• 제목/요약/키워드: CD structure

검색결과 783건 처리시간 0.027초

열처리한 CdS 박막의 구조변환에 관한 연구 (A Study on the Phase Transition of Heat-Treated CdS Thin Films)

  • 김근묵;한은주
    • 한국재료학회지
    • /
    • 제9권8호
    • /
    • pp.782-786
    • /
    • 1999
  • 진공증착법으로 CdS 박막을 제작하여 열처리한 시료를 상온에서 SEM, XRD, EDX와 PL 특성을 측정하여 $50^{\circ}C 와 450^{\circ}C$ 사이에서 cubic to hexagonal phase transition을 확인하였다. 열처리 결과 S-빈자리에 $O_2$와 Si불순물이 보상되어 CdO 또는 $Cd_2SiO_4$주개준위(donor level)를 만드는데 광발광 측정에서 열처리온도 $350^{\circ}C$에서는 2.34eV, $550^{\circ}C$는 2.42eV에서 EE 피이크를 나타내었다. 이러한 특성결과 본 연구에서 결정구조변환 온도는 $370{\circ}C$를 나타내었으며 Ariza-Calderon 등의 CBD박막에 대한 결과인 $374^{\circ}C$와 유사한 것으로 확인되었다.

  • PDF

반도체 HgCdTe의 전자 밀도 분포와 결정 구조 (The electron density distribution and the structure of semiconductor HgCdTe)

  • Kook-Sang Park;Ky-Am Lee
    • 한국결정성장학회지
    • /
    • 제4권4호
    • /
    • pp.388-394
    • /
    • 1994
  • 단결정 Hg(1-x)Cd(x)Te (MCT,X=0,21)가 특수 제작된 고압로에서 Traveling Heater Method(THM)으로 성장되었다.X-선 회절 실험으로 MCT는 입방ZnS 구조임을 확인하였다. 측정된 격자상수는 $6.464 {\AA}$이엇으며, J.C.Wooley가 측정한 값과 비교하여 얻은 MCT의 성분비는 0.21이었다.MCT의 결정 구조를 분석하기 위하여 X-선 회절 강도로 부터 전자 밀도를 계산하였다.전자 분포 밀도도로 부터 MCT는 주로 공유 결합을 하고 있으며, 인접 원자들 상에는 사면체 구조를 이루고 있음을 알 수 있다. 격자 상수가 Vegard line으로 부터 편이 되는 원인은 성분비x가 증가될 때 원자간 거리 변화의 비선형적 증가로 판단되며, 이것은 결합 에너지와 관련될 것으로 추축된다.

  • PDF

n-CdS/p-InP 태양전지에 관한 연구 (A study on the n-CdS/p-InP solar cells)

  • 송복식;최영복;한성준;문동찬;김선태
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제8권4호
    • /
    • pp.406-412
    • /
    • 1995
  • A n-CdS thin films were evaporated by thermal evaporation method and their structure, optical transmission spectra and electrical characteristics were investigated. The photovoltaic characteristics of solar cells which were fabricated in optimum conditions measured. The evaporated CdS thin films showed in hexagonal structure and above 80% of optical transmission spectra regardless of impurity doping. The high quality thin films could be obtained at 150.deg. C temperature of substrate, which is useful for solar cell window layer with low resistivity of 6*10$\^$-2/(.ohm.-cm) by In doping We measured the electrical and optical characteristics of the n-CdS/p-InP heterojunction solar cells. The most efficient photovoltaic characteristics of heterojunction solar cells had the open circuit voltage of 0.66V, short circuit current density of 13.85mA/cm$\^$2/, fill factor of 0.576 and conversion efficiency of 8.78% under 60mW/cm$\^$2/ illumination.

  • PDF

Bi계 초전도 후막의 배향과정에 CdO 첨가의 영향 (The Effects of CdO Addition on the Orientation Process of Bi-Sr-Ca-Cu-O Supercoducting Thick Film)

  • 한영희;성태현;한상철;이준성;정상진
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
    • /
    • pp.47-50
    • /
    • 1999
  • The orientation mechanism of an amorphous $Bi_{2}$$Sr_{2}$$Ca_{2 x}$$Cd_{x}$$Cu_{3}$$O_{y}$ phase were studied by using the dilatometry. The amorphous $Bi_{2}$$Sr_{2}$$Ca_{2 x}$$Cd_{x}$$Cu_{3}$$O_{y}$ samples brought about a volume shrinkage at the onset of the crystallization of a $Bi_{2}$$Sr_{2}$$CaCu_{2}$$O_{6}$phase around $400^{\circ}C$. The random crystal growth of $Bi_{2}$$Sr_{2}$$CaCu_{2}$$O_{8}$ phase around $800^{\circ}C$. yielded a rapid volume expansion and after then samples shrinmed, accompanied with the crystal orientation. The$Bi_{2}$$Sr_{2}$$Ca_{2 x}$$Cd_{x}$$Cu_{3}$$O_{y}$ (x=0.4) sample exhibited the best-oriented structure because the liquid phase formed seemed to have the lowest viscosity which would contributed to the easy collapse of the card-house structure.

