• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.04a
• /
• pp.9-10
• /
• 2001

용융공정 $YBa_2Cu_3O_{7-x}$(123) 초전도체는 고자장 하에서도 통전특성이 우수하다 그러나 123 초전도체에는 미세균열이나 기공과 같이 초전도체의 통전특성에 유해 한 요인들도 다수 포함된다. 미세균열은 고온 정방정 상이 저온 사방정상으로 상변 태 시 발생하는 웅력에 의해 생성된다. 반면, 기공은 123 성형체를 녹이는 과정에서 123 상에 포함된 산소원자들이 격자로부터 이탈되고, 이 산소원자들이 모여 액상에서 기공을 형성한다. 제조공정에 따라 기공의 크기와 밀도가 다르지만 대략 수십 이크론 정도로 대단히 크다 생성된 기공 중 일부는 열처리 중에 소멸되나, 어떤 것들은 그대로 남아 초전도체의 치밀화를 방해한다. 본 연구에서는 123의 용융 및 $YBa_2Cu_3O_{7-x}$(211)과 액상으로의 분해 과정 및 포정반응과 관련된 미세조직을 조사하여 기공생성과 소멸과정을 조사하였고, 123의 최종 미세조직에 대한 기공의 영향에 대 하여 연구하였다. 열처리 스케쥴은 123-211-액상의 그림 l의 2원 상태도를 기초로 하여 결정하였다. 먼저 부분 용융상태에서의 기공의 분포를 알고자 시편을 105$0^{\circ}C$에서 0.5-1 시 간 유지한 후, 액체 질소통에 넣어 냉각하였다 (그림 2의 열처리 경로 CD)$\circled1$부분 용 융상태에서 급랭할 경우 211과 액상 상태가 그대로 유지되므로 액상에서의 기공분 포를 관찰할 수 있다. 또 다른 시편들은 그림 2의 @$\circled2$경로로 열처리하였다. 이 시편에서는 고온에서 생성된 211과 액상이 반웅하여 123 결정이 생성, 성장하므로 123 결정립 내의 기공분포를 알 수 있다. 그림 3은 시편에서의 기공과 액상포켓의 분포를 모식도와 각 부위의 미세조직 사진이다. 시편에는 산소가스 발생으로 인해 생성된 수형의 기공이 관찰된다. 기공은 시편의 중앙에 집중되며, 시편 바깥부분은 기공에 액상이 채워진 액상포켓이 관찰된다. 기공의 생성과 소멸과정은 다음과 같다. 출발물질인 123 분말이 211과 액상으로 분해될 때 산소가스가 배출되며, 이로 인해 액상에서 구형의 기공이 생성된다. 이들 중 일부는 액상으로 채워져 소멸되나, 나머지는 그대로 남는다. 특히, 시편 중앙에 서는 수십-수백 마이크론 크기의 커다란 기공이 다수 관찰된는데, 이는 기공의 합체로 만들어진 것이다. 포정반응 열처리 시 기공 소멸로 만들어진 액상포켓들은 주변 211 입자와 반응하여 123 영역으로 변한다. 이곳은 다른 지역과 비교하여 211 밀도 가 낮기 때문에, 미반응 액상이 남거나 211 밀도가 낮은 123 영역이 된다. 액상으로 채워지지 못한 구형의 기공들 중 다수가 123 결정 내로 포획되며, 그 형상은 액상/ 기공/고상 계면에너지에 의해 결정된다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.3
• /
• pp.77-84
• /
• 2006

The objective of this research is to evaluate various reclamation methods of sewage sludge cake after treating with microwave under optimum conditions. In this study the sewage sludge cakes used from S and N wastewater treatment plants in the P city. Microwave with an induced electricity heating way was employed for dehydration of sewage sludge cake. Microwave operation conditions is 2,450 MHz of frequency and the power with 1 to 4 kW. This sewage sludge cake had a moisture content of 70%. The moisture content of the sludge decreased notable up to 2%(wt) resulted in breaking of cell wall. When the treated sewage sludge cake mixed with soils could be applied to use midterm and last cover material soils. Moreover, the adsorption ability of heavy metals such as copper, lead, chromium and cadmium was greatly enhanced by treated sewage sludge cake. Within 30 minutes, 1ppm of copper, chromium and cadmium and 10ppm of lead with 1g of the treated sewage sludge cake in $100m{\ell}$ were below detection. It was possible to use the treated sewage sludge cake as an absorbent for absorption of toxic heavy metals. Results from this research indicated that using of microwave radiation was an effective method for treating sewage sludge cake economically and environmental. A point of view of reclamation, the treated sewage sludge cake appeared to be feasible with an adsorption of heavy metals in steady of using expensive yellow earth.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.7
• /
• pp.377-386
• /
• 2016

