussian impulse noise model. The results of simulation show good compliance with those of analytic BER derivation. By the results of comparisons, it was verified that the performance of S-CDMA and S-DMT is almost the same, but the performance of S-DMT is far superior to that of TDMA at typical BER range of the practical data communications.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.760-764
• /
• 2000

In this paper, we compare the major issues associated with TDMA and S-CDMA, which is planned to be adopted as a new cable modem technique for upstream channel. In particular, we mainly deal with the following 3 topics: MAC protocol, modem structure and BER performance comparison between TDMA and S-CDMA.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.9-16
• /
• 2007

Currently, the measurement of RF parameters for a base station in operation is typically limited to easily measured forward path items. In this paper, the forward monitoring ports of base stations are used to measure the reverse RF performance. The system has been implemented and effectiveness has been proven on an operating base station. The receiver sensitivity is measured using an internal CDMA modem which is used to monitor the output power based on closed loop power control when the modem is connected to the base station via a voice call. In order to improve accuracy, in addition to the modem Tx adjust(TxAdj) parameter, the detector's actual measurement is used. For accurate receiver sensitivity, the measurement should be made when there is no traffic which is not possible on an operating base station. Therefore, pilot channel chip energy to received signal power spectral density ratio$(E_c/I_o)$ compensation method is used to offset the receiver sensitivity degradation with voice traffic increase.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.3
• /
• pp.159-164
• /
• 2006

Mobile communication with wireless modem can be powerful tool in web-based structural health monitoring system in which power and communication method are crucial points. In this study, the major reasons of side cracks in tunnel lining are studied by FEM analysis. In addition, a web-based monitoring system using mobile communication with wireless modem is applied to the tunnel structure to monitor the long term behavior of the side cracks. The field application shows that CDMA is useful method for structural health monitoring system which installed long distance away.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.213-219
• /
• 2010

Recently, a multi-core system is studied for single terminal's operations on various service networks for mobile systems. Therefore, it is expected that mobile systems capable of supporting WCDMA, MC-CDMA, CDMA and WiBro would be developed. Mobile systems for supporting various service networks is able to be implemented on a single chipset via SoC(System one Chip) technology, thus a noble modem design proper for SoC technology is necessary. For high speed data transmission of 4G mobile communication services, OFDM scheme has to be applied. But, an OFDM signal consists of a number of independently modulated subcarriers, and superposition of these subcarriers cause a problem that can give a large PAPR. In this paper, a noble modem design for 4G mobile communication services and PAPR reduction method for solving the PAPR problem are proposed.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.97-100
• /
• 2003

The quasi-complementary turbo codes (QCTC) proposed by Kim [1] is used for a fast hybrid ARQ scheme with incremental redundancy and adaptive modulation coding in the cdma2000 1xEV-DV [2]. The QCTC provides various code rates with good performance, a very simple encoder structure, and an inherent channel interleaving. It is shown that the QCTC is a unified scheme of channel coding and channel interleaving. In this paper, we introduce the properties of QCTC and various hybrid ARQ-QCTC schemes for the system.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.8
• /
• pp.41-50
• /
• 2012

Most of the developed countries and Korea have continued to invest much money in developing low-carbon vehicles such as electric car, methanol car and hydrogen car to replace the conventional fossil fuel vehicles. Government and local governments of each country, however, grope to construct roads for bicycle and public bicycle rental systems because bicycle is the only ultimate and feasible non-pollution transportation. Most of the current bicycle monitoring systems have achieved automation of rental process in bicycle stations, but they can not monitor bicycles in use. This paper develops GPS-CDMA modem combined terminals and implements a LBS-based bicycle monitoring system using them for public bicycle rental system. The monitoring system collects location information from GPS-CDMA modem combined terminals attached on bicycles and presents the moving tracks of bicycles on a GIS map for easy return and redistribution of bicycles. Also, the system helps to prevent from theft and vandalism of bicycles and to recommend the nearest bicycle station.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.5-8
• /
• 2001

SSB(Single Sideband) modulation scheme is high bandwidth efficient method in the mobile communication system compared with present DSB(Double Sideband) modulation scheme. Using the othogonality between inphase PN code and Hilbert transformed quadrature PN code, we propose phase estimation structure that enables coherent demodulation in the reverse link basestation receiver Several system characteristics, bit error rate and phase error variance, are simulated and compared with balanced QPSK DS/CDMA system. To verify system performance, SSB/BPSK-DS/CDMA test board is implemented using FPGA chips.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1254-1260
• /
• 2009

CDMA tele-Controller system is designed with a low power consumption 8 bit microcontroller, ATmega 2560. ATmega 2560 microcontroller consists of 4 UART (Universal asynchronous receiver/transmitter) ports, 4 kbytes EEPROM, 256 kbytes flash memory, 4 kbytes SRAM. 4 URAT is used for CDMA modem, communication for GPS module, EEPROM is used for saving a configuration for program running, a flash memory of 256 kbytes is used for storing a F/W(Firm Ware), and SRAM is used for stack, storing memory of global variables while program running. We have tested the communication distance between the coast station and sea by the fabricated control board using 800 MHz CDMA modem and GPS module, which is building for the navigational aid management system by remote control. As a results, the receiving signal strength is above -80 dBm, and then the characteristics of the control board implemented more than 10 km in the distance of the communication.

• The Magazine of the IEIE
• /
• v.25 no.5
• /
• pp.61-70
• /
• 1998