  • PDF

Thiocyanat 및 1,2-Diaminocyclohexane 리간드로 구성된 카드뮴(II) 착물의 합성 및 결정구조 (Synthesis and Crystal Structure of the Cadmium(II) Complex with Thiocyanate and 1,2-Diaminocyclohexane Ligands)

  • 김인회;서승욱;김종혁;김진규;서일환
    • 한국결정학회지
    • /
    • 제12권4호
    • /
    • pp.207-211
    • /
    • 2001
  • Cd(SCN)₂{CH/sub 6/H/sub 10/(NH₂)₂}₂(1) 착물을 합성하고 단결성 X-선 회절법으로 구조를 규명하였다. 이 착물은 단사정계, 공간국 P2₁/ space group with a=11.842(2), b=7.926(2), c=11.291(2) Å, β=106.73(3)°V=1014.8(4)Ų, Z=2 로 결정화되었으며, 1775 개의 독립적인 회절반점에 대한 최종 신뢰도 인자 R₁및 ωR₂값은 각각 0.0518 및 0.1315이었다. 착물의 결정 구조는 2개의1,2-Diaminocyclohexane리간드의 질소 원자 xy 평면에서 Cd(II) 금속원자에 chelate 되어 5-membered ring을 형성하며, 2개의 thiocyanate 리간드의 황 원자가 z 축 방향으로 Cd(II) 금속 원자에 트란스 형태로 결합함으로 써 z축 방향으로 약간 늘러진 팔면체 구조의 착물을 형성한다.

  • PDF

Chemical Bath Deposition 방법으로 CdSe 박막 성장과 광센서 특성 (Photosensor of properties for CdSe thin film grown by Chemical Bath Deposition Method)

  • 홍광준
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
    • /
    • pp.1-4
    • /
    • 2004
  • Polycrystalline CdSe thin films were grown on ceramic substrate using a chemical bath deposition(CBD)method. They were annealed at various temperature and X-ray diffraction patterns were measured by X-ray diffractometer in order to study CdSe polycrystal structure. Using extrapolation method of X-ray diffraction patterns for the CdSe samples annealed in $N_2$ gas at $450^{\circ}C$ it was found hexagonal structure whose lattice parameters $a_0$ and $c_0$ were $4.302{\AA}$ and 7.014 ${\AA}$, respectively. Its grain size was about 0.3 ${\mu}m$. Hall effect on this sample was measured by Van der Pauw method and studied on carrier density and movility depending on temperature. From Hall data, the mobility was likely to be decreased by piezo electric scattering at temperature range of 33K and 200K, and by polar optical scattering at temperature range of 200K and 293K. We measured also spectral response, sensitivity$(\gamma)$, maximum allowable power dissipation and response time on these samples.

  • PDF

지연시간의 변화를 고려한 연속미디어 표현 메카니즘의 설계 및 분석 (Design and Analysis of Continuous Media Representation Mechanism to minimize the Variance of Latency Time)

  • 여인국;황대훈
    • 한국정보처리학회논문지
    • /
    • 제2권5호
    • /
    • pp.787-796
    • /
    • 1995
  • 본 논문에서는 광디스크, 디지탈 테이프 등과 같은 제3의 저장 장치의 활용을 높 이기 위하여 다중의 디스크와 CD-ROM으로 구성된 저장구조를 제안하고, 이 구조에서 CD-ROM에 저장된 연속미디어 객체들을 효율적으로 표현하는 메카니즘을 설계한다. 본 논문에서는 제안한 연속미디어 저장 구조는 대역폭이 높은 SCSI 버스를 다중의 디스크 가 공유하여 데이타를 전송함으로써 정보의 검색 능력을 향상시킨다. 그리고 연속미디 어 표현 메카니즘은 CD-ROM의 연속미디어 객체의 인출과 표현을 병렬로 수행시켜 연속 미디어 표현의 불연속을 감소시킬 뿐만 아니라 자주 참조되는 객체를 디스크에 존재케 함으로써 재참조 요청에 대한 실기율과 서비스 시간의 변화를 최소화한다.

