• 한국식품위생안전성학회지
• /
• 제28권1호
• /
• pp.45-49
• /
• 2013

본 연구에서는 유화제를 사용하지 않고 초단파 산분해법을 이용해 우리나라에서생산된 참기름의 중금속을 측정하고자 하였다. ICP-MS를 통해 12개의 참기름 시료에 오염된 카드뮴, 납, 비소의 3종 중금속을 분석하였다. 분석법의 검증 결과 카드뮴, 납, 비소 모두 직선성($r^2$)이 0.99 이상이며 RSD는 4% 이하였다. 또한, 분석법의 정확성 및 효율성 측정을 위해 중금속 $10{\mu}g/g$과 $100{\mu}g/g$을 첨가한 시료를 분석한 결과, 회수율이 카드뮴 98.5-101.6%, 납 100.3-101.3%, 비소 102.1-111.2%로 우수하게 나타났다. 본 분석법을 이용하여 분석한 참기름 시료의 중금속 함량은 카드뮴 불검출${\sim}0.109{\mu}g/g$, 납 $0.014{\sim}0.200{\mu}g/g$, 비소 $0.014{\sim}0.125{\mu}g/g$이었다. 따라서, 중금속 오염지역에서 생산된 참깨 및 이를 이용한 가공품의 경우 섭취에 주의할 필요가 있다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권3호
• /
• pp.11-21
• /
• 2022

The purpose of this study was to evaluate the influences of digestion temperature on the extraction of heavy metals from soil using the standard method established by Korean Ministry of Environment (KMES). A total of 7 heavy metals (As, Cd, Cr, Cu, Ni, Pb and Zn) in soil samples were extracted at varying digestion temperatures [(66 ± 2.0)℃, (73 ± 1.9)℃, (80 ± 1.3)℃, (85 ± 1.7)℃, (92 ± 2.0)℃, (98 ± 1.7)℃]. As, Cd, Cu, Pb and Zn concentrations remained relatively constant over the temperature range, but Ni and Cr concentrations greatly varied with the digestion temperature. The extent of variation in extraction efficiencies as compared to the concentration obtained at 66℃ was in following order; Ni (7.09% ~ 35.42%) > Cr (4.79% ~ 25.40%) > Zn (3.99% ~ 17.52%) > Cu (2.22% ~ 19.34%) > As (3.54% ~ 8.26%) > Cd (-5.08% ~ 1.08%) > Pb (-4.71% ~ -1.70%). The accuracy for certified reference materials at the digestion temperature of 80 and 85℃ was 98.7% ~ 105.8%. Therefore, digestion temperature of 80℃ ~ 85℃ is suggested to obtain reliable and reproducible data when the standard method by Korean Ministry of Environment is employed to analyze multiple heavy metal components in soil samples.

• Membrane and Water Treatment
• /
• 제13권4호
• /
• pp.201-208
• /
• 2022

Emulsion Liquid Membrane (ELM) is a prominent technique for the separation of heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of the components (Surfactant and Carrier) of ELM is a very significant step for its preparation. In the ELM technique, the primary water- in-oil (W/O) emulsion is emulsified in water to produce water-in-oil-in-water (W/O/W) emulsion. The water in oil emulsion was prepared by mixing the membrane phase and internal phase. To prepare the membrane phase, the extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2- ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II). Emulsion Liquid Membrane (ELM) is a well-known technique for separating heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of ELM components (Surfactant and Carrier) is a very significant step in its preparation. In the ELM technique, the primary water-in-oil (W/O) emulsion is emulsified to produce water-in-oil-in-water (W/O/W) emulsion. The water in the oil emulsion was prepared by mixing the membrane and internal phases. The extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2-ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II).

