• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.45-49
• /
• 2013

This study aimed to determine heavy metal contents in sesame oil samples produced in Korea through microwave-assisted acid digestion without using an emulsifier. Three heavy metal, cadmium (Cd), lead (Pb) and arsenic (As) in twelve sesame oil samples were determined by ICP-MS. The validation of analysis method was checked by standard addition method (10 and $100{\mu}g/kg$). As a result, linearity ($R^2$) was above 0.999 and RSDs were lower than 4%. The recovery of Cd, Pb and As ranged between 98.5-101.6%, 100.3-101.3%, and 102.1-111.2%, respectively. The detected ranges in sesame oil samples were as follows; N.D. to $0.109{\mu}g/g$ for Cd, 0.014 to $0.200{\mu}g/g$ for Pb and 0.014 to $0.125{\mu}g/g$ for As, respectively. Therefore, sesame seeds and products grown in heavy metal-polluted regions which are used as food should be given priority attention and consideration.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.3
• /
• pp.11-21
• /
• 2022

The purpose of this study was to evaluate the influences of digestion temperature on the extraction of heavy metals from soil using the standard method established by Korean Ministry of Environment (KMES). A total of 7 heavy metals (As, Cd, Cr, Cu, Ni, Pb and Zn) in soil samples were extracted at varying digestion temperatures [(66 ± 2.0)℃, (73 ± 1.9)℃, (80 ± 1.3)℃, (85 ± 1.7)℃, (92 ± 2.0)℃, (98 ± 1.7)℃]. As, Cd, Cu, Pb and Zn concentrations remained relatively constant over the temperature range, but Ni and Cr concentrations greatly varied with the digestion temperature. The extent of variation in extraction efficiencies as compared to the concentration obtained at 66℃ was in following order; Ni (7.09% ~ 35.42%) > Cr (4.79% ~ 25.40%) > Zn (3.99% ~ 17.52%) > Cu (2.22% ~ 19.34%) > As (3.54% ~ 8.26%) > Cd (-5.08% ~ 1.08%) > Pb (-4.71% ~ -1.70%). The accuracy for certified reference materials at the digestion temperature of 80 and 85℃ was 98.7% ~ 105.8%. Therefore, digestion temperature of 80℃ ~ 85℃ is suggested to obtain reliable and reproducible data when the standard method by Korean Ministry of Environment is employed to analyze multiple heavy metal components in soil samples.

• Membrane and Water Treatment
• /
• v.13 no.4
• /
• pp.201-208
• /
• 2022

Emulsion Liquid Membrane (ELM) is a prominent technique for the separation of heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of the components (Surfactant and Carrier) of ELM is a very significant step for its preparation. In the ELM technique, the primary water- in-oil (W/O) emulsion is emulsified in water to produce water-in-oil-in-water (W/O/W) emulsion. The water in oil emulsion was prepared by mixing the membrane phase and internal phase. To prepare the membrane phase, the extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2- ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II). Emulsion Liquid Membrane (ELM) is a well-known technique for separating heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of ELM components (Surfactant and Carrier) is a very significant step in its preparation. In the ELM technique, the primary water-in-oil (W/O) emulsion is emulsified to produce water-in-oil-in-water (W/O/W) emulsion. The water in the oil emulsion was prepared by mixing the membrane and internal phases. The extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2-ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II).

