• Transactions on Electrical and Electronic Materials
• /
• v.8 no.4
• /
• pp.166-169
• /
• 2007

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7 ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.181-185
• /
• 2019

In this study, Exit light installed in offices, malls, hospitals, and factories were analyzed to analyze the luminance performance of CCFL and LED light sources. In addition, fire protection products with electrical characteristics such as Exit light may change their performance due to ambient temperature, humidity, and dust. So it was extracted by installation place and analyzed its characteristics. As a result of the experiment, Exit light for CCFL type showed the value of 'ratio of luminance 2' for large, medium and small. Considering that the reference value was 'lower than 9', the value was very good and it can be seen that there is almost no change in ratio of luminance due to aging. The Exit light for LED type showed a value of 'ratio of luminance 5', which means that the light on the display surface is not uniform. In addition, there was almost no change in ratio of luminance due to ageing, but the ratio of luminance was larger than Exit light for LED type. This is an unsatisfactory result from a visual point of view. To improve this, it is necessary to disperse the light of LED light source and strengthen the regulation on ratio of luminance.

• Information Display
• /
• v.5 no.5
• /
• pp.13-18
• /
• 2004

액정 디스플레이(LCD)의 대형화 및 저가격화와 더불어 전체 소비전력의 90% 이상, 모듈(module) 원가의 50% 이상을 차지하는 백라이트에 대한 연구가 활발히 진행되고 있다. 이에 기존의 냉음극 형광램프(CCFL)뿐만 아니라 원가 절감 및 특성 향상 기술로서 외부전극 형광램프(External Electrode Fluorescent Lamp), 면광원(Flat Fluorescent Lamp), 발광 다이오드 (Light Emitting Diode), 전계 방출램프(Field Emission Lamp) 등에 대한 개발이 활발히 진행되고 있는 바 이와 같은 다양한 기술의 경쟁을 통하여 보다 고품질 및 저원가 백라이트의 개발이 가능하여 액정 디스플레이의 경쟁력을 확대시킬 것으로 예상된다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.72-75
• /
• 2007

본 연구는 TFT-LCD 부품인 Back Light Unit의 광원 역할을 하는 CCFL Assembly 공정을 분석하여 최적의 공정원 배치를 할 수 있도록 하였다. 이에 각 공정의 특성을 파악하고, 이를 Herrmann의 두뇌우성을 적용하여 공정원 배치를 하도록 하였다.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.5
• /
• pp.215-217
• /
• 2007

Recently, color reproduction properties have attracted lots of attention with mass production of LCD especially corresponding to TV application and achievement of color reproduction properties such as CRT have been considered one of technical goals for high quality display. However, revision of the color reproduction properties only with CF(color filter) have fundamental limitations and resultant decrease in the transmittance of panel causes demand on high brightness of BL(Back Light). In this paper, we present such a method in which by optimization of original light spectrum from the BL source will improves the color reproduction properties corresponding to them of the CRT. When the intensity of RED and Green-Blue from ramp is revised densely, the characteristics different from CCFL(Cold Cathode Fluorescent Lamp) used before become added so that about 11 % of the color reproduction properties is improved compare to the existing LCD panel.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.61-65
• /
• 2011

Recently, LCD (liquid crystal display) industry is needed to goods of high reliability and wide range temperature condition and it is interested in products for extremely cold condition without failure of light-up. In this experiment, we made the LED backlight unit for Automotive-navigation under the extremely cold condition. And for making this backlight unit, we used to eight side emitting type white LEDs with 3W high power LED. We could know that this backlight unit releases to 18,000 nit in 24W power consumption and start up voltage time is under the 1ms in the ambient temperature at -40.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.277-280
• /
• 2007

Field emission-back light unit (FE-BLU) was fabricated using carbon nanotube (CNT) emitter. Local dimming and local brightening techniques were achieved, which results in very high contrast ratio. In addition, the motion blur phenomenon, one of the serious problems of liquid crystal display (LCD) with cold cathode fluorescent lamp (CCFL)-BLU, was removed from LCD-TV by using FE-BLU.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.69-72
• /
• 2009

Recently, LED(Light Emitting Diode) TV has attracted greate attention due to its super-slim form factore as well as low power consumption. LED TV is actually an LCD(Liquid Crystal Display) TV in which edge-lit LED backlight is adopted. In the presente study, we report on the comparison of optical characteristics 55-inch edge-lit LED backlight and CCFL(Cold Cathode Fluorescent Lam)backlight. The angular distribution of the luminance and the on-axis luminance gain on each optical component were investigated and compared. The effect of the backlight structure on the performance of the optical films was studied and discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1607-1610
• /
• 2007

The measurement technology of the electrical and optical properties of CCFL and EEFL for LCD-BLU is investigated. The lamp current and voltage are affected by the leakage of parasitic capacitance. The methods using the photometer and the integrating sphere are compared to determine the lamp efficiency.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.239-241
• /
• 2006

본 논문에서는 Liquid crystal display (LCD) Backlight module중에 Cold cathode fluorescent lamp (CCFL)를 포함한 인버터가 가지고 있는 기생 용량 측정 방법을 고안하였다. CCFL의 부성 저항 특성을 고려하여 램프의 정적 저항 성분을 일정하게 유지시키고 입력 전압 대 출력 전압의 비 중 최대 Gain을 갖는 주파수를 찾아내 기생 용량을 계산하는 Algorithm을 완성하였다. 시뮬레이션과 실험 결과를 통해 비교 검증함으로써 측정 방법의 유효성을 입증하였다.