• 동의생리병리학회지
• /
• 제16권3호
• /
• pp.464-471
• /
• 2002

Author applied several engineering methodologies to classical ultrasonic nebulizer to cope with it's demerits. After several trials and errors, we got the several meaningful results. To evaluate the modified ultrasonic nebulizer for inhalation toxicology of cadmium, author used light-scattering photometer. This paper is the one part of inhalation exposure systems for inhalation toxicology study of cadmium. According to the testing conditions, source temperature 50℃ and inlet-duct band temperature 150℃, aerosol generation results for sodium chloride and cadmium chloride were as followings: Coefficients of variation(CV) of sodium chloride and cadmium chloride for repeated trials were 3.38 and 4.77 for 10g, 2.47 and 5.02 for 5g, and 4.70 and 2.98 for 2.5g. All the CVs were within 10% of acceptance variability. Count Per Minute(CPM) changes of NaCl and CdCl₂ for 5 repeated trials were similar. CPM ratios of CdCl₂/NaCl were 1.13 for 10g, 0.76 for 5g, and 1.06 for 2.5g. Relative aerosol generation of cadmium chloride to sodium chloride was the highest in 10g. Efficiency increases of 24.50% for 5g NaCl, 14.91 % for 2.5g NaCl, and 16.48% for 2.5g CdCl₂ with respect to theoretical efficiency were observed but 0.04% efficiency decrease was observed in 5g CdC₂. According to the modifications of source temperature(20, 50, 70℃) and inlet-duct band temperature(20, 50, 100, 150, 200℃), aerosol generation results for NaCl and CdCl₂ were as followings: CPM trends for each quantity excepting 10g NaCl in inlet-duct band temperature 200℃ were similar, and the highest CPM was observed in source temperature 70℃ to each inlet-duct band temperature. The highest CPMs to 10, 5, and 2.5g NaCl were observed in source temperature 70℃ and inlet-duct band temperature 20℃. Aerosol generation of cadmium chloride was increased with the higher source temperature, excepting inlet-duct band temperature 200℃. The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this trend was similar to NaCl aerosol generation The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this result was similar to NaCl aerosol generation. Observed efficiencies of 5 and 2.5g NaCl were similar to ifs theoretical efficiency but -3.08% efficiency decrease of 5g CdCl₂, 17.47% efficiency increase of 2.5g CdCl₂ were observed. CPM ratio of CdCl₂/NaCl of 10g was different to 5 and 2.5g, and 2.5g ratio was higher than 5g ratio. In conclusion, to get maximum aerosol generation for NaCl and CdCl₂ will be the conditions that set the appropriate inlet-duct band temperature for each materials and increase the source temperature. Sodium chloride can be used to evaluate the performance and predict the concentration for cadmium aerosol in aerosol generator and inhalation exposure system.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제45권2호
• /
• pp.93-98
• /
• 2022

To assess the feasibility of silk sericin for non-textile application, the storage stability and biological safety of sericin were examined. It was extracted at 37℃, 70℃, 100℃, and 121℃ for 1, 3, and 5 h to elucidate the effect of extraction condition on the stability and safety of silk sericin. The solubility was increased till approximately 26% with extraction temperature of 121℃ for 1 h. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed that the molecular weight distribution depended on the extraction conditions. Extracted sericin displayed typical UV absorption bands upon spectrometric analysis. To examine the reproducibility of its obtained conformation, sericin was extracted thrice and its circular dichroism (CD) spectra was measured each time. Most CD spectra showed reproducibility regardless of temperature and time except under 100℃ extraction condition. The diversity of CD spectrum showed gradual reduction and was finally coincident with extraction time from 1 to 5 h. Notably, sericin has a negative peak of approximately 200 nm attributed to random coil conformation, regardless of extraction condition. However, at the 100℃ extraction condition, sericin showed both bands to be negative bands of approximately 200 and 220 nm, respectively. Sericin was centrifuged to determine the stability of storage conditions. The sericin extracted at 100℃ and 121℃ for 1 h was found to form gel rapidly within 1 h, but at 121℃ condition, the gel fraction was approximately 20% within 1 h which retained its phase regardless of storage time. The gel fraction of sericin extracted at 100℃ for 5 h increased with time, however at the 121℃ for 5 h condition, the gel fraction was measured to be less than 10% regardless of increase in storage time. Petriflim^TM AC plates test showed that sericin was safe from aerobic bacteria activity by extraction under high temperature.