  • PDF

$CdS/CuInSe_2$태양전지의 Window Layer로 쓰이는 CdS박막의 진공증착법에 따른 전기적.광학적 성질 (Electrical and Optical Properties of Vacuum-Evaporated CdS Films for the Window Layer of $CdS/CuInSe_2$ Solar Cells.)

  • 남희동;이병하;박성
    • 한국결정학회지
    • /
    • 제8권2호
    • /
    • pp.105-110
    • /
    • 1997
  • CdS/CuInSe2 태양전지에서 창측재료로 1μm 두께의 CdS박막을 1x10-3mTorr의 진공하에서 CdS source 온도를 800-1100'C로 하고 기판의 온도를 50-200℃로하여 진공증차겁으로 제조하였다. 증착된 CdS박막의 구조적, 전기적, 광학적 특성조사는 x-ray diffractometer(XRD), scanning electron microscope(SEM), 전기비저항 측정, Hall measurement 그리고 optical transmission spectra로 행하였고, 각막들의 성분분석은 energy dispersive analysis of X-ray (EDAX)를 가하나, 광투과도는 감소하였다. 이때 증착된 CdS 박막들은 모두 hexagonal 구조를 가지고 있었으며, 결정성은 기판유리를 딸 (002)면으로 형성되었다. CdS Source 온도가 1000℃에서 증착된 CdS 박막이 0.9(S/cm)의 가장 높은 전기 전도도를 나타내었다. 또한 기판온도를 100'C로 제조한 CdS 박막이 전기비저항은 40(Ω,cm)이었고 광투과도는 80% 이상의 값을 나타내어 CdS/CuInSe2 태양전지의 창측재료로 적합했다.

  • PDF

Conformation of Substance P in Neutral Phospholipid Micelles

  • Kim, Seonggeum;Eunjung Bang;Kim, Yangmee
    • 한국자기공명학회논문지
    • /
    • 제2권1호
    • /
    • pp.41-49
    • /
    • 1998
  • A linear undecapeptide, Substance P (SP) is involved in a wide variety of physiological processes such as pain, inflammation, salivation, and hypertension. Tertiary structure of SP in dodecylphosphocholine (DPC) micelles has been investigated by CD, NMR spectroscopy, and DGII calculation. CD spectrum of SP in the presence of 7.5 mM DPC micelles does not show any favorable secondary structure. The tertiary structure determined by NMR spectroscopy and DGII calculation shows that the Phe7-Phr8-Gly9-Leu10 region adopts a turn structure, while the N-terminal region is quite flexible. Both prolines in SP exist preferentially as the trans isoforms and the aromatic ring of Phe7 protrudes outward. Conformation of SP may be restrained by the contact of the Phe7 aromatic ring with the hydrophobic side chains of the DPC micelles and this interaction induces a turn structure. Structure of SP in aqueous solution in the presence of DPC micelles can represent a good model to study the conformation recognized by the receptor near neutral membrane.

  • PDF

Electrochemical Characterization of Multilayered CdTe/PSS Films Prepared by Electrostatic Self-assembly Method

  • Rabbani, Mohammad Mahbub;Yeum, Jeong Hyun;Kim, Jungsoo;Nam, Dae-Geun;Oh, Weontae
    • Transactions on Electrical and Electronic Materials
    • /
    • 제15권5호
    • /
    • pp.257-261
    • /
    • 2014
  • Multilayered CdTe/PSS films were prepared by the electrostatic self-assembly method in an aqueous medium. Positively-charged cadmium telluride (CdTe) nanoparticles and anionic polyelectrolyte, poly (sodium 4-styrene sulfonate) (PSS) were assembled alternately in order to build up a multilayered film structure. A linear proportion of absorbance to the number of bilayers suggests that an equal amount of CdTe was adsorbed after each dipping cycle, which resulted in the buildup of a homogenous film. The binding energies of elements (Cd and Te) in multilayered CdTe/PSS film shifted from those of the CdTe nanoparticles in the pure state. This result indicates that the interfacial electron densities were redistributed by the strong electrostatic interaction between the oppositely-charged CdTe and PSS. Electrochemical properties of the multilayered CdTe/PSS films were studied in detail by cyclic voltammetry (CV).