The purposes of this research are to examine soil pollution in the nation and to explore the contaminated soil management of the public housing agency in public land for residential development. In so doing, the primary and secondary data were utilized, the former made use of the public data annually released by the Korea Ministry of Environment, and the latter relied on a self-administerd questionnaire survey conducted in the staff of the public housing agency, particularly those in charge of soil contamination in large-scale land, housing and urban development projects. The findings reveal that the national concentrations of 21 inorganic and organic soil contaminants (e.g., Cd, Cu, As, Hg, Pb, Cr, Zn, Ni, F, P, PCB, CN, Phenol, BTEX, TPH, TCE, PCE, Benzo(a)pyrene, and pH) in the land were extracted to be well below the risk level designated by the statutory guidance while industrial areas had them at a relatively modest level. In addition, the survey results indicate that the public housing agency didn't establish specific and clear guidelines for soil pollution and its remediation in the residential land development, so that contaminated sites have been primarily remediated by outsourcing companies. As the unexpected occurrence of contaminated sites causes the incurring expenses added to total project budget, the provision of both professional training and on-site manuals with the sufficient information on techniques and methods of soil contamination is critical to promptly and systematically deal with soil pollution.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2
• /
• pp.217-225
• /
• 2020

Concrete waste accounts for approximately 70~80% of the total waste generated during the decommissioning of nuclear power plants (NPPs). Based upon the concentration of each radionuclide, the concrete waste from the decommissioning can be used in the determination of the clearance threshold used to classify waste as radioactive. To reduce the cost of radioactive concrete waste disposal, it is important to perform decontamination before self-disposal or limited recycling. Therefore, it is necessary to estimate the internal radioactivity distribution of radioactive concrete waste to ensure effective decontamination. In this study, the performance metrics of various Compton reconstruction algorithms were compared in order to identify the best strategy to estimate the internal radioactivity distribution in concrete waste during the decommissioning of NPPs. Four reconstruction algorithms, namely, simple back-projection, filtered back-projection, maximum likelihood expectation maximization (MLEM), and energy-deconvolution MLEM (E-MLEM) were used as Compton reconstruction algorithms. Subsequently, the results obtained by using these various reconstruction algorithms were compared with one another and evaluated, using quantitative evaluation methods. The MLEM and E-MLEM reconstruction algorithms exhibited the best performance in maintaining a high image resolution and signal-to-noise ratio (SNR), respectively. The results of this study demonstrate the feasibility of using Compton images in the estimation of the internal radioactive distribution of concrete during the decommissioning of NPPs.

• Analytical Science and Technology
• /
• v.27 no.2
• /
• pp.114-120
• /
• 2014

The aim of this study was to investigate of total ash, acid-insoluble ash and heavy metals content contained in commercial herbal medicines classified by parts used. A total of 1504 samples (84 species) purchased from markets in Seoul, are classified by five kinds of plant parts. The mean of total ash and acidinsoluble ash content (%) were as follows; Herba 9.0, 1.1, Caulis and cortex 6.1, 1.0, Flos fructus and semen 5.1, 0.8, Radix 4.6, 0.7 and Rhizoma 4.3, 0.4. The total amount of individual heavy metals content (mg/kg) (Pb, As, Cd and Hg) was high in Herba 1.13 and decreased in the order of Caulis and cortex 1.07, Rhizoma 0.91 and Radix 0.91, and was low in Flos fructus and semen 0.73. In addition, acid-insoluble ash contents was correlated with the total amount of individual heavy metals (r=0.314) (p<0.01).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.41-47
• /
• 2017

With the introduction of new technologies, ground weapons have led to the development of artificial intelligence and the attention of major developed countries. In this study, CFD was performed through the BLU-103 model to obtain aerodynamic data for aircraft that are subjected to rotational motion. To simulate the steady-state of a rotating body, the body was fixed and the principle of rotating the body by rotating the surrounding air was used. In order to examine the aerodynamic feasibility of the rotating aircraft, the analysis was carried out at intervals of $30^{\circ}$ angle from $0^{\circ}$ to $90^{\circ}$ for the simple shape and the side slip angle. It was confirmed that the drag coefficient for the simple model satisfies the quantitative results of 1.0 ~ 1.2 through CD presented in "Drag Book". The aerodynamic data was constructed by applying the valid input verified through the simple type analysis conditions to the actual shape, and the tendency was analyzed. The analysis confirmed that CX, CZ and CY increase not only in the simple model but also in the rotation of the actual model. Especially, the influence of CZ was judged to have contributed to the flight.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.6
• /
• pp.2277-2281
• /
• 2015

