• Title/Summary/Keyword: CCP

Search Result 293, Processing Time 0.026 seconds

중국공산당 이데올로기 전략의 효용성 연구 - 중국의 정치사상교육을 중심으로

  • Lee, Dong-Gyu
    • 중국학논총
    • /
    • no.68
    • /
    • pp.141-161
    • /
    • 2020
  • This paper aims to analyze China's political education, which plays a role of vehicle in the Chinese Communist Party (CCP) promoting its ideological strategy, in order to figure out the utility of the CCP's ideological strategy. After Reform and Opening Up, the CCP rebuilt and reinforced political education in China according to its ideological strategy. Especially after the Tiananmen incident in 1989, the CCP made nationalism and patriotism as the core part of political education, and expanded its curriculum. Such reinforcement of political education has a advantage in maintaining the CCP's governance by creating a nationalist consensus against the western ideas. Although it can be helpful for the stability of domestic politics, it also has negative possibilities which isolate China in the global community and obstruct China's development.

Performance analysis of call control processor according to SAAL funtion distribution in ATM switching system (ATM 교환기에서 SAAL 기능 분산에 따른 호처리 프로세서의 성능 분석)

  • 여환근;송광석;노승환;기장근
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.35S no.2
    • /
    • pp.31-39
    • /
    • 1998
  • In this paper, we have presented a quantitative performance effect of CCP(Call Control Processor) when SAAL(Signalling ATM Adaptation Layer) function is distributed from CCP to SIMs(Subscriber Interface Modules) in an ATM switching system with distributed architecutre. For the performance analysis, SLAM II simulation language is used and subscriber signalling messageand inter-processor communication messages according to Q.2931 based local call processing procedure are taken into consideration in the proposed queuing network model. The results of simulation are compared with in case of processing SAAL function on CCP. It is observed that the processing utilization of CCP reach 24,000 BHCA and 25,700 BHCAwhen SAAL function load amounts to 10% and 20% of the processing time of the total message, respectively. These values shows that the processing utilization of CCP is alleviated about 7% in comparison with 2,000 BHCA in case that SAAL function is carried out on CCP. Consquently, it is shown that we have to consider seriously how to distribute the functions concerning call processing in a large cale ATM switching system architecture accomodating a number of SIMs.

  • PDF

CANFLEX-RU(0.9%) 핵연료다발의 예비 열수력 특성 해석

  • 전지수;박주환;민병주;정창준;석호천
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1998.05a
    • /
    • pp.526-531
    • /
    • 1998
  • 본 논문은 농축도 0.9%의 순환우라늄 핵연료(CANFLEX-RU)에 대한 축방향 출력분포(AFD) 및 반경방향 출력분포(RFD) 특성을 조사하고 CANFLEX-RU 다발이 장전된 CANDU줄 채널의 예비 열수력 해석을 수행하였다. CANFLEX-RU 다발의 4 bundle shift 핵연료 교체 방법에 따라 AFD 분포 특성은 정점(Peak) 열속이 채널 상류쪽으로 이동하였고 채널 중심 부근에서 평탄하거나 다소 오목한 형상을 보여주었다. RFD 분포를 표현하는 적절한 변수로서 국부 다발열유속비를 정의하고, 이 비와 국부 표면열유속비의 상호 관계식을 도출하였다. 연소도에 따른 최외환봉의 국부 다발열유속비 변화를 조사한 결과로서, CANFLEX-RU 다발의 최대 국부 다발열유속비는 초기 연소도에서 발생되었고 이 값 CANFLEX-NU 다발 보다는 크고 37-핵연료봉다발 보다는 작았다. CCP 계산시에 RFD 분포 효과를 고려하는 방안으로서 최외환봉 열유속을 다발의 국부 열유속으로 가정하였다 이는 임계열유속이 -10.2% 감소한 조건을 사용하여 CCP를 계산하는 결과가 되었다. 다발-블균형 계수를 이용한 CCP 민감도 결과와 본 계산에서 얻은 CCP 결과에 의하면, CANFLEX-RU의 CCP 는 CANFLEX-NU에 비교해서 土1.0% 이내로 근사한 분포가 예상되었으며 이는 AFD 분포 효과가 RFD 분포에 의한 CCP 감소를 보상하기 때문이다. 결론적으로, CANFLEX-RU는 열수력적 설계 관점에서 CANFLEX-NU에 비교해서 열적 성능이 저하되지 않았고 따라서 기존 37-핵연료봉다발에 대한 CANFLEX-NU의 열여유도 증가와 같은 장점을 유지할 것으로 예상되었다.