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.464-471
• /
• 2002

Author applied several engineering methodologies to classical ultrasonic nebulizer to cope with it's demerits. After several trials and errors, we got the several meaningful results. To evaluate the modified ultrasonic nebulizer for inhalation toxicology of cadmium, author used light-scattering photometer. This paper is the one part of inhalation exposure systems for inhalation toxicology study of cadmium. According to the testing conditions, source temperature 50℃ and inlet-duct band temperature 150℃, aerosol generation results for sodium chloride and cadmium chloride were as followings: Coefficients of variation(CV) of sodium chloride and cadmium chloride for repeated trials were 3.38 and 4.77 for 10g, 2.47 and 5.02 for 5g, and 4.70 and 2.98 for 2.5g. All the CVs were within 10% of acceptance variability. Count Per Minute(CPM) changes of NaCl and CdCl₂ for 5 repeated trials were similar. CPM ratios of CdCl₂/NaCl were 1.13 for 10g, 0.76 for 5g, and 1.06 for 2.5g. Relative aerosol generation of cadmium chloride to sodium chloride was the highest in 10g. Efficiency increases of 24.50% for 5g NaCl, 14.91 % for 2.5g NaCl, and 16.48% for 2.5g CdCl₂ with respect to theoretical efficiency were observed but 0.04% efficiency decrease was observed in 5g CdC₂. According to the modifications of source temperature(20, 50, 70℃) and inlet-duct band temperature(20, 50, 100, 150, 200℃), aerosol generation results for NaCl and CdCl₂ were as followings: CPM trends for each quantity excepting 10g NaCl in inlet-duct band temperature 200℃ were similar, and the highest CPM was observed in source temperature 70℃ to each inlet-duct band temperature. The highest CPMs to 10, 5, and 2.5g NaCl were observed in source temperature 70℃ and inlet-duct band temperature 20℃. Aerosol generation of cadmium chloride was increased with the higher source temperature, excepting inlet-duct band temperature 200℃. The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this trend was similar to NaCl aerosol generation The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this result was similar to NaCl aerosol generation. Observed efficiencies of 5 and 2.5g NaCl were similar to ifs theoretical efficiency but -3.08% efficiency decrease of 5g CdCl₂, 17.47% efficiency increase of 2.5g CdCl₂ were observed. CPM ratio of CdCl₂/NaCl of 10g was different to 5 and 2.5g, and 2.5g ratio was higher than 5g ratio. In conclusion, to get maximum aerosol generation for NaCl and CdCl₂ will be the conditions that set the appropriate inlet-duct band temperature for each materials and increase the source temperature. Sodium chloride can be used to evaluate the performance and predict the concentration for cadmium aerosol in aerosol generator and inhalation exposure system.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.45 no.2
• /
• pp.93-98
• /
• 2022

To assess the feasibility of silk sericin for non-textile application, the storage stability and biological safety of sericin were examined. It was extracted at 37℃, 70℃, 100℃, and 121℃ for 1, 3, and 5 h to elucidate the effect of extraction condition on the stability and safety of silk sericin. The solubility was increased till approximately 26% with extraction temperature of 121℃ for 1 h. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed that the molecular weight distribution depended on the extraction conditions. Extracted sericin displayed typical UV absorption bands upon spectrometric analysis. To examine the reproducibility of its obtained conformation, sericin was extracted thrice and its circular dichroism (CD) spectra was measured each time. Most CD spectra showed reproducibility regardless of temperature and time except under 100℃ extraction condition. The diversity of CD spectrum showed gradual reduction and was finally coincident with extraction time from 1 to 5 h. Notably, sericin has a negative peak of approximately 200 nm attributed to random coil conformation, regardless of extraction condition. However, at the 100℃ extraction condition, sericin showed both bands to be negative bands of approximately 200 and 220 nm, respectively. Sericin was centrifuged to determine the stability of storage conditions. The sericin extracted at 100℃ and 121℃ for 1 h was found to form gel rapidly within 1 h, but at 121℃ condition, the gel fraction was approximately 20% within 1 h which retained its phase regardless of storage time. The gel fraction of sericin extracted at 100℃ for 5 h increased with time, however at the 121℃ for 5 h condition, the gel fraction was measured to be less than 10% regardless of increase in storage time. Petriflim^TM AC plates test showed that sericin was safe from aerobic bacteria activity by extraction under high temperature.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.201-210
• /
• 2008