• 자원환경지질
• /
• 제41권2호
• /
• pp.201-210
• /
• 2008

국내 폐광산 주변 중금속 오염 농경지 토양 복원을 위해 석회(CaO)와 분쇄한 석회암($CaCO_3$)을 안정화제로 이용한 토양 안정화 공법의 효율을 규명하는 배치 및 대형 칼럼실험을 실시하였다. 오염토양은 경북 군위군에 위치한 아연 폐광산 지역의 오염 농경지 토양을 이용하였으며, 안정화제의 함량은 오염토양 대비 0, 0.5, 2, 5%로 다양하게 적용함으로써, 안정화제에 의해 토양으로부터 용출되는 중금속 농도 변화를 시간에 따라 측정하여 안정화제의 중금속 저감 효율을 규명하였다. 배치실험 결과, 가루상의 석회나 석회암 0.5%를 토양과 혼합하여 안정화제로 사용한 경우, 오염토양으로부터 As, Cd, Pb, Zn의 중금속 용출 농도는 안정화제를 사용하지 않은 토양으로부터의 용출 농도를 기준으로 각각 70, 77, 94, 그리고 95% 감소하여 중금속 용출 저감 효과가 매우 높은 것으로 나타났다. 토양 객토법을 모사한 대형 칼럼실험 결과, 2% 입상 석회 첨가에 의해서 As, Cd, Zn의 토양 용출은 안정화제를 사용하지 않은 토양 용출 농도를 기준으로 각각 63, 97, 98% 감소하였다. 입상 석회암을 안정화제로 이용한 칼럼에서는 2% 석회암 첨가에 의해서 As 용출 농도는 135.6${\mu}g/L$에서 30.2 ${\mu}g/L$ 감소하여 약 46% 이상의 감소율을 나타내었으며, Cd와 Zn의 경우에는 97% 이상 감소하였다. 배치 및 칼럼실험 결과 석회암의 중금속 용출 저감 효율이 석회의 저감 효율과 매우 비슷한 것으로 나타나, 토양으로부터 중금속을 안정화시키는데 입상 석회와 석회암 모두 효과가 매우 좋은 것으로 나타났다. 토양 산성화 방지를 위해 토양개량제로 주로 사용하였던 석회의 과도한 토양 내 첨가가 토양의 급격한 pH 증가를 일으켜 농작물 재배에 악 영향을 주게 되는 한계를 극복하기 위하여, 본 배치 및 대형 칼럼실험을 통하여 토양 내 첨가에 의한 pH 증가가 거의 없으며 비용 측면에서도 석회보다 훨씬 저렴하지만 중금속 용출 저감 효과가 비슷한 석회암이 중금속 오염 농경지 토양 복원을 위한 새로운 안정화제로 유용하게 사용될 수 있음을 입증하였다.

• 사상체질의학회지
• /
• 제22권2호
• /
• pp.93-100
• /
• 2010

1. Objectives: To compare the contents of hazardous substances such as crude, washing solution, crude after washing, decoction and remnant. 2. Methods: The heavy metal contents of each step were measured by inductively coupled plasma (ICP) spectrometer and mercury analyzer (MA-2). In order to analyze pesticides in Yanggyeoksanhwa-tang we used simultaneous multi- residue analysis of pesticides by GC/ECD, which was followed by GC/MSD analysis to confirm the identity of the detected pesticide in each sample. In addition, the contents of sulfur dioxide (SO2) were performed by Monier-Williams distillation method. 3. Results: 1) The mean values of heavy metal contents (mg/kg) for each steps in Yanggeoksanhwa-tang were as follows: crude (Pb; 1.87, As; 1.29, Cd; 0.28 and Hg; N.D.), washing solution (Pb; 1.98, As; 1.13, Cd; 0.10 and Hg; N.D.), crude after washing (Pb; 1.90, As; 1.40, Cd; 0.22 and Hg; N.D.), decoction (Pb; 1.90, As; 1.14, Cd; 0.11 and Hg; N.D.) and remnant (Pb; 2.39, As; 1.29, Cd; 0.25 and Hg; 0.01). 2) Contents (mg/kg) of residual pesticides in crude and decoction were not detected. 3) Contents (mg/kg) of sulfur dioxide (SO2) in crude, crude after washing and remnant exhibited 3.00, 2.00 and 2.00 mg/kg, respectively. However, contents of sulfur dioxide in washing solution and decoction were not detected. 4. Conclusions: These Results: will be used to establish a criterion of heavy metals, residual pesticides and sulfur dioxide of each step in Yanggeoksanhwa-tang.