  • PDF

A Robust Companding Scheme against Nonlinear Distortion of High Power Amplifiers (고출력 증폭기의 비선형 왜곡 특성에 강인한 Companding 기법)

  • Kim, Jae-Woon;Han, Seung-Woo;Shin, Yo-An
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.11C
    • /
    • pp.1079-1086
    • /
    • 2007
  • In this paper, we propose a CCP (Companding Combined with Predistorter) scheme that maintains BER (Bit Error Rate) performance of systems, while effectively reducing PAPR (Peak-to-Average Power Ratio) of OFDM (Orthogonal Frequency Division Multiplexing) signals, independent of nonlinear property of HPAs (High Power Amplifiers). The proposed CCP scheme combines the conventional companding scheme proposed by the authors with the predistorter, in order to prevent degradation of BER performance caused by signal distortion from nonlinear property of the HPA and the compression property of the companding scheme. Hence, the proposed scheme effectively reduces the PAPR and simultaneously maintains the BER performance, independent of nonlinear property of the HPA. Simulation results showed that the proposed CCP scheme provides the lowest total degradation for all the modulations, when comparing with the companding scheme proposed by Wang and the clipping scheme.

Plasma characterization of a mesh separated dual plasma source by L-probe and QMS

  • Kim, Dong-Hun;Choe, Ji-Seong;Kim, Seong-Bong;Park, Sang-Jong;Ju, Jeong-Hun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2015.08a
    • /
    • pp.156.2-156.2
    • /
    • 2015
  • 반도체 소자의 크기가 나노사이즈로 줄어들기 때문에, 건식식각의 중요성이 강조되고 있다. dual plasma source를 사용함으로써 plasma 밀도, 이온충돌에너지, 이온플럭스를 조절 가능하다. Low frequency로 이온에너지를 조절하고, high frequency로 이온플럭스를 일반적으로 조절한다. 본 연구는 inductively coupled plasma (ICP)와 capacitively coupled plasma (CCP)를 사용하는 dual plasma source이다. ICP는 AE RPS로 2.4 MHz를 사용하고, CCP는 AE RFX-600으로 13.56 MHz이다. single L-probe는 Hiden ESPion이고, quadrupole mass spectrometer (QMS)는 INFICON CPM-300이다. chuck에 CCP가 인가되고, ICP는 SUS mesh를 거쳐서 영향을 미친다. Gas는 Ar, Ar+CF4 두 조건에서 비료를 하였다. Single L-probe를 이용하여 플라즈마를 측정한 결과 CCP만 인가하였을 때, Te 2.05 eV, Ne 4.07E+10 #/cm3, Ni 5.82E+10 #/cm3의 결과를 얻을 수 있었다. ICP를 방전하고 mesh를 통해서 chuck으로 입사하는 이온을 측정한 결과 mesh에 의해 이온이 중성화되어 거의 입사하지 않음을 확인할 수 있었다. 최종적으로 이온의 영향이 상쇄되고, 라디칼의 영향이 증가하여 높은 etch rate와 선택비를 가지며, 등방성 식각의 영향이 커질 것으로 사료된다.

  • PDF

Development of an Hazard Analysis Critical Control Point (HACCP) Application Model for Dried Anchovy Workplace (마른멸치 작업장의 식품안전관리인증기준(HACCP)모델 개발)

  • YOON, Hyun-Jin;HAM, In-Tae;Kim, Sang-Hyeon;CHOI, Jong-Duck
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.28 no.3
    • /
    • pp.713-726
    • /
    • 2016
  • This study were attempted to apply the HACCP system adopted in the dried anchovy workplace to ensure the hygiene safety of dried anchovy workplace. In this study, HACCP system procedures, including HACCP team organization, determination of critical control point(CCP), establishment of critical limits, mornitering and verification etc., were established using KFDA 12 procedures. To determine whether hazards were critical elements, we evaluated the likelihood and seriousness of each hazard element. The likelihood of residual microorganism and metal piece exceeding the acceptable limit in dried anchovy products were demonstrated to be a critical hazard element. Management of the boiling(CCP-1B) and metal detection(CCP-2P) were determined to be a critical control point. The standards for acceptable residual microorganism and metal piece were set based on relevant laws and regulations, and then the limits were adapted and established for the CCP. An HACCP plan applicable to dried anchovy workplace was established.