The mixing treatment process using lime (CaO) and limestone ($CaCO_3$) as the immobilization amendments was applied for heavy metal contaminated filmland soils around Goro abandoned Zn-mine, Korea in the batch and pilot scale continuous column experiments. For the batch experiments, with the addition of 0.5 wt.% commercialized lime or limestone, leaching concentrations of As, Cd, Pb, and Zn from the contaminated filmland soil decreased by 70, 77, 94, and 95 %, respectively, compared to those without amendments. For the continuous pilot scale column experiments, the acryl column (30 cm in length and 20 cm in diameter) was designed and granulated lime and limestone were used. From the results of column experiments, with only 2 wt.% of granulated lime, As, Cd, and Zn leaching concentrations decreased by 63%, 97%, and 98%, respectively. With 2 wt.% of granulated limestone, As leaching concentration reduced from 135.6 to 30.2 ${\mu}g/L$ within 5 months and maintained mostly below 10 ${\mu}g/L$, representing that more than 46% diminution of leaching concentration compared to that without the amendment mixing. For Cd and Zn, their leaching concentrations with only 2 wt.% of limestone mixing decreased by 97%, respectively compared to that without amendment mixing, suggesting that the capability of limestone to immobilize heavy metals in the filmland soil was outstanding and similar to that of lime. From the column experiments, it was investigated that if the efficiency of limestone to immobilize heavy metals from the soil was similar to that of lime, the limestone could be more available to immobilize heavy metals from the soil than lime because of low pH increase and thus less harmful side effect.

• Journal of Sasang Constitutional Medicine
• /
• v.22 no.2
• /
• pp.93-100
• /
• 2010

1. Objectives: To compare the contents of hazardous substances such as crude, washing solution, crude after washing, decoction and remnant. 2. Methods: The heavy metal contents of each step were measured by inductively coupled plasma (ICP) spectrometer and mercury analyzer (MA-2). In order to analyze pesticides in Yanggyeoksanhwa-tang we used simultaneous multi- residue analysis of pesticides by GC/ECD, which was followed by GC/MSD analysis to confirm the identity of the detected pesticide in each sample. In addition, the contents of sulfur dioxide (SO2) were performed by Monier-Williams distillation method. 3. Results: 1) The mean values of heavy metal contents (mg/kg) for each steps in Yanggeoksanhwa-tang were as follows: crude (Pb; 1.87, As; 1.29, Cd; 0.28 and Hg; N.D.), washing solution (Pb; 1.98, As; 1.13, Cd; 0.10 and Hg; N.D.), crude after washing (Pb; 1.90, As; 1.40, Cd; 0.22 and Hg; N.D.), decoction (Pb; 1.90, As; 1.14, Cd; 0.11 and Hg; N.D.) and remnant (Pb; 2.39, As; 1.29, Cd; 0.25 and Hg; 0.01). 2) Contents (mg/kg) of residual pesticides in crude and decoction were not detected. 3) Contents (mg/kg) of sulfur dioxide (SO2) in crude, crude after washing and remnant exhibited 3.00, 2.00 and 2.00 mg/kg, respectively. However, contents of sulfur dioxide in washing solution and decoction were not detected. 4. Conclusions: These Results: will be used to establish a criterion of heavy metals, residual pesticides and sulfur dioxide of each step in Yanggeoksanhwa-tang.

• Journal of Society of Preventive Korean Medicine
• /
• v.8 no.2
• /
• pp.81-98
• /
• 2004

1. The cell viability was determined by MTT method. Their cytotoxic activities against three cancer cell lines such as A549, MDA-MB-231 and SNU-C4 cell line were tested. Among them, The methanol extract of Saururus chinensis Baill. showed the strongest cytotoxic effect against SNU-C4 cells. These results suggest that the methanol extract of Saururus Chinensis Baill. possessed a potential antitumorous agent. 2. In vitro the antitoxic activity of ethanol extract of Saururus Chinensis Bail on NIH 3T3 fibroblasts was evaluate by the MTT (3-(4,5-dimethyl- thiazol-2-yl)-2,5-diphenyl-2H-tetra캐lium bromide) and SRB (sulforhodamine B protein) assays. The number of NIH 3T3 fibroblasts were increased and tend to regenerate. These results suggest that Saururus Chinensis Bail extract retains a potential antitoxic activity. 3. Complexation of Cd (II) ion with ligands such as quercetin has been determined by UV-vis spectrophotometric method in tris buffer solution at various pH. It was found that only 1 : 1 Cd-complex is formed by the interaction between catechol moiety in ring B and cadmium [Cd(II)] in aqueous solution. The spectral parameters for Cd-complex were determined by Beer's law at various pH. It has shown that 1 : 1 Cd-complex has a maximum absorbance and red shift by the alkaline pH.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.98.2-98.2
• /
• 2012