• 대한예방한의학회지
• /
• 제8권2호
• /
• pp.81-98
• /
• 2004

1. The cell viability was determined by MTT method. Their cytotoxic activities against three cancer cell lines such as A549, MDA-MB-231 and SNU-C4 cell line were tested. Among them, The methanol extract of Saururus chinensis Baill. showed the strongest cytotoxic effect against SNU-C4 cells. These results suggest that the methanol extract of Saururus Chinensis Baill. possessed a potential antitumorous agent. 2. In vitro the antitoxic activity of ethanol extract of Saururus Chinensis Bail on NIH 3T3 fibroblasts was evaluate by the MTT (3-(4,5-dimethyl- thiazol-2-yl)-2,5-diphenyl-2H-tetra캐lium bromide) and SRB (sulforhodamine B protein) assays. The number of NIH 3T3 fibroblasts were increased and tend to regenerate. These results suggest that Saururus Chinensis Bail extract retains a potential antitoxic activity. 3. Complexation of Cd (II) ion with ligands such as quercetin has been determined by UV-vis spectrophotometric method in tris buffer solution at various pH. It was found that only 1 : 1 Cd-complex is formed by the interaction between catechol moiety in ring B and cadmium [Cd(II)] in aqueous solution. The spectral parameters for Cd-complex were determined by Beer's law at various pH. It has shown that 1 : 1 Cd-complex has a maximum absorbance and red shift by the alkaline pH.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.98.2-98.2
• /
• 2012

Thin film solar cells are growing up in the market due to their high efficiency and low cost. Especially CdTe and $CuInGaSe_2$ based solar cells are leading the other cells, but due to the limited percentage of the elements present in our earth's crust like Tellurium, Indium and Gallium, the price of the solar cells will increase rapidly. Copper Zinc Tin Sulfide (CZTS) and Copper Zinc Tin Selenide (CZTSe) semiconductor (having a kesterite crystal structure) are getting attention for its solar cell application as the absorber layer. CZTS and CZTSe have almost the same crystal structure with more environmentally friendly elements. Various authors have reported growth and characterization of CZTSe films and solar cells with efficiencies about 3.2% to 8.9%. In this study, a novel method to prepare CZTSe has been proposed based on selenization of stacked Copper Selenide ($Cu_2Se$), Tin Selenide ($SnSe_2$) and Zinc Selenide (Zinc Selenide) in six possible stacking combinations. Depositions were carried out through RF magnetron sputtering. Selenization of all the samples was performed in Close Space Sublimation (CSS) in vacuum at different temperatures for three minutes. Characterization of each sample has been performed in Field Emission SEM, XRD, Raman spectroscopy, EDS and Auger. In this study, the properties and results of $Cu_2ZnSnSe_4$ thin films grown by selenization will be presented.

• 한국환경농학회지
• /
• 제31권2호
• /
• pp.122-128
• /
• 2012

폐금속 광산에서 유출되는 광산배수로 인한 하류 수계의 환경오염 영향을 검토하기 위하여 삼보광산 하류 수계 내 하천수질, 퇴적토양 및 인근 논토양에 대한 중금속 오염도를 평가한 결과는 다음과 같다. 삼보광산 주변 광미댐 침출수의 Cd 평균 농도(0.018~0.035 mg/L)는 우리나라 농업용수 수질기준(0.01 mg/L)을 초과하였고, 미량성분 중 Zn, Fe 및 Mn 함량도 FAO의 관개용수 최대 권고치(Zn 2.0, Fe 5.0, Mn 0.2 mg/L)를 초과 하였다. 광산 하류 논토양의 Pb, Zn 평균함량은 우리나라 농경지의 토양오염 우려기준(Pb 200, Zn 300 mg/kg)을 초과 하였고, 중금속 오염지수 평균치는 상리가 1.2로 내리지역0.45보다 높게 나타났다. 광산 하류 수계 내 퇴적토의 Cd, Pb 및 Zn 함량은 우리나라 하천용지의 토양오염 우려기준(Cd 10, Pb 400, Zn 600 mg/kg)을 초과하였다. 또한 퇴적토의 중금속 오염지수(PI)는 상리지역 0.98~7.32, 내리지역 0.34~5.27로 지점별 편차가 컸으며, 하류 1km 지점 합류지점(SN-1, SN-2)까지 오염된 것으로 나타났다. 퇴적토의 부화계수(EFc) 평균치는 Cd>Pb>Zn>As>Cu>Cr>Ni 순으로 지점간의 편차가 큰 것으로 나타났다. 퇴적토의 중금속별 지화학적농축계수(Igeo)는 지점별로 약간의 차이는 있으나 Zn>Cd>Pb>Cu>As>Cr>Ni 순으로 높았으며, 특히 Zn의 경우 광산 침출수 영향을 받은 퇴적토에서 경보오염에서 위험오염(Igeo 3.1~6.2) 상태로 심하게 오염된 것으로 나타났다. 결과적으로 삼보광산 하류 하천수질 및 퇴적토의 오염도 평가를 종합해 볼 때 광산 침출수의 영향이 하류 수계 1 km 이상(SN-1, SN-2)까지 미치는 것을 확인할 수 있었다.