Objectives: To explore the expression of astrocyte elevated gene-1 (AEG-1) in cervical cancer and analyze its correlation with microvascular density (MVD), nuclear factor kappaB (NF-kB p65) and vascular endothelial growth factor (VEGF). Materials and Methods: Immunohistochemical MaxVision method was adopted to detect the expression level of AEG-1, NF-kB p65 and VEGF in 45 samples of invading cervical cancer and 12 samples of cervicitis from The First Affiliated Hospital of Wenzhou Medical University. Tumor microvascular endothelial marker CD34 combined with Weidner was used to determine the MVD in cervical cancer tissue. The positive expression and staining conditions of AEG-1, NF-kB p65 and VEGF in cervical cancer tissues were observed under a light microscope. Correlations between expression of AEG-1 protein and those of NF-Kb p65 and VEGF, as well as MVD, were analyzed using Pearson correlation. Results: The expression levels of AEG-1 were $0.186{\pm}0.043$ in cervical cancer and $0.051{\pm}0.002$ in chronic cervicitis (p<0.01). Moreover, expression of AEG-1 was related to vascular invasion and lymphatic metastasis of cervical cancer (p<0.01), but not with age of the patients, differentiation degree, tumour size, pathological type and parametrial infiltration (p>0.05). Pearson correlation analysis showed that the expression of AEG-1 was linked with NF-kB p65 (r=0.501, p=0.000), VEGF (r=0.718, p=0.000) as well as MVD in cervical cancer tissue (r=0.815, p=0.000). Conclusions: AEG-1 is highly expressed in cervical cancer and promotes angiogenesis, which might be related to the fact that AEG-1 activating the signal pathway of NF-kB could up-regulate the level of VEGF expression.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7651-7656
• /
• 2013

Background: Breast cancer is the most common malignancy among women in both developed and developing countries. The burden is increasing in low-income and middle-income countries (LMCs) and threatens the public health of such societies. Introduction of expensive monoclonal antibodies to cancer treatment regimens poses a real challenge in the health systems of LMCs. Despite controversy of cost-effectiveness of bevacizumab in breast cancer, some studies indicate gain of patients from this drug. The present study aimed to propose a priority setting model for administration of anti-angiogenic agents in breast cancer via assessment of tumor angiogenesis by the microvessel density (MVD) method and associations with clinicopathological characteristics (including simultaneous mutations of TP53 and HER-2 genes). Materials and Methods: Age, axillary lymph nodes status, tumor size, stage and grade, estrogen and progesterone receptors status, HER-2/neu status (by immunohistochemistry and FISH test), TP53 mutation, Ki-67 (for proliferation assay) and CD34 (for angiogenesis assay) were assessed in 111 breast cancer patients. The molecular subtype of each tumor was also determined and correlations of simultaneous mutations of HER-2 and p53 genes with angiogenesis and other clinicopathological characteristics were evaluated. Results: There were significant associations between simultaneous mutations of HER-2 and p53 genes and all other parameters except tumor size. The degree of angiogenesis in the ERBB2 subtype was greater than the others. Younger patients showed a higher angiogenesis rate rather those older than 50 years. Conclusions: Our results demonstrated that patients with simultaneous mutations of HER-2 and p53 genes, those with ERBB2 molecular subtype and also younger women (often triple negative) seem more eligible for obtaining anti-angiogenic agents. These results suggest a model for priority setting of patients with breast cancer for treatment with anti-angiogenic drugs in LMCs.

• Korean Journal of Psychosomatic Medicine
• /
• v.25 no.2
• /
• pp.193-199
• /
• 2017

Objectives : Insomnia may be one of the risk factor for suicidal ideation, but little is known about the mechanism by which sleep disturbances confer risk for suicide. The aim of this study was to investigate examine whether insomnia severity would be associated with resilience and suicidal ideation, and whether resilience would mediate the relationship between insomnia and suicidal ideation. Methods : A total of 432 community-dwelling adults(227 male, 205 female,) completed the self-report questionnaire that covered basic socio-demographic data. To assess the psychological variables, the following instruments were applied: Insomnia Severity Index(ISI), Korean Version of the Connor-Davidson Resilience Scale(K-CD-RISC), Beck Hopelessness Scale(BHOP) and Scale for Suicidal Ideation(SSI-Beck). People with an ISI score of 8 or higher were defined as insomnia. Results : Greater insomnia symptom severity was significantly associated with higher level of suicidal ideation and lower level of resilience, adjusting for hopelessness, age, sex, presence of family members living together, and household income. Additional analysis revealed that disturbance of sleep initiation and disturbance of sleep maintenance were significantly associated with suicidal ideation. Mediation analyses revealed that resilience significantly accounted for the relationship between insomnia symptom severity and suicidal ideation. Conclusions : These findings suggest that the evaluation and control of insomnia and resilience may be needed to reduce the risk of suicide.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.7
• /
• pp.469-475
• /
• 2014

The study investigated the physicochemical characteristics and the ecological risk of the Northport sediment in B city and the releasing properties of heavy metals into seawater during the resuspension also studied. The major components of the sediment are fine silt and clay which contains high organic matter and AVS (Acid volatile sulfide) and the ecological risk of the heavy metals in sediment also very high. The release rate of heavy metals into seawater was in order of Pb>>Cu>Cr>>Zn>Cd during the resuspension in a batch experiment, and the heavy metal release mainly attributed to the oxidation of metal sulfides. Heavy metals which came from easily oxidisable metal sulfides rapidly contaminated seawater within about 1.0 h of the sediment resuspension. The sulfide oxidation during the resuspension increased the residual fraction of heavy metals in the sediment, decreased the organic bound fraction, and changed the other fractions of heavy metals in the sediment. The release of heavy metals from the sediment during resuspension was affected by the resuspension time, the oxidation rate of metal sulfides and resuspended concentration of the sediment particle.