Thin film solar cells are growing up in the market due to their high efficiency and low cost. Especially CdTe and $CuInGaSe_2$ based solar cells are leading the other cells, but due to the limited percentage of the elements present in our earth's crust like Tellurium, Indium and Gallium, the price of the solar cells will increase rapidly. Copper Zinc Tin Sulfide (CZTS) and Copper Zinc Tin Selenide (CZTSe) semiconductor (having a kesterite crystal structure) are getting attention for its solar cell application as the absorber layer. CZTS and CZTSe have almost the same crystal structure with more environmentally friendly elements. Various authors have reported growth and characterization of CZTSe films and solar cells with efficiencies about 3.2% to 8.9%. In this study, a novel method to prepare CZTSe has been proposed based on selenization of stacked Copper Selenide ($Cu_2Se$), Tin Selenide ($SnSe_2$) and Zinc Selenide (Zinc Selenide) in six possible stacking combinations. Depositions were carried out through RF magnetron sputtering. Selenization of all the samples was performed in Close Space Sublimation (CSS) in vacuum at different temperatures for three minutes. Characterization of each sample has been performed in Field Emission SEM, XRD, Raman spectroscopy, EDS and Auger. In this study, the properties and results of $Cu_2ZnSnSe_4$ thin films grown by selenization will be presented.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.2
• /
• pp.122-128
• /
• 2012

BACKGROUND: Mine drainage from metal mining districts is a well-recognized source of environmental contamination. Oxidation of metal sulfides in mines, mine dumps and tailing impoundments produces acidic, metal-rich waters that can contaminate the local surface water and soil. METHODS AND RESULTS: This experiment was carried out to investigate the pollution assessment of heavy metal on the water quality of mine drainage, paddy soils and sediment in lower watershed affected by mine drainage of the Sambo mine. The average concentrations of dissolved Cd (0.018~0.035 mg/L) in mine drainage discharged from the main waste rock dumps(WRD) was higher than the water quality standards (0.01 mg/L) for agricultural water in Korea. Also, the average concentrations of dissolved Zn, Fe and Mn were higher than those of recommended maximum concentrations (Zn 2.0, Fe 5.0, Mn 0.2 mg/L) of trace metal in irrigation water proposed by FAO (1994). The average contents of Pb and Zn in paddy soils was higher than those of standard level for soil contamination(Pb 200, Zn 300 mg/kg) in agricultural soil by Soil Environmental Conservation Act in Korea. Also, the concentrations of Cd, Pb and Zn in sediment were higher than those of standard level for soil contamination (Cd 10, Pb 400, Zn 600 mg/L) in waterway soil by Soil Environmental Conservation Act in Korea. The enrichment factor (EFc) of heavy metals in stream sediments were in the order as Cd>Pb>Zn> As>Cu>Cr>Ni. Also, the geoaccumulation index (Igeo) of heavy metals in stream sediments were in the order as Zn>Cd>Pb>Cu>As>Cr>Ni, specially, the geoaccumulation index (Igeo) of Zn (Igeo 3.1~6.2) were relatively higher than that of other metals in sediment. CONCLUSION(s): The results indicate that stream water and sediment were affected by mine drainage discharged from the Sambo mine at least to a distance of 1 km downstream (SN-1, SN-2) of the mine water discharge point.