Development of high-precision high-voltage CCPS (4세대 가속기 고정밀 고전압CCPS 개발)

  • Moon, Yong-Jo;Park, Soung-Soo;Kim, Sang-Hee;Kwon, S.J.;Jang, S.D.;Lee, B.J.;Lee, H.S.;Kang, H.S.;Whaung, J.Y.;Kim, D.S.;Lee, S.Y.;Shin, H.S.;Jang, K.Y.;Roh, S.C.
    • Proceedings of the KIPE Conference
    • /
    • 2012.07a
    • /
    • pp.172-173
    • /
    • 2012
  • 포항가속기 연구소에서는 4세대 가속기의 전자를 가속시키기 위해서 100ppm(0.01%) 이하의 고전압 안정도를 가진 200MW 펄스 모듈레이터가 요구된다. 그러므로 본 연구소에서는 고전압 안정도를 가진 고정밀 고전압 CCPS를 일반 CCPS와 병행하여 산업체와 함께 공동 개발을 진행하였다. 개발된 일반 CCPS의 사양은 50 kV, 30 kJ/sec, 600mA, 1000ppm이하이고, 고정밀 CCPS의 사양은 50 kV, 5 kJ/sec, 100mA, 100ppm이하이다. 본 논문에서는 CCPS의 개발 및 실제 모듈레이터에 설치하여 시험한 결과를 발표하고자 한다.

  • PDF

Consultative Democracy in Contemporary China: From a Perspective of Popular Sovereignty (인민주권론의 관점에서 본 중국 협상민주주의(协商民主))

  • Yoo, Eunha
    • Analyses & Alternatives
    • /
    • v.4 no.1
    • /
    • pp.39-61
    • /
    • 2020
  • The Chinese Communist Party's 'with-Chinese-characteristics' discourse proclaims its superiority in reflecting people's genuine needs without poisonous partisan politics, as in Western democracies. The Party's Consultative Democracy is key to this superiority. To evaluate Consultative Democracy in Contemporary China from a perspective of popular sovereignty, which is the essential purpose of every kinds of democracy, this research looks into Consultative Democracy from two dimensions: theoretical dimension and institutional dimension. Theoretically, CCP's Consultative Democracy seeks its theoretical sources from their traditional thought as well as from Marxism, and especially emphasizes CCP's leadership to fulfill the consultation results. And through the analysis of various field investigations, we find that there are some prominent problems in grass-roots society's institutional mechanism for Consultative Democracy, such as insufficient connection between institutional innovation and existing legal system, inefficient consultation, insufficient representation of consultative subjects and weak motive force for sustainable development. By legitimizing certain groups or individuals as representatives in their consultative process, CCP can be de-legitimize by containing, dividing or denouncing others so that critics can be co-opted, neutralized or isolated. The CCP's consultative and representational processes are different from taking policy inputs as dialogue or negotiation as in democracies, it is a dynamic, largely one-way process of enforcement and direction with a clear political agenda: maintaining Party hegemony.

  • PDF

DSMC 방법을 이용한 극 저압 CCP 챔버 내의 유동 해석

  • Kim, Jin-Seok;Song, In-Cheol;Heo, Min-Yeong;Lee, Ho-Jun;Lee, Hae-Jun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.532-532
    • /
    • 2013
  • 세계의 반도체, 의료, 금속, 섬유 등의 분야에서 기술이 고도화됨에 따라서 나노 입자, High quality 박막 등에 대한 수요는 커져가고 있다. 이를 제조하기 위한 공정은 극 저압 상태에서 이루어진다. 따라서 극 저압 기체 흐름에 대한 이해는 필수적이다. 하지만 일반적으로 수 mTorr 이하의 압력에서는 유체 시뮬레이션으로 해석하는 것이 불가능하다. 그러므로 우리는 DSMC 방법을 이용하여 극 저압 CCP 챔버 내의 기체의 흐름을 해석하고 특성을 살펴보았다.

  • PDF

A clustered cyclic product code for the burst error correction in the DVCR systems (DVCR 시스템의 연집 오류 정정을 위한 클러스터 순환 프러덕트 부호)

  • 이종화;유철우;강창언;홍대식
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.34S no.2
    • /
    • pp.1-10
    • /
    • 1997
  • In this paper, an improved lower bound on the burst-error correcting capability of th ecyclic product code is presented and through the analysis of this new bound clustered cyclic product (CCP abbr.)code is proposed. The CCP code, to improve the burst-error correcting capability, combines the idea of clustering and the transmission method of cyclic product code. That is, a cluster which is defined in this paper as a group of consecutive code symbols is employed as a new transmission unit to the code array transmission of cyclic product code. the burst-error correcting capability of the CCP code is improved without a loss in the random-error correcting capability and performance comparison in the digital video camera records (DVCR) system shows the superiority of the proposed CCP code over conventional product codes.

  • PDF